GX16 Male And Female Connector
Price range: ₹118.00 through ₹234.00
SD20 Waterproof Panel Mount Aviation Connector Male Plug Female Socket IP68
Price range: ₹737.00 through ₹990.00
New
GX12 Male And Female Connector
• The GX12 Air Connectors are a great way to connect limit switches, probes and etc to your custom case.
Price range: ₹121.00 through ₹173.00
Description
The GX12 Air Connectors are a great way to connect limit switches, probes and etc to your custom case. They are easy to use and durable in use.
Feature：
- Type: 2 pin / 3 pin / 4 pin / 5 pin / 6 pin
- Install type: Screw thread tighten
- Screw head diameter: approx. 12mm
- Size: approx. 45*15mm
- Rated voltage: 400V
- Rated current: 5A
- Contact resistance: less than 0.005ohm
- Insulation resistance: more than 1000ohm
- Test voltage: 1500V
- Separating force: 1–3N per pin
- Temperature: rated load, the contact temperature rise should not exceed the ambient temperature + 50 °
- Life: Plug 500 times should not appear harmful plug seats machinery and performance
Environmental conditions:
1. Ambient temperature: -50 ~ + 70 °
2. Relative humidity: 98%(40°)
3. Atmospheric pressure: up 4,4kpa
4. Vibration: vibration frequency 10~100Hz, acceleration up to 100m/s2
5. Impact: frequency 60 to 80 times/min, acceleration up to 250m/s2
6. Centrifugal: acceleration up to 250m/s2
Customer Reviews
50 reviews for GX12 Male And Female Connector
You may also like
-53%
Original price was: ₹4,990.00.₹2,360.00Current price is: ₹2,360.00. Incl.GST / ₹2,000.00 Excl.GST
₹427.00 Incl.GST / ₹361.86 Excl.GST
Price range: ₹699.00 through ₹899.00
Malla amma (verified owner) –
I received a personalized and attentive treatment. Thanks to this deal, I was able to find a solution to my problem in a short time. 🙂
Chandrakant Tiwari (verified owner) –
Thank you guys for this amazing creation! Absolutely mind-blowing!
Ghulam Khan (verified owner) –
Great item! It provides too many things compared to its price charged.
Bikash Koushal (verified owner) –
Been using it for a while, I usually don’t write a review but this time I am truly convinced to write.
mechblock –
We appreciate you taking the time to share your satisfaction and highest rating with us.
Babu Kant (verified owner) –
The item and the design are very cool. Also the support is amazing, they always help you with any detail that you have.
mechblock –
Thank you so much for taking the time to leave us a 5-star rating – it’s much appreciated!
Anuj kumar (verified owner) –
I rarely leave a comment, but this item is beyond worth it! Gotta let you guys know!
mechblock –
We appreciate you taking the time to share your satisfaction and highest rating with us.
Jenika Banerjee (verified owner) –
Hope to see your improvement over time
Susil kumar (verified owner) –
I received a personalized and attentive treatment. Thanks to this deal, I was able to find a solution to my problem in a short time. 🙂
Bhamini Tayal (verified owner) –
Wished I had found this sooner, it took me a lot of money and time until I found my dream product here!
Kimaya Gupta (verified owner) –
I received a personalized and attentive treatment. Thanks to this deal, I was able to find a solution to my problem in a short time. 🙂
Vinod (verified owner) –
The first time I got the urges to leave a comment, but this is simply a top-notch thing you can find.
Nalin Narayan (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Dharv Jha (verified owner) –
I like this item and also the customer service of them.
Bhavika Saxena (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Aatmadeva Rawat (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Anitha Joshi (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Anjali Mani (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Sahil Parihar (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Shrut Kapoor (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Chandravti Ghosh (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Shanti Mishra (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
PramilaBasanti (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Lalika Gupta (verified owner) –
Aarna Jaiswal (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Birendra Ghosh (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Laksmamma Sharma (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Gita ben (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Avinash hudda (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Maina Sharma (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Shakeela Mishra (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Vishwanath Kumar (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Param Karthick (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Muni Devi (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Bala Subramaniam (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Abhiraja Bisht (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Abhijit kochar (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Johar Mishra (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Manoranjan Pandey (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Amaram Rawat (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Sharvil Mallhotra (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Bhanu Pratap (verified owner) –
Narendra Verma (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Mana Bansal (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Sushil Nadar (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Shefali Ghosh (verified owner) –
Venkata Zacharia (verified owner) –
Jaya Rai (verified owner) –
Chetan Sinha (verified owner) –
Damodar Apte (verified owner) –
Anil Anand (verified owner) –