Showing 1–20 of 1989 resultsSorted by popularity
V-Slot Gantry Plate 100mm (T3*88*100mm)
In stock
₹799.00 Incl.GST / ₹677.12 Excl.GST• This plate was designed to be used with the Bulk-Man 3D Actuator.
• The size is wide enough to fit the actuator without any over hang while the standard gantry layout allows for a variety of mounting options – including the Acme Nut Block and Lead Screw.
End Stop Switch – PCB Mounted with Connectors and Wire
In stock
₹99.00 Incl.GST / ₹83.90 Excl.GST• Wire type: 22AWG
• Working voltage: 300V
• Working Current: 2A
• Temperature resistance: 80° C
• Cable length: 70cm
DRV8825 Stepper Motor Driver
In stock
₹230.00 Incl.GST / ₹194.92 Excl.GST• Supply Voltage: 8.2 – 42 VDC.
• Current Capacity: 2.2A max (24V).
• Continuous current per phase: 1.5 A.
• Minimum Logic voltage: 2.5V.
• Maximum Logic Voltage: 5V.
• Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
Smooth Idler Pulley Wheel Kit
In stock
₹120.00 Incl.GST / ₹101.69 Excl.GST• The Smooth Idler Pulley Kit is an easy to assemble idler free wheel that can be used with Timing Belt up to 9mm wide!
Z-Axis Tool Setting Touch Plate Probe
In stock
₹499.00 Incl.GST / ₹422.88 Excl.GST• This Touch Plate is used to find the offset to your work piece on your CNC build.
MF105RS Flanged Ball Bearing 5x10x4mm
In stock
₹70.00 Incl.GST / ₹59.32 Excl.GST• [Size] – MF105-2RS ABEC1 bearing (I.D.=5mm, O.D.=10mm, Thickness=4mm, Flange Dia:11.6mm).
• [Durable] – Chrome Steel (GCr15) races offer high hardness and great wear resistance, thus extend bearings’ service life.
• [Load & Speed] – Dynamic load rating of 366N and static load rating of 135N. The limiting speed is 50000 RPM under grease lubricating.
• [Easy to Maintain] – Shields on Both sides to keep lubricant in. Z1 noise level for most general use.
DM556 Digital Stepper Motor Driver Controller 2 Phase 5.6A for 42/57/86 Stepper Motor
In stock
Original price was: ₹4,990.00.₹2,360.00Current price is: ₹2,360.00. Incl.GST / ₹2,000.00 Excl.GSTDM556 Digital Stepper Motor Driver 20-50VAC 1.0-5.6A 2 Phase Stepper Driver.
• Supply voltage up to +50 VDC
• Output current programmable, from 0.5A to 5.6A via DIP switches
• Pulse input frequency up to 200 kHz
• TTL compatible and optically isolated input
• Automatic idle-current reduction
• Suitable for 2-phase and 4-phase motors
• Support PUL/DIR and CW/CCW modes
• Over-voltage, over-current, phase-error protections
Maker Shield – Arduino Uno Compatible Shield GRBL 1.1 CNC Controller
In stock
Original price was: ₹3,999.00.₹2,999.00Current price is: ₹2,999.00. Incl.GST / ₹2,541.53 Excl.GSTThe Maker Shield is an all in one GRBL 1.1 solution for CNC control designed for use with the Arduino® Uno and Uno compatible controller boards. This shield features 4 embedded DRV8825 stepper motor drivers making configuring and setting up your system an easy plug and play exercise. Use this shield in your laser engravers, CNC routers, plasma cutters or any robotics project that has stepper motors.
6 in 1 Delrin Dual V Wheel Kit
In stock
₹149.00 Incl.GST / ₹126.27 Excl.GST• This Delrin Dual V Wheel Kit is great for use with any V Wheel Linear Guide System.
• They can be used with V-Slot Extrusion or OpenRail.
Xtreme Solid V Wheel Kits – Unassembled Polycarbonate Wheel
In stock
₹120.00 Incl.GST / ₹101.69 Excl.GST• Each Xtreme Solid V Wheel kit is individually packaged in a zip-lock bag. The more you buy the greater the savings.
7 Hole Cross Joining Plate
In stock
₹249.00 Incl.GST / ₹211.02 Excl.GST• This plate creates a junction with up to 4 Linear Rail.It can be positioned to suit your application.
Xtreme Mini V Wheel Assembled
In stock
₹79.00 Incl.GST / ₹66.95 Excl.GST• Many of these wheels could be added to a gantry to allow an even distribution of the load across them.
• The Xtreme Mini V Wheel is great for use with the V-Slot Linear Guide System.
• These wheels are individually milled for consistent high precision and tolerance.
Motor Mount Plate NEMA 17
In stock
₹449.00 Incl.GST / ₹380.51 Excl.GST• The idea behind this plate is to give you a mountable yet movable plate for your Nema 14 & Nema 17 Stepper Motors.
MR105ZZ Sealed Shielded Ball Bearing
In stock
₹40.00 Incl.GST / ₹33.90 Excl.GST• Miniature and instrument ball bearings can be divided into two basic types, deep groove and angular contact.
• The first (deep groove) can also be classified as “Open”, “Shielded”, or “Sealed” depending on the existence and type of seal or shield.
NEMA 23 Stepper Motor Holding Turque 2.45N.m
In stock
₹2,999.00 Incl.GST / ₹2,541.53 Excl.GSTThese NEMA 23 stepper motors is a great choice for any project.
With an all black body, these motors also look fantastic!
• Step Angle：1.8°
• Rated current：3.0A DC
• Rated Voltage: 3.6V
• Winding dc resistance (25℃): 1.2Ω±10%
• Winding inductance: 4mH±20%
• Holding torque：≥2.45N.m
• Shaft diameter: 6.35mm or 1/4″
Xtreme Dual V Wheel Assembled
In stock
₹113.00 Incl.GST / ₹95.76 Excl.GST• These Xtreme V wheels are designed to be used as a heavy duty alternative to the Delrin V Wheels in applications such as CNC Routers/Mills where force and weight are introduced into the system.
Delrin Mini V Wheel Kit Assembled
In stock
₹99.00 Incl.GST / ₹83.90 Excl.GST• The Mini V Wheel Kit includes Parts needed to build and mount the Mini V Wheel to the Mini V Plate to create a small form factor linear actuator guide!
• These Mini V Wheels can be used on a variety of projects and are great for use with any V-Slot Extrusion.
Delrin Solid V Wheel Assembled
In stock
₹91.00 Incl.GST / ₹77.12 Excl.GST• The Delrin Solid V Wheel is a strong wheel that resists deflection due to its solid nature.
2 Hole Joining Strip Plate
In stock
₹150.00 Incl.GST / ₹127.12 Excl.GST• These heavy duty 2 Hole Joining Strip Plates are perfect for any project requiring connection strength.
Internal Insert Module 1.0 Gear Rack
In stock
₹640.00 Incl.GST / ₹542.37 Excl.GST• The Internal Gear Rack is designed to slide inside the channel of our 20 profile V-Slot Linear Rail and works with standard 20 profile T-Slot as well. Simply slide the gear rack into the V-Slot Channel and secure it in place using a T-Nut and Bolt on each end.
