The WORLD’S FIRST Diode 20W Laser Output Quad-Laser Engraving and Cutting Machine

Without a doubt, the Atomstack X20 Pro is now the most powerful diode laser engraver. It is equipped with a world’s first quad-core laser module. Four 6W lasers are coupled into a 20W super laser, making the X20 Pro the absolute ruler in the field of engraving and cutting.

Details:

Specification:

Packing list:

1* Atomstack X20 Pro machine

1* Air assist kit

Notes And Precautions:

• Do NOT operate laser without eye protection.
• When the laser engraver is working, the operator should not leave it alone, just in case the materials being carved catch fire
• Please set up laser engraver in the fireproofing area, with good ventilation。
• Please keep minors (especially kids younger than 14 yours old) away from this laser engraver. Minors of any age should not use this laser without direct Adult supervision and proper eye protection。
• Please do not touch the laser beam with your hands or any other objects you do not wish to engrave/burn/cut. Serious physical harm is possible if used improperly。
• Please avoid strongly impact on the machine。
• Use the laser engraver in a room that can be closed by a door and ensure that neither laser beams nor stray light can penetrate through the windows。
• While using the laser engraver, use door signs or a warning light on the door that indicates the laser engraver is in operation。
• Please do not touch the heat sink, when the laser engraver just stops working, it may scald your hands。