-19%
CC DEBUGGER Programmer for RF Sys-on-Chips
₹869 Incl GST (₹736 +18%GST)
Mist Coolant Lubrication Spray System
₹1,299 Incl GST (₹1,101 +18%GST)
Mitsubishi QY40P PLC Output Unit 12/24 VDC
₹11,000 Incl GST (₹9,322 +18%GST)
- Overload Protection Function
- Overheat Protection Function
- Power Supply (V) : 12-24
- Current Type : DC
- Occupied I/O Points on PLC : 16
- Rated Load Voltage (VDC : 12/24
In stock
In stock
45
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MB01510
Function:
- If an overcurrent due to overload keeps flowing, heat is generated
and the overheat protection function is activated.
• The functions are provided for protecting only the circuits inside
the module.
A load error, which causes an increase in temperature within the
module, may deteriorate output elements or discolour the module
case or printed circuit board. If a load error occurs, turn off the
corresponding output immediately and eliminate the error cause.
Features:
Overload protection function:
- The overload protection function is activated in units of 1 point at 1A to 3A/point.
- The overload protection function returns to normal operation when the load becomes a rated load.
- The overheat protection function automatically returns to normal operation after heat reduces.
Overheat protection Function:
- The overheat protection function is activated in units of 1 point.
Specifications:
| Series | MELSEC-Q SERIES |
|---|---|
| Type | TRANSISTOR OUTPUT (SINK) |
| Power Supply (V) | 12-24 |
| Current Type | DC |
| Occupied I/O Points on PLC | 16 |
| Integrated Digital Outputs | 16 |
| Output Type | TRANSISTOR |
| Output Logic | SINK |
| Rated Load Voltage (VDC) | 12/24 |
| Wiring | SCREW |
Package Include:
- Mitsubishi QY40P PLC Output Unit 12/24 VDC -1Pc
3 reviews for Mitsubishi QY40P PLC Output Unit 12/24 VDC
Clear filtersNew Products
90°Corner Angle Bracket Corner Connection Joint 2020 Series
In stock
₹375 Incl GST (₹318 +18%GST)
Steering Angle Corner L Bracket 2020 Series
In stock
₹65 Incl GST (₹55 +18%GST)
Udai Mallhotra (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Geet Jaiswal (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Eravati Sinde (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!