XTOOL
IKIER
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
xTool F1
XTool P2
xTool D1 Pro 40W + 10W Kit
xTool D1 Pro
xTool M1
Air Assist Set
Honeycomb Panel Set
Extension Kit
Motheboard
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
SCULPFUN SF-A9
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Twotrees TL-Smoother Plus module For 3D printer motor drivers
₹250.00 (Incl. GST)
- TL Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result.
- The TL-Smoother is an addon module for 3D printer stepper motor drivers.
- The board provides flyback diodes (freewheeling diodes) for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver.
- You will get smoother movement, especially on the delta-style 3D printer under DVR8825 stepper drivers or A4988 / 2 drivers.
- I3 and UM models can also be used, and different machines will have different clipping effects.
In stock
In stock
Check Estimated Delivery at
Shipping to IN
19
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
TL Smoother Addon Module Board Kit for 3D Printer Pattern Elimination Motor Clipping Filter. This product mainly aims at the ripple generated by parallel 3D printer printing, especially the effect of using 8825 drive and low resistance motor. It can effectively eliminate the uneven signal wave at low speed and low speed so as to achieve the effect of relative certificate signal wave when using 8825 drive 24V power supply Delta machine
The TL-Smoother is an addon module for 3D printer stepper motor drivers. The board provides flyback diodes (freewheeling diodes) for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver.
You will get smoother movement, especially on the delta-style 3D printer under DVR8825 stepper drivers or A4988 / 2 drivers. I3 and UM models can also be used, and different machines will have different clipping effects.
Features:
- TL Smoother can effectively eliminate the mechanical chatter generated by 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result.
- The TL-Smoother is an addon module for 3D printer stepper motor drivers.
- The board provides flyback diodes (freewheeling diodes) for the motor outputs, so they are also protected against inductance voltages in the unpowered state of the driver.
- You will get smoother movement, especially on the delta-style 3D printer under DVR8825 stepper drivers or A4988 / 2 drivers.
- I3 and UM models can also be used, and different machines will have different clipping effects.
Package Include:
1*Twotrees TL-Smoother Plus Module + Cable
44 reviews for Twotrees TL-Smoother Plus module For 3D printer motor drivers
Clear filters
TwoTrees is one of the biggest producer of 3d printer and accessories in China, today comprises R&D, Produce, and Retailing; that creates high-quality products. It is a technology company present in all four major sectors of the 3Dprinter market: 3D Printers, Laser engravers, Spare parts & accessories and filaments.
TwoTrees currently employs over 200 people across the world and reported sales of 10 million dollars in 2021. Over these years, TwoTrees has carefully preserved and enhanced consumer experience by resolutely focusing on the quality of their products and services. Vertical integration across the value chain cultivates this excellence both upstream and downstream, from sourcing of the finest raw materials to production and worldwide retailing. This model guarantees the excellence of our products over time.
We are every bit as uncompromising about our ethics and our underlying social and environmental responsibilities. TwoTrees has always been strongly committed to ethical behavior and insists on integrity in all our activities and relations, whether with employees, partners or other stakeholders.
More Products
16 in 1 Sensor kit Compatible with Raspberry Pi 3 & Raspberry Pi 2 Model B
In stock
Original price was: ₹1,699.00.₹1,490.00Current price is: ₹1,490.00. (Incl. GST)
SKU:
16IN01
Two Trees -TTC 450 CNC Router Machine Kit, High Precision and Accuracy
In stock
₹37,990.00 (Incl. GST)
SKU:
TwoTreesTTC450
Super Capacitor 2.7V 100F Capacitor Farad
In stock
Original price was: ₹649.00.₹499.00Current price is: ₹499.00. (Incl. GST)
SKU:
SC-2.7V
Twotrees PTFE 2x4mm Blue/White/Red/Black Teflon Tube 3D Printer Filament
In stock
₹249.00 (Incl. GST)
Black
Blue
Red
Transparent
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
130501008
SUNLU PLA+ Silk Silver 3D Printer Filament 1.75mm
In stock
₹2,399.00 (Incl. GST)
SKU:
PLA+SilkSilver
Red Optical Limit Switch Module with White 0.5m Wire for 3D Printes and Mini CNC
In stock
₹129.00 (Incl. GST)
SKU:
MO-SWOP
Anusha Anand (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Krishna tripathi (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Shabnam Begum (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Kamal Jaiswal (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Mani Shankar (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Kamalesh Mehta (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Geet Dubey (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Campaben Desai (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Ijay Pandey (verified owner) –
Ahilan Garg (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Angayarkanni Chauhan (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Hemanta Grover (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Jaswant Sharma (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Chetan Sinha (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Dhiraj Gopal (verified owner) –
Tamia Goswami (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Shriram Sharma (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Mohammad Aarif (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Acchutan Garg (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Sayujya Kapoor (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Sahil Mallhotra (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Damini Jaiswal (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Shrikant Dubey (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Bhagavan Mehto (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Gajendra Srivastav (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Beeja Gupta (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Sukhwinder Bansal (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Ivaan Dwivedi (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Achala Bisht (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Abheek. Garg (verified owner) –
Kishori Jha (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Ramnath Gupta (verified owner) –
Santa ben Jaiswal (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Subash Singh (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Shahanaj Khan (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Sona Iyengar (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Sunaina Garg (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Priyadarshan Karthick (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Ananda Sachdeva (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Yogesh Dewan (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Kishori Sinha (verified owner) –
Harshil Agarwal (verified owner) –
Dhruv Patel (verified owner) –
Girilal Pandey (verified owner) –