Ortur YRR 3.0 Rotary Roller
₹8,999.00 (Inc. GST) ₹1,372.73 GST Input (18%) Claimable with B2B Billing. Enter GST number at checkout.
2 in stock
2 in stock
• Ortur YRR 3.0 Rotary Roller for Cylinder Engraving
• Wide Compatibility
• Six Gears of Width
• Lift Bracket
• Easy Adjustment
• Connecting the Machine
Ship Location – Delhi Warehouse
Description
Ortur YRR 3.0 Rotary Roller for Cylinder Engraving
Wide Compatibility
Compatible to all Ortur & Aufero laser engravers and some other brand’s laser engravers
Six Gears of Width
The diameter of the Y-axis could be adjusted in 6 levels From 190mm to 600mm in width
Lift Bracket
Can be Adjusted in Multiple Directions to Meet Daily Engraving Needs
Easy Adjustment
Two steps for adjusting the screw.
Two minutes down for everything
Connecting the Machine
No installation required, easy to use, direct power supply and control through the laser engraver
Product parameters | |
Product size | 190mm*15Omm* 56mm |
Product weight | 1kg |
Product gross weight | 1.12kg |
Product color | Black |
Material | Aluminum+ A3 board+silicone rubber |
Drive mode | Single motor drive |
Rolling stroke | 1mm- 41mm |
Best engraving speed | 3000mm/ min |
Lopa Mehta (verified owner) –
I think this is amazing. Lots of features and customizable from every point of view. The few times I asked for help in support they were competent, fast and above all very patient. Really recommend
Vaydish Chadha (verified owner) –
I think this is amazing. Lots of features and customizable from every point of view. The few times I asked for help in support they were competent, fast and above all very patient. Really recommend
Galav Dubey (verified owner) –
I rarely leave a comment, but this item is beyond worth it! Gotta let you guys know!
Mahavira Apte (verified owner) –
The first time I got the urges to leave a comment, but this is simply a top-notch thing you can find.
Milan Sethi (verified owner) –
I feel like these social media feeds are expensive for what they offer.
Soma Mishra (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Nilesh hudda (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Surinder Chopra (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Nihal Karthick (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
AmbikaGupta (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Ainal Dwivedi (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Basant Tayal (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Jayaprakash Gandhi (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Kalindi Bansal (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Anaisha Grover (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Srinivas (verified owner) –
Neena Mishra (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Bhanu Pratap (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Ramesa bhai (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Inaya Goswami (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Suma Pandey (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Bharat Daggar (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Shahin Mehta (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Ashywyn Verma (verified owner) –
Vikash Kohli (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Santa Dev (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
PramilaBasanti (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Leela Mittal (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Pawan Jha (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Nitesh Sinha (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Akilesh Mishra (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Himmat Pandey (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Lahar Gupta (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Tenzin Goswami (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Indu Banerjee (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Harbans Sharma (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Atul Mishra (verified owner) –
Anu Mishra (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
NajmaAkhtar (verified owner) –
Januja Jaiswal (verified owner) –
Gulshan Pandey (verified owner) –
Satyabhama Singh (verified owner) –
Janesh Bansal (verified owner) –
Geet Mehta (verified owner) –