XTOOL
IKIER
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
D Series
Air Assist Set
Honeycomb Panel Set
Extension Kit
Motheboard
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
SCULPFUN SF-A9
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
2 x 2 Matrix 4 Push Button Keyboard Module
₹45.00 (Incl. GST)
Replacement Atomstack M100 20W Laser Module For X20 Pro S20 Pro
₹59,999.00 (Incl. GST)
AT-09 Bluetooth 4.0 UART Transceiver Module CC2541 Compatible with HM-10
₹280.00 (Incl. GST)
- Ultra-low standby power consumption 90uA~400uA
- Range up to 60 meters
- Built-in PCB antenna
- Power input : 3.6v to 6v DC (6v MAX)
In stock
In stock
11
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
The AT-09 is a module that contains a BLE chip (a CC2540/CC2541). This module allows performing serial communication with the BLE chip thanks to an Rx and a Tx pin. This module is also very similar to the HM-10 module and is also compatible with it. So if you have some experience with the latter, you will get started quickly with the AT-09.
This small size Bluetooth 4.0 TTL transceiver module allows your target device to communicate with your iPhone/iPad, IOS 6 or Android 4.3 above devices. You can set it as a slave or master and use AT command to set the baud rate.
Applications:
- Industrial remote control, remote sensing.
- POS system, Bluetooth keyboard, mouse, game controllers.
- Automobile testing equipment.
- Portable, the battery power of medical equipment.
- Automated data collection.
- Bluetooth remote control toy.
- The wireless LED display system.
- Bluetooth printer.
- Intelligent household, industrial control.
55 reviews for AT-09 Bluetooth 4.0 UART Transceiver Module CC2541 Compatible with HM-10
Clear filtersMore Products
4 Series 30A 18650 Lithium Battery Protection Board 14.8V 16V with Cable
In stock
Original price was: ₹250.00.₹199.00Current price is: ₹199.00. (Incl. GST)
SKU:
MB-LBPC
GT2 Idler Pulley 16 Toothless Timing Pulley Aluminum Wheel for 3D Printer
In stock
₹225.00 (Incl. GST)
SKU:
GT216T- B3-W6
SUNLU PLA Glow in The Dark Red 3D Printer Filament 1.75mm
In stock
₹2,799.00 (Incl. GST)
SKU:
PLAGlowRed
TwoTrees Aluminum Laser Cutting Honeycomb Workbench Table Bed 500X500mm
In stock
₹7,999.00 (Incl. GST)
SKU:
TT-200106062
TWOTREES A4988 Stepper Motor Driver Module with Heat Sink
In stock
₹99.00 (Incl. GST)
SKU:
120901005
Ishaan Chadha (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Farookh Patel (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Palana Saini (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
MarutiBhatt (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Gulshan Chopra (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Yanisha Goel (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Rama prasad (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Advaith Garg (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Shalee Banerjee (verified owner) –
Ramji Dwivedi (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Kamlesh Dubey (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Doshagya Jha (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Ramesh Singh (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Siva Kashyap (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Lata Goel (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Murukan Rao (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Aatmik Bisht (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Subash Singh (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Laksmamma Singh (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Anila Antony (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Campaben Desai (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Chaitanya Rawat (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Anjuli Anand (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Ruma Joshi (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Shabnam Begum (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Ghanashyam Tiwari (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Ramesh Sahani (verified owner) –
Jayaram Sharma (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Ijay Pandey (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Rekha Pandey (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Shambhu Singh (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Rajeshvari Venkata (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Basappa Grover (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Dharma Anand (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Jakir Khan (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Laksh Dwivedi (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Arvindaa Chauhan (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Sujal Kapoor (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Shanta Banerjee (verified owner) –
Asoka Mehta (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Nikhel Bansal (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Dhir Jha (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Pravin Banerjee (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Vandana Chawla (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Shaarad Mallhotra (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
ManishBansal (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Balu Singh (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Syed Afroz (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Ranjana Banerjee (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Nagaraja Mehta (verified owner) –