USB ISP Programmer Version 2.0
Original price was: ₹250.00.₹179.00Current price is: ₹179.00. Incl.GST / ₹151.69 Excl.GST
• This downloader supports 3.3V and 5V STC full range of all SCM burning procedures.
• The highest baud rate 115200 perfect support! No longer for the STC10 sense, STC12 series, STC11 series, STC15 series of burning distress.
• The programmer automatically downloads without cold start, no need to frequently power down SCM. This function makes the STC SCM download program becomes very convenient.
• The burner with USB to TTL, USB to serial port function, can be used for USB to TTL electronic product upgrades, does not affect the normal serial communication debugging!
• With 500MA self-recovery fuse, perfect to protect your computer motherboard!
| Weight | 0.1 kg |
|---|---|
| Brand | |
| Condition | |
| HSN Code |
2 in stock
Description
USB ISP PROGRAMMER VERSION 2.0
This programiner is based on Thomas Frisch’s usb asp design and connects to your computer’s USB port. Not only is it quite compact, but the design is really elegant. The USB Interface is achieved by using an atmega processor and the rest is done in firmware With 500ms over-current protection self-recovery fuse, and complete protection of expensive computer motherboard.
Designed to notebook computers, special two 3.6v regulator, a perfect match to level, get rid of the instability of hardware hidden target board power mode jumper settings. The well-configured firmware, the speed of the unique adaptive technology, stability and obtain the best balance between speed supports firmware upgrade unlimited.
Device Supporting:
ATmega8 ATmega48 ATmega88 ATmega168 ATmega328 ATmega103 ATmega128 ATmega1280 ATmega1281 ATmega16 ATmega161 ATmega162 ATmega163 ATmega164 ATmega160 ATmega2560 ATmega2661 ATmega32 ATmega324 ATmega329 ATmega3290 ATmega64 ATmega640 ATmega644 ATmega649 ATmega6490 ATmega8515 ATmega8535 Tiny Series ATtiny12 ATtiny13 ATtiny15 ATtiny25 ATtiny26 ATtiny85 ATtiny85 ATtiny2313 Classic Series ATDOS 1200 AT0052313 AT90S2333 AT90S2343 AT9054414 AT90S4433 AT9054434 AT90S85 15 AT9058535 CAN Series ATBOCAN128 PWM Series ATSOPWM2 AT90PWM3.
Features:
- This downloader supports 3.3V and 5V STC full range of all SCM burning procedures.
- The highest baud rate 115200 perfect support! No longer for the STC10 sense, STC12 series, STC11 series, STC15 series of burning distress.
- The programmer automatically downloads without cold start, no need to frequently power down SCM. This function makes the STC SCM download program becomes very convenient.
- The burner with USB to TTL, USB to serial port function, can be used for USB to TTL electronic product upgrades, does not affect the normal serial communication debugging!
- With 500MA self-recovery fuse, perfect to protect your computer motherboard!
Package Include:
- USB ISP Programmer Version 2.0 – 1PC
49 reviews for USB ISP Programmer Version 2.0
Clear filtersRelated products
16 in 1 Sensor kit Compatible with Raspberry Pi 3 & Raspberry Pi 2 Model B
In stock
Pure Carbon Fiber Magnetic Propeller Balancer Prop Essential For Quadcopter FPV Helicopter Airplane
In stock
Universal Comgrow Laser Lightburn Camera Aluminum arm for calibration/zoom
In stock
Cooler Boss CAH-209-03 Cooling Fan for CPU
In stock
Compression Strong Spring for 3D Printer Bed Levelling
In stock
Radial Ball Bearing for 3D Printer
In stock
2 Position 2.54mm Female Jumper / Shunt Socket Pack of 10pcs
In stock
SOIC8 SOP8 Flash Chip IC Test Clip IC Programming
In stock
TowerPro MG995 Gear Servo Motor
In stock
Soic8 Sop8 to Dip8 Ez Programmer Adapter Socket Converter Module 150mil
In stock
Heart Rate Monitor Kit with AD8232 ECG sensor module
In stock
USBASP ISP AVR Programmer
In stock
Heatbed Adjustment M3 Screw with Spring
In stock
Super Capacitor 2.7V 100F Capacitor Farad
In stock
Expansion Board For Nextion Enhanced Display I/O Extended
In stock
PICKIT 2 PICKIT 3 Programming Adapter PICKIT2 PICKIT3 Universal Programmer Seat
In stock
B10 – 0.6-6mm Motor Drill Chuck With Key and 5mm Shaft Connecting Rod
In stock
USB Logic Analyze 24M 8CH, MCU ARM FPGA DSP Debug Tool
In stock
4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable
In stock
Uno R3 with ATmega328P with A6-A7 pins MicroUSB CH340G
In stock
LED Digital Display DC Energy Meter
In stock
250W Constant Current Boost Step-up Module Mobile Power Supply LED Driver
In stock
3S 100A LiFePO4 Battery Balance Charging BMS Protection PCB Board-White
In stock
SOP16 to DIP8 EZ Programmer Adapter Socket Converter Module 150mil
In stock
HB100 Microwave Doppler Radar Wireless Motion Sensor
In stock
Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 8mb Memory USB-TTL CH340G Compatible for Arduino UNO
In stock
Mini HDMI To VGA Female With Audio Cable
In stock
D1 ESP8266 Wifi Development Board
In stock
Flash Chip IC Test Clips Socket Adapter Programmer
In stock
8 Channel High Level Solid State Relay Module 250VAC 2A
In stock
HL-340 USB 2.0 to RS232 Serial port COM DB9 9 Pin Adapter Cable
In stock
Reconnect Over Voltage VPD1 Protective Device Relay Voltage Monitor
In stock
Pandurang Iyer (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Akshayaguna Garg (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Sarada Dwivedi (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
ShyamaMukherji (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Devendra Anand (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Tanay Mishra (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Shashi Patel (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Muni Devi (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Dynaneshvar Desai (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Chandrakant Tiwari (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Adamya Rawat (verified owner) –
Rubi Mittal (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Vandana Chawla (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Citra Jain (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Ajia Rawat (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Santa Dev (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Anganaa Verma (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Monisha Ganguly (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Shabnam Begum (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Kalpana (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Kash Jaiswal (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Galav Dubey (verified owner) –
Sharvil Kapoor (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Mukesh Rana (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Jayashri Sharma (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Kiaan Dwivedi (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Rachanna Gupta (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Bhuma Rawat (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Deccan Apte (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Harsha Dubey (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Nilima Jain (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Ekanjeet Mishra (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Ranjita Dwivedi (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Bhoja Rawat (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Dipili Shinde (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
GaurammaIyer (verified owner) –
Ruchika Parihar (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Rabiya Ansari (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Satish Ganguly (verified owner) –
Chinta Das (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Balwinder Rana (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Udayan Patel (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Sushma Balakrishna (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
KalavatiKapadia (verified owner) –
Srinivas (verified owner) –
Sayujya Kapoor (verified owner) –
Amruta Patel (verified owner) –
Dhananjay Singh (verified owner) –
Arivoli Verma (verified owner) –