2/3/4 Core Shielded Xtension Cable 22AWG
2/3/4 Core Shielded X-tension Cable 22AWG 640.00770.00 (Incl. GST)
Back to products
52mm Aluminum Spindle Clamp Motor Bracket with 4pcs Screw Mounting Holder
52mm Aluminum Spindle Clamp Motor Bracket Original price was: ₹1,099.00.Current price is: ₹899.00. (Incl. GST)

Quick Push Type Lock Electric Wire Connectors Terminal

(48 customer reviews)

22.0050.00 (Incl. GST)

  • INDEPENDENT DESIGN – No interference, using insulation flame retardant material and stainless steel circlip structure, avoiding wires fall off, so that the copper conductor of the exposed wire is sealed in the plastic. Avoid arcing, dustproof , moisture-proof.
  • NO TOOLS REQUIRED – Simple operation, saving time and effort. Hold down the item and press the terminal, and then put the peeled wires into the terminal, finally loose hands and finish the connection.
  • MULTIPURPOSE – Widely used in lighting, power and wiring, motor, electrical control, household appliances, machinery and wire joints.
EAN: 8903470428058 SKU: MO-SWCTB Categories: , , Tag:
Earn up to 1 MechBlock point.
Processing time: 1 days
Check Estimated Delivery at
Shipping to IN
Add 999.00 to cart and get free shipping! Free shipping over 999/-
20 People watching this product now!

Mechblock Shopping Event

Hurry and get discounts on all Mechblock Products up to Rs.1000

Coupon code: MECHBLOCK

Product details

  • INDEPENDENT DESIGN. No interference, using insulation flame retardant material and stainless steel circlip structure, avoiding wires falling off, so that the copper conductor of the exposed wire is sealed in the plastic. Avoid arcing, dustproof, and moisture-proof.
  • NO TOOLS ARE REQUIRED. Simple operation, saving time and effort. Hold down the item and press the terminal, and then put the peeled wires into the terminal, finally loose hands and finish the connection.
  • MULTIPURPOSE. Widely used in lighting, power and wiring, motor, electrical control, household appliances, machinery, and wire joints.
  • NOTICE: Please use it in the rated range. Do not connect high-power electrical.

Installation:

  • 1. Press the spring clip.
  •  Insert wires. (The wires stripped of the outer skin are all inserted into the holes. Can’t be exposed).
  • Release the press clip.

Specification:

Model: Terminal Block 2P
  • Insulator Material: PP
  • Contact Material: Manganese Steel
  • Rated Voltage &Current: 250V, 10A
  • Suitable for Wire Diameter: 0.5-2.5 Square Millimeters
  • Screw Hole Diameter: M3
Model: Terminal Block 5P
  • Insulator Material: PA66
  • Contact Material: 301 Stainless Steel
  • Rated Voltage &Current: 250V, 5A
  • Suitable for Wire Diameter: 0.5-2.5 Square Millimeters
  • Screw Hole Diameter: M3

Package includes:

  • Spring Wire Connectors – 1pc
Dimensions N/A
Brand

Condition

HSN Code

4.9
48 reviews
45
3
0
0
0

48 reviews for Quick Push Type Lock Electric Wire Connectors Terminal

Clear filters
  1. Kash Mehta (verified owner)

    Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!

  2. Ramanath Prasad (verified owner)

    Very nice machine. With Lightburn very easy to work with it.

  3. Shefali Ghosh (verified owner)

    Perfect machine, well packaged, great engraving and cutting, worth buying!

  4. SuryaMehta (verified owner)

    Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!

  5. Mishrarna Devi (verified owner)

    I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!

  6. Avanindra Chauhan (verified owner)

    I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.

  7. Biswanath Singh (verified owner)

    Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.

  8. Dhanadaa Apte (verified owner)

    This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!

  9. Ajalaa Rawat (verified owner)

  10. Sabita Kaushik (verified owner)

    Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.

  11. Vijay Rai (verified owner)

    I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!

  12. Dattatreya Singh (verified owner)

    The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.

  13. Raghavendra Sharma (verified owner)

    Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!

  14. Rukmini Desai (verified owner)

    Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!

  15. Neena Mishra (verified owner)

  16. Gajendra Srivastav (verified owner)

    Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.

  17. Amar Dwivedi (verified owner)

    Perfect machine, well packaged, great engraving and cutting, worth buying!

  18. Lala Jha (verified owner)

    Very nice machine. With Lightburn very easy to work with it.

  19. Kamalamma (verified owner)

  20. Balaji Venkata (verified owner)

    I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!

  21. Sachin Kumar (verified owner)

    This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!

  22. Pushpa Rani (verified owner)

    Very nice machine. With Lightburn very easy to work with it.

  23. Acchutan Garg (verified owner)

    I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!

  24. Dayaram Apte (verified owner)

    I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.

  25. Shakila Begum (verified owner)

    Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.

  26. Sabina Khatoon (verified owner)

    The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.

  27. Hansika Banerjee (verified owner)

    The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.

  28. Yashpal Chadha (verified owner)

    Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.

  29. Aakav Rawat (verified owner)

    Perfect machine, well packaged, great engraving and cutting, worth buying!

  30. Rajendra Mishra (verified owner)

  31. Baban Kumar (verified owner)

    I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.

  32. Anil Anand (verified owner)

    I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!

  33. Kavi Parihar (verified owner)

    Very nice machine. With Lightburn very easy to work with it.

  34. Akhila Bisht (verified owner)

    Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!

  35. Sohan rghav (verified owner)

    Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.

  36. Saraaj Anand (verified owner)

    I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!

  37. Siddh Mallhotra (verified owner)

    I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.

  38. Nameen Bansal (verified owner)

    Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.

  39. Banhi Tayal (verified owner)

    Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!

  40. Hemlata Sharma (verified owner)

    Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!

  41. Rupesh Jindal (verified owner)

    This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!

  42. Geeta Anand (verified owner)

    Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!

  43. Arpana Verma (verified owner)

  44. Anbu Verma (verified owner)

  45. Motilal Tripathi (verified owner)

  46. SatyaAnand Swami (verified owner)

  47. Dayaram Shinde (verified owner)

  48. Laksmi Anand (verified owner)

Add a review

Your email address will not be published. Required fields are marked *

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5
1 2 3 4 5

You have to be logged in to be able to add photos to your review.

Welcome to mechBlock.in / Sun Enterprises We are a leading engineering and technology company based in India that specializes in cutting-edge mechanical and robotic solutions. Founded in 2020, our mission is to design and develop innovative systems that can help our clients improve efficiency, reduce costs, and enhance performance. Our team of highly skilled engineers and technicians have extensive experience in the field of mechanical engineering, robotics, and automation. We have the knowledge and expertise to design, develop, and implement complex systems that can meet the unique needs of our clients. We work with a wide range of industries including manufacturing, transportation, construction, and logistics to provide customized solutions that can improve productivity, safety, and performance. Our solutions range from advanced robotic systems to precision-engineered mechanical components, and everything in between. We believe in delivering quality work and providing excellent customer service. We work closely with our clients to understand their requirements and deliver solutions that exceed their expectations. Our portfolio includes a wide range of successful projects, from automated assembly lines to precision robotic systems. Our goal is to be the go-to partner for companies that want to leverage the latest mechanical and robotic technologies in India. We’re always looking for new challenges and opportunities to collaborate with companies that share our vision of a smarter and more efficient future.