XTOOL
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
Apparel Printer
MetalFab
xTool SafetyPro™ AP2 Air Purifier
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
iCube Series
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Showing all 8 resultsSorted by popularity
Stepper drivers convert pulse signals from the controller into motor motion to achieve precise positioning.A Stepper Motor Driver is the driver circuit that enables the stepper motor to function the way it does.
DRV8825 Stepper Motor Driver
In stock
₹230.00 Incl.GST / ₹194.92 Excl.GST• Supply Voltage: 8.2 – 42 VDC.
• Current Capacity: 2.2A max (24V).
• Continuous current per phase: 1.5 A.
• Minimum Logic voltage: 2.5V.
• Maximum Logic Voltage: 5V.
• Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
DM556 Digital Stepper Motor Driver Controller 2 Phase 5.6A for 42/57/86 Stepper Motor
In stock
Original price was: ₹4,990.00.₹2,390.00Current price is: ₹2,390.00. Incl.GST / ₹2,025.42 Excl.GSTDM556 Digital Stepper Motor Driver 20-50VAC 1.0-5.6A 2 Phase Stepper Driver.
• Supply voltage up to +50 VDC
• Output current programmable, from 0.5A to 5.6A via DIP switches
• Pulse input frequency up to 200 kHz
• TTL compatible and optically isolated input
• Automatic idle-current reduction
• Suitable for 2-phase and 4-phase motors
• Support PUL/DIR and CW/CCW modes
• Over-voltage, over-current, phase-error protections
Maker Shield – Arduino Uno Compatible Shield GRBL 1.1 CNC Controller
In stock
Original price was: ₹3,999.00.₹2,999.00Current price is: ₹2,999.00. Incl.GST / ₹2,541.53 Excl.GSTThe Maker Shield is an all in one GRBL 1.1 solution for CNC control designed for use with the Arduino® Uno and Uno compatible controller boards. This shield features 4 embedded DRV8825 stepper motor drivers making configuring and setting up your system an easy plug and play exercise. Use this shield in your laser engravers, CNC routers, plasma cutters or any robotics project that has stepper motors.
MACH 3 Breakout Board CNC USB MACH3 100Khz 4 Axis Interface Driver Motion Controller +USB Cable+CD
In stock
₹1,899.00 Incl.GST / ₹1,609.32 Excl.GST• This type of the CNC USB MACH3 Controller Card is of strong anti-interference ability, the frequency converter interface is isolated from the computer and the main control circuit.
• The interference signal will not be introduced because of the introduction of the external strong current equipment.Support for 4-axis linkage, you can connect four stepper motor drives or servo drives
• Support automatic probe tool, Emergency input, limit switch, connecting electronic handwheel.
• Need to use an external 24V DC power supply to isolate the USB and external ports, and to make the system more stable.
• 4 general-purpose isolated relay drive output can drive four relays for controlling the spindle starts, forward and reverse rotating pumps, and other devices.
• Compatible with windows 7/8/10.
Two Trees TMC2209 V2.0 Stepper Motor Driver Module
In stock
₹700.00 Incl.GST / ₹593.22 Excl.GSTVersion: TMC2209 V2.0
Input Voltage range: 5.5V-28V
Maximum current: 2.5A
Logic Voltage: 3.3V-5V
MicroStep: upto 1/256
3D printing wireless router ESP8266 WIFI module MKS Robin-WIFI V1.0 APP remote control for MKS Robin mainboard high stability
In stock
₹890.00 Incl.GST / ₹754.24 Excl.GSTAuto search hotspot after power-on, connect hotspot directly by the screen.
RepetierHost/pronterface remote control instead of USB.
PC or mobile phone’s browser remote control and transfer files.
Compatible 3D Printer: MKS Robin
Operating Voltage: 3.3V
Size: 25 * 23mm
Language: EN / CN (auto-ID)
Twotrees TL-Smoother Plus module For 3D printer motor drivers
In stock
₹250.00 Incl.GST / ₹211.86 Excl.GSTTL Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result.
The TL-Smoother is an addon module for 3D printer stepper motor drivers.
The board provides flyback diodes (freewheeling diodes) for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver.
You will get smoother movement, especially on the delta-style 3D printer under DVR8825 stepper drivers or A4988 / 2 drivers.
I3 and UM models can also be used, and different machines will have different clipping effects.
Twotrees MKS WIFI Robin V1.0 ESP-12S ESP8266
In stock
₹900.00 Incl.GST / ₹762.71 Excl.GSTAuto search hotspot after power-on,connect hotspot directly by the screen.
RepetierHost/pronterface remote control instead of usb.
With “MKS Plugin”(developed by makerbase for cura),cura remote control and transfer files(100kb/s).
PC or mobile phone’s browser remote control and transfer files.(developing…)
With “MKS CLOUD”APP (developed by makerbase), user can control and monitor 3d printer in other city.
