XTOOL
IKIER
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
xTool F1
XTool P2
xTool D1 Pro 40W + 10W Kit
xTool D1 Pro
xTool M1
Air Assist Set
Honeycomb Panel Set
Extension Kit
Motheboard
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
New! SCULPFUN S30 Ultra
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
USONGSHINE 3D Printer Cooling Fan 5010 DC 24V/12V/5V Brushless Cooling Fan with 2Pin Wire Mini Fan for 3d Printer Parts
₹180.00 – ₹220.00 (Incl. GST)
USONGSHINE 3D Printer Cooling Fan 4020 DC 24V/12V/5V Brushless Cooling Fan with 2Pin Wire Mini Fan for 3d Printer Parts
₹190.00 – ₹230.00 (Incl. GST)
USONGSHINE 3D Printer Cooling Fan 4010 DC 24V/12V/5V Brushless Cooling Fan with 2Pin Wire Mini Fan for 3d Printer Parts
₹170.00 – ₹200.00 (Incl. GST)
- Low noise: less than 20 dBA, size: 40 *40 * 10mm, High quality: Allow your machine to cool down normally.
- Wide range of applications: Suitable for hot end cooling, printers or other cooling requirements, such as: B. small communication devices for heat radiation; PC CPU server, cooling capacity, etc.
- Interface type: JST-XHP-2, cable length: approx. 30 cm.
Check Estimated Delivery at
Shipping to IN
17
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
- Low noise: less than 20 dBA, size: 40 *40 * 10mm, High quality: Allow your machine to cool down normally.
- Wide range of applications: Suitable for hot end cooling, printers or other cooling requirements, such as: B. small communication devices for heat radiation; PC CPU server, cooling capacity, etc.
- Interface type: JST-XHP-2, cable length: approx. 30 cm.
Specification:
Type : 4010 ventilator
Size: 40x40x10mm
Spanning:DC 24V
Current rating: 0.1A
Power consumption: 2.4W
Revolution: 7000 10% for RPM
Noise: 27dBA (quiet)
Air volume: 6CFM
Specification:
Type : 4010 ventilator
Size: 40x40x10mm
Spanning:DC 12V
Current rating: 0.07A
Power consumption: 1.2W
Revolution: 5600 10% for RPM
Noise: 18dBA (quiet)
Air volume: 6CFM
Storage: Oil storage
Specification:
Type : 4010 ventilator
Size: 40x40x10mm
Spanning:DC 5V
Current rating: 0.25A
Power consumption: 1.25 W
Revolution: 5000 10% for RPM
Noise: 22dBA (quiet)
Air volume: 5CFM
Storage: Oil storage
Lifespan: 30000 hours
Package Include :
1*Twotrees Cooling Fans 5/12/24 Volt Brushless DC Fans( optional )
| Brand | |
|---|---|
| Condition | |
| HSN Code |
46 reviews for USONGSHINE 3D Printer Cooling Fan 4010 DC 24V/12V/5V Brushless Cooling Fan with 2Pin Wire Mini Fan for 3d Printer Parts
Clear filters
Usongshine is a brand that sells cooling fans and other 3D printer parts and accessories. Their fans are suitable for hot end cooling, printers, and other cooling needs, such as small communication devices for heat radiation and PC CPU servers. Usongshine fans are quiet, with noise levels less than 20 dBA
More Products
Atomstack X70 PRO 360W Laser Engraver F60 Air Assist Kit 500*400MM Engraving Size
In stock
₹218,999.00 (Incl. GST)
SKU:
Atom-X70P
High Temperature Heat Resistant Polyimide Tape
In stock
₹249.00 – ₹349.00 (Incl. GST)
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
TT-HeatTape
M3 SS304 Countersunk head Screws and M3 Nuts A2-70 DIN7991
In stock
₹1,650.00 (Incl. GST)
SKU:
MOHD0045-340
Open Source ZUM Scan Expansion Controller board with a4988 Stepper Motor Driver
In stock
Original price was: ₹469.00.₹339.00Current price is: ₹339.00. (Incl. GST)
SKU:
MB-ECB
Stainless Steel Nozzle Throat with teflon Tube for E3D V6 Hot End 1.75mm Extruder
In stock
₹180.00 (Incl. GST)
SKU:
110101207
Pravin Banerjee (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Shailendra Deepa (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Chandranshu Chaturvedi (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Reena Sharma (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Dayanita Shinde (verified owner) –
Narayanamma Iyer (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Jeladhi Gupta (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Tapas Sahani (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
MantuSharma (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Mithu Bansal (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Shabana Ahmed (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Nisha Katiyar (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Kaanishk Pandey (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Narendra Verma (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Udai Kapoor (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Abhisumat Garg (verified owner) –
Ishaan Chadha (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Ishivara Pandey (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Chandana Mishra (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Gaurav Rana (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Charumati Gupta (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Rikita Goel (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Doshagya Mishra (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Devanand Banerjee (verified owner) –
Nitesh Sinha (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
ChhoteLal (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Sampat Sharma (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Aakesh Garg (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Santos Dedha (verified owner) –
Mamta Pandey (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Avinash hudda (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Amartya Rawat (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Trilochan Kapoor (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Priti Kohli (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Bishvajit Gupta (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Amitabh Parihar (verified owner) –
Dularee Shinde (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Farid Parihar (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Baban Kumar (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Ratna Kaushik (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Chaganti Patel (verified owner) –
Ijay Pandey (verified owner) –
Baldev Singh (verified owner) –
Sarada Dwivedi (verified owner) –
Rama prasad (verified owner) –
Dhirendra Soni (verified owner) –