SCULPFUN S30 Ultra 33W Laser Module Upgrade Kit for S9/ S6 / S6 Pro
₹99,999.00 Incl.GST / ₹84,744.92 Excl.GST
• Upgrade S9 to S30 Ultra-33W
• Enhanced Ultra-33W Laser
• High-speed Air Assist Pump
• Replaceable Protective Lens
• New Upgrade Laser Eye Shield
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Description
Features
Upgrade S9 to S30 Ultra-33W : This SCULPFUN official S9 upgrade kit helps upgrade S9 to the main functions of S30 Ultra-33W. The package includes S30 Ultra-33W laser module, S30 Ultra motherboard, S30 Ultra air pump, air tube, limit switch, S30 Ultra power adapter, cable, screw bag, laser repair kit and other essential items.
Enhanced Ultra-33W Laser : The S9 laser machine upgrade kit adopts a single enhanced 6W diode, which makes its actual laser power and cutting ability higher. Compared with S9 laser engraver(5.5W cuts 3mm balsa wood and 3mm plywood in one pass time), S9 upgrade kit 33W can cut 15mm balsa wood and 10mm plywood in one pass time.
Upgraded 32-bit Air Assist Motherboard : The latest 32-bit motherboard has a stronger computing and greatly improves the overall performance compared with S9(8-bit) main control board, which can realize faster cutting speed and more stable cutting effect. It supports automatic air assist control function, supports Bluetooth wireless connection to control the machine, and is not limited by the distance of the USB cable.
High-speed Air Assist Pump : Significantly improve the cutting penetration and cutting efficiency with faster cutting speed and cleaner cutting surfaces. The high-speed airflow of 13.5m/s with high-pressure air-assist nozzle makes it can cut plywood and MDF panels more than 5 times faster, and cutting surfaces are cleaner and no smoky.
Standard S9 XY-axis Limit Switch : t is perfectly suitable for S9 laser machine and can be installed and used directly. After installing the limit switch, the machine will open the homing and positioning function, which is very suitable for repeated positioning or batch manufacturing work.
Replaceable Protective Lens : S9 machine upgrade kit adopts innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore its cutting power. One free lens is included in the package with purchase, lenses are very cheap and can be easily purchased from SCULPFUN.
New Upgrade Laser Eye Shield : SCULPFUN S9 upgrade kit is equipped with a detachable glass eye shield, which will not be dazzling even if you don’t wear glasses. In addition, you can easily disassemble it if you don’t need it.
Compatibility Design : The S9 upgrade kit has been designed to maintain a certain compatibility, and except for the S9 machine, it can also be upgraded to the SCULPFUN S6/S6 Pro or similar 2-axis laser machines.
Tech Specs
Laser Information:
-
- Diode laser output power : 33W
-
- Laser focus : 0.08×0.10mm
-
- Laser wavelength : 455±5nm
-
- Focusing method : 40mm fixed focus column + sliding device
-
- Laser protection cover : Equipped with a detachable laser protective cover to protect the eyes. You can adjust it up and down, or remove the eye shield.
-
- Laser shell material : 6063 aluminum
Applicable Machines:
-
- SCULPFUN S9/S6/S6Pro
Air Pump:
-
- Type:main board controlled air pump,
voltage 24V, flow rate 30 L/min - Air hose inner diameter : 7.5mm
- Type:main board controlled air pump,
Power Supply:
-
- Power input : 100-240V AC, 50/60HZ
-
- Output : 24V 7A
Motherboard:
-
- 32-bit air assist motherboard, support wireless Bluetooth connection to control machine, not limited by the distance of USB cable
Package:
-
- Package weight : 3.32KG
- Packing size : 390*300*117mm
Cutting/Engravable Materials:
-
- Cutting materials : all kinds of wood (including walnut, cherry wood and other high-density wood), MDF, black acrylic board, cardboard, bamboo chips, leather, some plastic boards, fiberglass board
- Carving materials : all kinds of wood (including walnut, cherry wood and other high-density wood), MDF, bamboo, cardboard, plastic, leather, fiberglass board, aluminum oxide, stainless steel(non-specular surface), ceramics, dark stone.
- Operating Software : LightBurn (with air assist function M8), LaserGRBL, Benbox, Grbl Controller, LiteFire, support Windows system, support MAC system. The supporting file formats are NC, BMP, JPG, PNG, DXF and other picture formats.
Data Transmission Method:
-
- USB connection or Bluetooth wireless connection
NOTE:
Detailed Diagram
Package Include:
- SCULPFUN S30 Ultra 33W Laser Module Upgrade Kit – 1Pc
Additional information
| Weight | 3.32 kg |
|---|---|
| Dimensions | 39 × 30 × 11 cm |
| Brand | |
| Condition | |
| HSN Code | |
| Optical Power | |
| Laser Spot Size(mm) |
51 reviews for SCULPFUN S30 Ultra 33W Laser Module Upgrade Kit for S9/ S6 / S6 Pro
Clear filtersMore Products
3D Printed annoying box container 3 layers of screws 134 screws total
In stock
USBASP ISP AVR Programmer
In stock
Twotrees ER16 Spring Collet Set CNC Chuck – 5.5mm
In stock
Flexible Coupling Clamp – D20L25 – 8*9.5
In stock
Pradeep Banerjee (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Jaya Rai (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Manjunatha Iyer (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Kanan Chadha (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Varsha Jain (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Adhideva Rawat (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Prabhat Mehta (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Krishna Mehta (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Mamata Das (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Sandeep Sahu (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Udai Mallhotra (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Charan Singh (verified owner) –
Chinmay Chaturvedi (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Rajeshvari Venkata (verified owner) –
Sudhir Goel (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Bhumika Bisht (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Shylah Parihar (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Chandrashekhar Sharma (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Sangit Sharma (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Pavan Hegde (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Premvati Sinha (verified owner) –
Kavita Bisht (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Shambhu Sharma (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Varoun Agarwal (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Ramavati Das (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Shaan Goel (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Lila ben (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Vinod Kamble (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Pooja Saxena (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Ramnath Gupta (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Ritesh Kohli (verified owner) –
Manjula ben (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Tarana Mehta (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Mahika Parihar (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Lakshmi devi (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Manda Ghosh (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Taara Pandey (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Praveen Gandhi (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Kanti Kaushik (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Naresh Dwivedi (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Rikita Goel (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Chaitya Chaturvedi (verified owner) –
Gangabai Joshi (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Gautam Ghosh (verified owner) –
Ghalib Pandey (verified owner) –
Kamlesh Pandey (verified owner) –
Gajendra Srivastav (verified owner) –
Nanda Karthick (verified owner) –
Lalam Patel (verified owner) –
Hasina Rawat (verified owner) –