Showing 1–20 of 103 resultsSorted by popularity
The MechBlock.in offers electronics necessary to build machines with Openbuilds products at a good price.We have all the parts you need to complete your CNC Router/Mill, actuator or other builds such as –
- cables for connecting motors with electronics,
- microswitches, used for example for determining the tool position,
- stepper motors for driving transmission bolts or belts,
You can buy all the necessary electronics products for machine building from Openbuilds brand solutions from us at extremely attractive prices.
End Stop Switch – PCB Mounted with Connectors and Wire
In stock
₹99.00 Incl.GST / ₹83.90 Excl.GST• Wire type: 22AWG
• Working voltage: 300V
• Working Current: 2A
• Temperature resistance: 80° C
• Cable length: 70cm
DRV8825 Stepper Motor Driver
In stock
₹230.00 Incl.GST / ₹194.92 Excl.GST• Supply Voltage: 8.2 – 42 VDC.
• Current Capacity: 2.2A max (24V).
• Continuous current per phase: 1.5 A.
• Minimum Logic voltage: 2.5V.
• Maximum Logic Voltage: 5V.
• Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
Z-Axis Tool Setting Touch Plate Probe
In stock
₹499.00 Incl.GST / ₹422.88 Excl.GST• This Touch Plate is used to find the offset to your work piece on your CNC build.
DM556 Digital Stepper Motor Driver Controller 2 Phase 5.6A for 42/57/86 Stepper Motor
In stock
Original price was: ₹4,990.00.₹2,360.00Current price is: ₹2,360.00. Incl.GST / ₹2,000.00 Excl.GSTDM556 Digital Stepper Motor Driver 20-50VAC 1.0-5.6A 2 Phase Stepper Driver.
• Supply voltage up to +50 VDC
• Output current programmable, from 0.5A to 5.6A via DIP switches
• Pulse input frequency up to 200 kHz
• TTL compatible and optically isolated input
• Automatic idle-current reduction
• Suitable for 2-phase and 4-phase motors
• Support PUL/DIR and CW/CCW modes
• Over-voltage, over-current, phase-error protections
Maker Shield – Arduino Uno Compatible Shield GRBL 1.1 CNC Controller
In stock
Original price was: ₹3,999.00.₹2,999.00Current price is: ₹2,999.00. Incl.GST / ₹2,541.53 Excl.GSTThe Maker Shield is an all in one GRBL 1.1 solution for CNC control designed for use with the Arduino® Uno and Uno compatible controller boards. This shield features 4 embedded DRV8825 stepper motor drivers making configuring and setting up your system an easy plug and play exercise. Use this shield in your laser engravers, CNC routers, plasma cutters or any robotics project that has stepper motors.
NEMA 23 Stepper Motor Holding Turque 2.45N.m
In stock
₹2,999.00 Incl.GST / ₹2,541.53 Excl.GSTThese NEMA 23 stepper motors is a great choice for any project.
With an all black body, these motors also look fantastic!
• Step Angle：1.8°
• Rated current：3.0A DC
• Rated Voltage: 3.6V
• Winding dc resistance (25℃): 1.2Ω±10%
• Winding inductance: 4mH±20%
• Holding torque：≥2.45N.m
• Shaft diameter: 6.35mm or 1/4″
Cable Drag Chain Interior Opening
In stock
₹975.00• This Cable Drag Chain or Wire Carrier works great to keep all your cable neatly out of the way.
• These Cable Drag Chains are great because the individual links open.
4 Core Shielded Xtension Cable 22AWG 2.5 meters
In stock
₹825.00 Incl.GST / ₹699.15 Excl.GST• This Stepper Cable is a terminated at one end with a JST-SM 4 Pin Female connector (standard for our NEMA23 Stepper Motors and our High Torque NEMA23 Stepper Motors) and the other end stripped and tinned for easy termination.
Inductive Proximity Sensor – LJ12A3-4-Z/BX NPN DC6-36V 4mm Normally Open Proximity Switch
In stock
₹427.00 Incl.GST / ₹361.86 Excl.GST• Red LED checks the state of the proximity sensor
• High repeated positioning accuracy
• High switching frequency
• Wide voltage range
• Outer (Thread) Diameter: M12
• Antivibration, dust, water, and oil prevention
• Reverse power protection, short circuit protection, directly connecting with PLC
• Can replace small switches and limit switches
Limit Switch for CNC/3D Printers
In stock
₹70.00 Incl.GST / ₹59.32 Excl.GST• Micro limit switches are a simple but effective solution to providing a datum for your machine and keep it within its intended operating range.
• This microswitch can be used as a limit switch for CNCs and 3d Printers especially Delta type machines.
MACH 3 Breakout Board CNC USB MACH3 100Khz 4 Axis Interface Driver Motion Controller +USB Cable+CD
In stock
Original price was: ₹1,899.00.₹1,599.00Current price is: ₹1,599.00. Incl.GST / ₹1,355.08 Excl.GST• This type of the CNC USB MACH3 Controller Card is of strong anti-interference ability, the frequency converter interface is isolated from the computer and the main control circuit.
• The interference signal will not be introduced because of the introduction of the external strong current equipment.Support for 4-axis linkage, you can connect four stepper motor drives or servo drives
• Support automatic probe tool, Emergency input, limit switch, connecting electronic handwheel.
• Need to use an external 24V DC power supply to isolate the USB and external ports, and to make the system more stable.
• 4 general-purpose isolated relay drive output can drive four relays for controlling the spindle starts, forward and reverse rotating pumps, and other devices.
• Compatible with windows 7/8/10.
16 in 1 Sensor kit Compatible with Raspberry Pi 3 & Raspberry Pi 2 Model B
In stock
Original price was: ₹1,699.00.₹1,490.00Current price is: ₹1,490.00. Incl.GST / ₹1,262.71 Excl.GST
Panel Mount Emergency STOP Button N/C Switch
In stock
₹364.00 Incl.GST / ₹308.47 Excl.GST• Installation Dimension: Φ22
• Rated Voltage and Current: 440V, 10A
• Button Internal contact: Silver/Copper
• Mechanical life: ≥2000000 times
• Electrical life: ≥500000 times
• Contact Resistance: ≤50mΩ
• Insulation resistance: ≥10mΩ
Arduino(Compatible) UNO R3 with usb cable
In stock
₹1,485.00 Incl.GST / ₹1,258.47 Excl.GST• Microcontroller : ATmega328 SMD.
• Operating Voltage : 5V.
• Supply Voltage recommended : 7-12V DC.
• Digital I/O Pins : 14 (of which 6 provide PWM output).
• Analog Input Pins : 6.
• DC Current per I/O Pin : 40 mA.
• DC Current for 3.3V Pin : 50 mA.
• Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader.
• SRAM : 2 KB (ATmega328).
GRBL Based CNC Controller Bundle without UNO R3 CNC Shield Power Supply 24V 350W
In stock
₹8,069.00 Incl.GST / ₹6,838.14 Excl.GST• The DCcduino Uno is a micro-controller board based on the ATmega328 and compatible with the Arduino Uno R3.
Emergency STOP Button N/C Switch
In stock
₹679.00 Incl.GST / ₹575.42 Excl.GST• New Upgrade E-Stop Switch with DC Power Cable for V-slot C-Beam OX CNC Work bee CNC Engraving Machine
• Essential to all builds is a big red STOP switch. Easy to see and hit in an emergency.
• When pushed it will latch in the down position and must be rotated to be released.
• This helps prevent accidental re-activation.
Through-wall Plug-in Terminal Block 2EDGWC / 15EDGWC
In stock
Price range: ₹140.00 through ₹295.00• These Through-Wall Connector Terminal Blocks are a simple and efficient method of terminating your electrical connections.
IR Remote Control Extension Cord Cable
In stock
₹449.00 Incl.GST / ₹380.51 Excl.GST• Power: 5V ( Home appliance USB or 5V power supply )
• Carrier frequency: 38KHZ
• Peak wavelength: 940NM
• Receiving distance: 18-20M
• Launch distance: 18-20M
• Cable length from USB to receiver: approx. 1.4 M
Welding-free Plug-in Terminal Block 2EDGRK Pitch – Green
In stock
Price range: ₹46.00 through ₹269.00• These Plug-in Connector Terminal Blocks are a simple and efficient and method of terminating your electrical connections.
• These Connector Blocks comes in a pair of Male and Female connectors.
• We provide two kinds of 3.81mm and 5.08mm of the distance between the centre of each terminal.
Compression Strong Spring for 3D Printer Bed Levelling
In stock
Original price was: ₹25.00.₹19.00Current price is: ₹19.00. Incl.GST / ₹16.10 Excl.GST• Wire Diameter: 1.2mm
• Outer Diameter: 7.5mm
• Inner Diameter: 5mm
• Free Length: 20mm
• Total Coils: 8
