XTOOL
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
D Series
xTool SafetyProโข AP2 Air Purifier
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
SCULPFUN SF-A9
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Showing 21–40 of 762 resultsSorted by popularity
Eccentric Spacers-Carbon Steel
In stock
₹45.00 – ₹55.00โข Carbon Steel Eccentric Spacers are available in various lengths and individually, for your convenience.
โข These Carbon Steel Eccentric Spacers are the perfect solution for creating a pre-load from the V-Wheels to the V-Slot Linear Rail.โข
Eccentric Spacers – Stainless steel
In stock
₹45.00 – ₹60.00โข Stainless steel Eccentric Spacers are available in various lengths and individually, for your convenience.
โข These Stainless steel Eccentric Spacers are the perfect solution for creating a pre-load from the V-Wheels to the V-Slot Linear Rail.
DM556 Digital Stepper Motor Driver Controller 2 Phase 5.6A for 42/57/86 Stepper Motor
In stock
Original price was: ₹4,990.00.₹2,390.00Current price is: ₹2,390.00. Incl.GST / ₹2,025.42 Excl.GSTDM556 Digital Stepper Motor Driver 20-50VAC 1.0-5.6A 2 Phase Stepper Driver.
โข Supply voltage up to +50 VDC
โข Output current programmable, from 0.5A to 5.6A via DIP switches
โข Pulse input frequency up to 200 kHz
โข TTL compatible and optically isolated input
โข Automatic idle-current reduction
โข Suitable for 2-phase and 4-phase motors
โข Support PUL/DIR and CW/CCW modes
โข Over-voltage, over-current, phase-error protections
Maker Shield โ Arduino Uno Compatible Shield GRBL 1.1 CNC Controller
In stock
₹3,999.00 Incl.GST / ₹3,388.98 Excl.GSTThe Maker Shield is an all in one GRBL 1.1 solution for CNC control designed for use with the Arduinoยฎ Uno and Uno compatibleย controller boards. This shield features 4 embedded DRV8825 stepper motor drivers making configuring and setting up your system an easy plug and play exercise. Use this shield in your laser engravers, CNC routers, plasma cutters or any robotics project that has stepper motors.
6 in 1 Delrin Dual V Wheel Kit
In stock
₹149.00 Incl.GST / ₹126.27 Excl.GSTโข This Delrin Dual V Wheel Kit is great for use with any V Wheel Linear Guide System.
โข They can be used with V-Slot Extrusion or OpenRail.
Xtreme Solid V Wheel Kits – Unassembled Polycarbonate Wheel
In stock
₹120.00 Incl.GST / ₹101.69 Excl.GSTโข Each Xtreme Solid V Wheel kit is individually packaged in a zip-lock bag. The more you buy the greater the savings.
7 Hole Cross Joining Plate
In stock
₹249.00 Incl.GST / ₹211.02 Excl.GSTโข This plate creates a junction with up to 4 Linear Rail.It can be positionedย to suit your application.
C-Beam End Mount Plate
In stock
₹699.00 Incl.GST / ₹592.37 Excl.GSTโข These C-Beam End Mount Plates are high quality aluminium plates with multiple taps and recessing to ensure easy assembly.
Xtreme Mini V Wheel Assembled
In stock
₹79.00 Incl.GST / ₹66.95 Excl.GSTโข Many of these wheels could be added to a gantry to allow an even distribution of the load across them.
โข Theย Xtreme Mini V Wheel is great for use with theย V-Slot Linear Guide System.
โข These wheels are individually milled for consistent high precision and tolerance.
GT2 Dual Bearing Idler Timing Pulley – Belt Width – 6mm
In stock
₹119.00โข This pulley works with 6mm width GT2 (2mm) pitch Timing Belt. It works perfectly with the GT2 pulley-belt sets.
โข Use this with our 20 Teeth GT2 Timing Pulley.
Self-aligning Flange Bearing with Pillow Block
In stock
₹165.00 – ₹383.00โข This Bearing is a self-aligning, pillow block bearing, you can adjust or replace the bearing easily.
โข The bearing has a wide inner ring with two set screws for attaching to the shaft.
Motor Mount Plate NEMA 17
In stock
₹449.00 Incl.GST / ₹380.51 Excl.GSTโข The idea behind this plate is to give you a mountable yet movable plate for yourย Nema 14 & Nema 17 Stepper Motors.
M5 Jam Thin Hex Nut
In stock
₹6.00 Incl.GST / ₹5.08 Excl.GSTโข These M5 Jam Nuts are great for when you need a nut with a thinner (2.9mm) profile or use 2 as lock nuts.
MR105ZZ Sealed Shielded Ball Bearing
In stock
₹40.00 Incl.GST / ₹33.90 Excl.GSTโข Miniature and instrument ball bearings can be divided into two basic types, deep groove and angular contact.
โข The first (deep groove) can also be classified as โOpenโ, โShieldedโ, or โSealedโ depending on the existence and type of seal or shield.
Anti-Backlash Nut Block For 8mm/4mm/2mm Lead Screw
In stock
Original price was: ₹475.00.₹299.00Current price is: ₹299.00.โข Theย Anti-Backlash Nut Blockย is a great choice for many projects requiring lead screw linear motion.
โข The pitch and diameter are a perfect combination of high torque and speed
GT2 20 Teeth Timing Belt Pulley-Belt Width 6mm/9mm/10mm/15mm
Out of stock
₹91.00 – ₹306.00โข This specially designed GT2 20 Teeth Timing Belt Pulley isย perfect for your V-Slot automation projects
โข Two Inner Diameter (ID) Bores are available:ย 4mmย /ย 5mmย /ย 6mmย /ย 6.35mmย (1/4โณ) / 8mm
C-Beam Gantry Bundle
In stock
₹1,604.00 – ₹1,745.00โข This Bundle is a great way to get all the parts for a C-Beam Gantry.
โข This Bundle allows a C-Beam Gantry Plate to run along the C-Beam Linear Rail system, with the wheels and nut block on the inside.
Plastic Hinge for V-Slot 2020/3030/4040/4545
In stock
₹70.00 – ₹164.00โข Plastic Hinge for V-Slot and other 2020/3030/4040/4545 Aluminium Extrusions.
โข Grab some Low Profile 8mm Screws and Drop-in Tee Nuts to mount the hinge.
NEMA 23 Stepper Motor Holding Turque 2.45N.m
In stock
₹2,999.00 Incl.GST / ₹2,541.53 Excl.GSTThese NEMA 23 stepper motors is a great choice for any project.
With an all black body, these motors also look fantastic!
โข Step Angle๏ผ1.8ยฐ
โข Rated current๏ผ3.0A DC
โข Rated Voltage: 3.6V
โข Winding dc resistance (25โ): 1.2ฮฉยฑ10%
โข Winding inductance: 4mHยฑ20%
โข Holdingย torque๏ผโฅ2.45N.m
โข Shaft diameter: 6.35mm or 1/4โณ
Xtreme Dual V Wheel Assembled
In stock
₹113.00 Incl.GST / ₹95.76 Excl.GSTโข These Xtreme V wheels are designed to be used as a heavy duty alternative to the Delrin V Wheels in applications such as CNC Routers/Mills where force and weight are introduced into the system.
