USONGSHINE Nema 17 17HS8401S Stepper Motor for CNC 3D printer
₹949.00 Incl.GST / ₹804.24 Excl.GST
• Pitch angle: 1.8°
• Rated current: 1.5A
• Holding torque: 40Ncm
• Step angle accuracy: + – 5% (full step, no load)
• Resistance accuracy: + – 10%
• Inductance accuracy: + – 20%
• Ambient temperature –> 20deg ~+50deg
• Insulation resistance: 100M Min, 500VDC
• Insulation resistance –> 500VAC for one minute
| Weight | 0.36 kg |
|---|---|
| Dimensions | 42 × 42 × 48 cm |
| Brand | |
| Condition | |
| HSN Code | |
| Stepper Motor Current | |
| Stepper Motor Step Angle | |
| Stepper Motor Torque |
26 in stock
Description
USONGSHINE Stepper Motor 48 mm 17HS8401S
1. High torque: The Electric Stepper Motor 17HS8401S has a high holding torque -> 40Ncm
2. Low resistance: This stepper motor can get a lower drag value compared to motors with the same thickness and torque. This significantly increases the thermal conductivity of the motor. Thus, the temperature rise is effectively reduced.
3. Wide application: This small stepper motor can be used in various fields such as 3D printer, stage lighting, laser engraving, textile machinery, medical equipment, placement machine, non-standard equipment, automation equipment, etc.
Specifications:
Model Number : 17HS8401S
Product Type : Motor
Motor Length : 48 mm
Pitch angle : 1.8°
Rated current: 1.5A
Holding torque : 40Ncm
Step angle accuracy : + – 5% (full step, no load)
Resistance accuracy : + – 10%
Inductance accuracy : + – 20%
Ambient temperature –> 20deg ~+50deg
Insulation resistance : 100M Min, 500VDC
Insulation resistance –> 500VAC for one minute
Product weight: 360 g.
Package :
1x USONGSHINE Stepper Motor 17HS8401S with wire
48 reviews for USONGSHINE Nema 17 17HS8401S Stepper Motor for CNC 3D printer
Clear filtersRelated products
DM556 Digital Stepper Motor Driver Controller 2 Phase 5.6A for 42/57/86 Stepper Motor
In stock
Inductive Proximity Sensor – LJ12A3-4-Z/BX NPN DC6-36V 4mm Normally Open Proximity Switch
In stock
Welding-free Plug-in Terminal Block 2EDGRK Pitch – Green
In stock
GX16 Docking Set Connector
In stock
SD16 Waterproof Cable Mount Aviation Connector Male Plug Female Socket IP68
In stock
SD13 Waterproof Panel Mount Aviation Connector Male Plug Female Socket IP68
In stock
TowerPro MG995 Gear Servo Motor
In stock
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
In stock
GRBL Offline Controller LCD Screen For CNC Laser Engraver
In stock
Two Trees 100K NTC Thermistor with XH2.54 Connector 1meter
In stock
NTC100K Thermistor Temperature Sensor for High Temperature Filament 350 Degree Hotend Kit
In stock
AT-09 Bluetooth 4.0 UART Transceiver Module CC2541 Compatible with HM-10
In stock
USONGSHINE 3D Printer Cooling Fan 4010 DC 24V/12V/5V Brushless Cooling Fan with 2Pin Wire Mini Fan for 3d Printer Parts
In stock
Makerbase 3D Touch Sensor Auto Bed Leveling Reprap Mk8 I3 Ender 3d Printer Parts
In stock
100K NTC 3950 Thermistors Thermal Sensors with dupont Cable for 3D Printer
In stock
UNO R3 Development Board Improved ATmega328P Type C Interface
In stock
TTL FTDI Transmitter USB For 3.3V/5V Dual power FT232RL MWC Programmer
In stock
PWM DC 6V 12V 24V 28V 3A DC Motor Speed Controller Board 1203B
In stock
HH52P AC 24V Coil DPDT 8 Pins Electromagnetic Power Relay With DYF08A Base
In stock
SD20 Waterproof Cable Mount Aviation Connector Male Plug Female Socket IP68
In stock
SD13 Waterproof Cable Mount Aviation Connector Male Plug Female Socket IP68
In stock
Rajeev Kripal (verified owner) –
Wished I had found this sooner, it took me a lot of money and time until I found my dream product here!
Sangit Singh (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Balveer Agarwal (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Kumari Selja (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Vimal Hebbar (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Moti Mala (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
BimalaSood (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Dashrath Tripathi (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Kamalaben Gupta (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Sharvil Kapoor (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Naresh (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Naga Koti (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Govind Sharma (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Anuka Chauhan (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Jagadish Basu (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Sunaina Pandey (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Paras Sinha (verified owner) –
Akash Jha (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Ramesh Sahani (verified owner) –
Kalyani Sharma (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Paramjit Sandhu (verified owner) –
Gana Pandey (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Sunit Das (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Raghav Goel (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Vanita Mishra (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Tippoo Patel (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Anusha Narayan (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Akarsh Garg (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Mithilesh Anand (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Sushila Daggar (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Anu Mishra (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
LilavatiKohli (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Devahuti Apte (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Satyendra Bhatt (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Vijendra Kansal (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Kundan Ballan (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Dattatreya Singh (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Priyanka Sharma (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Pavan Hegde (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Sona Parihar (verified owner) –
Ojas Karthick (verified owner) –
Mahant Pandey (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Sujata Iyer (verified owner) –
Siyaram Kashyap (verified owner) –
Santu Sinde (verified owner) –
Ritesh Kohli (verified owner) –
Laksmi Anand (verified owner) –
Anang Verma (verified owner) –