XTOOL
IKIER
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
xTool F1
XTool P2
xTool D1 Pro 40W + 10W Kit
xTool D1 Pro
xTool M1
Air Assist Set
Honeycomb Panel Set
Extension Kit
Motheboard
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
New! SCULPFUN S30 Ultra
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
-23%
2004 LCD Display RepRapDiscount Smart Controller with Adapter
Original price was: ₹669.00.₹499.00Current price is: ₹499.00. Incl GST (₹422.88 +18%GST)
4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable
Original price was: ₹250.00.₹199.00Current price is: ₹199.00. Incl GST (₹168.64 +18%GST)
Uno R3 with ATmega328P with A6-A7 pins MicroUSB CH340G
Original price was: ₹1,299.00.₹999.00Current price is: ₹999.00. Incl GST (₹846.61 +18%GST)
- This is UNO R3 ATmega328P CH340G USB Driver Development Board, and it is an SMD
- Arduino Compatible UNO R3 SMD Version
- It has additional holes to mount male pins, on all connectors, adjacent to female header, so that we can use female-to-female connectors to link up other accessories having male header pins.
- There were extra holes next to ICSP connector for Tx, Rx, +5V, 3.3V and SCL, SDA.
- Fully Compatible with Windows 7, 8 and above
In stock
In stock
Check Estimated Delivery at
Shipping to IN
10
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
This product is an optimized clone of Arduino UNO R3 , it delivers best product quality and function under demanding conditions designed to ensure both consistent and compatible with the official boards, but also easy to use.
Feature:
- Compatible with Arduino Uno R3 board. Built on the ATmega328 microcontroller and USB-UART interface chip CH340G.
- Board for functionality similar to the Arduino Uno (ATmega 28).
- It is a budget, but the same stable, and uses the original chips ATmega328 (16 MHz).
- The board used the chip CH340G as converter UART-USB. Chip CH340G – is a budget solution. When you work in the frequency 12Mhz, giving a stable result of data exchange (need install drivers to computer).
Uno R3 CH340G/ATmega328 – connects to the computer via micro USB cable (used for almost all Android smartphones). - You can supply power to board through a Micro USB connector or DC power socket.
- The voltage regulator (LDO) can deal with incoming voltage from 6V to 12V DC.
- Output current for 5V – about 800mA, for 3.3V – about 180mA (Please note that the higher the input voltage the lower the outgoing current).
- That will provide a reliable power most of your initial projects.
Package includes:
- Uno R3 with ATmega328P with A6-A7 pins Micro USB CH340G (Without USB Cable -1Pc
15 Days Warranty
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Mechblock customers from any kind of manufacturing defects. Â Reimbursement or replacement will be done against manufacturing defects.
What voids warranty:
If the product is subject to misuse, tampering, static discharge,mishandelling of the product, accident, water or fire damage, use of chemicals & soldered or altered in any way.
47 reviews for Uno R3 with ATmega328P with A6-A7 pins MicroUSB CH340G
Clear filters
Welcome to mechBlock.in / Sun Enterprises We are a leading engineering and technology company based in India that specializes in cutting-edge mechanical and robotic solutions. Founded in 2020, our mission is to design and develop innovative systems that can help our clients improve efficiency, reduce costs, and enhance performance.
Our team of highly skilled engineers and technicians have extensive experience in the field of mechanical engineering, robotics, and automation. We have the knowledge and expertise to design, develop, and implement complex systems that can meet the unique needs of our clients.
We work with a wide range of industries including manufacturing, transportation, construction, and logistics to provide customized solutions that can improve productivity, safety, and performance. Our solutions range from advanced robotic systems to precision-engineered mechanical components, and everything in between.
We believe in delivering quality work and providing excellent customer service. We work closely with our clients to understand their requirements and deliver solutions that exceed their expectations. Our portfolio includes a wide range of successful projects, from automated assembly lines to precision robotic systems.
Our goal is to be the go-to partner for companies that want to leverage the latest mechanical and robotic technologies in India. We’re always looking for new challenges and opportunities to collaborate with companies that share our vision of a smarter and more efficient future.
More Products
UNO R3 Development Board Improved ATmega328P Type C Interface
In stock
₹650.00 Incl GST (₹550.85 +18%GST)
SKU:
120501005
Brass Heat-Set Knurled Inserts 2pcs
In stock
₹79.00 – ₹99.00
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
Inset-Knurled
ATOMSTACK R3 24W Automatic Rotary Roller for Laser Engraving Machine
In stock
₹11,990.00 Incl GST (₹10,161.02 +18%GST)
SKU:
ATOMR324W
Twotrees MK8 Silicone Sock Cover Case for MK8 Extruder Block
In stock
₹140.00 – ₹150.00
Black
Blue
BROWN
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
TT-MK8Sock
Plastic Hinge for V-Slot 2020/3030/4040/4545
In stock
₹70.00 – ₹164.00
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
MOHD0036P-1D
Thrust Ball Bearing
In stock
₹140.00
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
BE0009
Naresh Karthick (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Anusha Anand –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Satyendra Bhatt (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Lokesh Pandey (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Mina (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Jagdish Gandhi (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Siya Kohli (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Pooja Rawat (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Ahilan Pandey (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Rabindra Dhir (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Abhisumat Garg (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Pankaj Rai (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Hira Mittal (verified owner) –
Ranju Jain (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Angee Ganguly (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Puja Mishra (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Darshit Mishra (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Parvin Sundar (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Suraj Nair (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Durga Saxena (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
varun Sood (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Aayansh Pandey (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Shital Sharma (verified owner) –
Minu tripathi (verified owner) –
Mary Philips (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Moti Mala (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Atul Jha (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Chandrakant Tayal (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Ramila ben (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Bhadrak Chaturvedi (verified owner) –
Palana Saini (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Pushkar Karthick (verified owner) –
Rajni Sharma (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Akilesh Mishra (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Harsith Patel (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Ramchandra Tanwar (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Dhiraj Gopal (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Indira Bansal (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Nilam Rani (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Janaki Patel (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Kamali Philips (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Manju (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Anang Verma (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Rubi Mittal (verified owner) –
Swapan Mehta (verified owner) –
Om Mehta (verified owner) –
Akshayaguna Pandey (verified owner) –