XTOOL
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
Apparel Printer
MetalFab
xTool SafetyProâ„¢ AP2 Air Purifier
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
iCube Series
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Showing all 11 resultsSorted by popularity
Z-Axis Tool Setting Touch Plate Probe
In stock
₹499.00 Incl.GST / ₹422.88 Excl.GST• This Touch Plate is used to find the offset to your work piece on your CNC build.
Inductive Proximity Sensor – LJ12A3-4-Z/BX NPN DC6-36V 4mm Normally Open Proximity Switch
In stock
₹427.00 Incl.GST / ₹361.86 Excl.GST• Red LED checks the state of the proximity sensor
• High repeated positioning accuracy
• High switching frequency
• Wide voltage range
• Outer (Thread) Diameter: M12
• Antivibration, dust, water, and oil prevention
• Reverse power protection, short circuit protection, directly connecting with PLC
• Can replace small switches and limit switches
16 in 1 Sensor kit Compatible with Raspberry Pi 3 & Raspberry Pi 2 Model B
In stock
Original price was: ₹1,699.00.₹1,490.00Current price is: ₹1,490.00. Incl.GST / ₹1,262.71 Excl.GST
IR Remote Control Extension Cord Cable
In stock
₹449.00 Incl.GST / ₹380.51 Excl.GST• Power: 5V ( Home appliance USB or 5V power supply )
• Carrier frequency: 38KHZ
• Peak wavelength: 940NM
• Receiving distance: 18-20M
• Launch distance: 18-20M
• Cable length from USB to receiver: approx. 1.4 M
Heart Rate Monitor Kit with AD8232 ECG sensor module
In stock
Original price was: ₹579.00.₹429.00Current price is: ₹429.00. Incl.GST / ₹363.56 Excl.GST• Designed to extract, amplify, and filter small biopotential signals.
• Leads-Off Detection.
• Shutdown Pin.
• LED Indicator.
• Analog Output.
• 3.5 mm Jack for Biomedical Pad Connection.
Makerbase 3D Touch Sensor Auto Bed Leveling Reprap Mk8 I3 Ender 3d Printer Parts
In stock
₹2,199.00 Incl.GST / ₹1,863.56 Excl.GSTShell Material: PC Voltage: 5V
Current: 15mA
Max. Current(Peak): 300mA
Cable Length: Short:200mm Long: 1000mm
Wire: 3pin: Green: -,GND; Red: +5V; Orange: Signal Cable
2pin: Black: -,GND; White: Zmin
Thermistor 100k NTC with 1 Meter Cable Temperature Sensor No connector
In stock
₹100.00 Incl.GST / ₹84.75 Excl.GST High accuracy: ±1%
Resistance value at 25°C=100K
 Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter
Operating temperature range: -40 ° C … + 300 ° C
 Dissipation power factor: ≥ 5MW / ° C (static air)
Rated power: 45MW
Thermal time constant ≤ 7S (static air)
Temperature Coefficient of Resistance; -2-5% / ° C
100K NTC 3950 Thermistors Thermal Sensors with dupont Cable for 3D Printer
In stock
₹140.00 Incl.GST / ₹118.64 Excl.GSTHigh accuracy: ±1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter
Operating temperature range: -40 ° C … + 300 ° C
 Dissipation power factor: ≥ 5MW / ° C (static air)
Rated power: 45MW
Thermal time constant ≤ 7S (static air)
Temperature Coefficient of Resistance; -2-5% / ° C
TTP224 4-way Capacitive Touch Switch Sensor Module
In stock
₹69.00 Incl.GST / ₹58.47 Excl.GSTOnboard TTP224 capacitive touch sensor IC 4 keys
4 board-level status indicator
Working voltage: 2.4V-5.5V
Advanced Pins breakout, so that the output mode and working mode selectable.
Low power selection
HB100 Microwave Doppler Radar Wireless Motion Sensor
In stock
Original price was: ₹290.00.₹210.00Current price is: ₹210.00. Incl.GST / ₹177.97 Excl.GST• Low current consumption (typical 30 mA)
• CW or pulse operation
• Flat profile
• Long detection range (20 m)
• Supply voltage: 4.75V to 5.25V
• X-Band Frequency: 10.525 GHz
• Minimum Power Output: 13 dBm EIRP
Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 8mb Memory USB-TTL CH340G Compatible for Arduino UNO
In stock
Original price was: ₹999.00.₹699.00Current price is: ₹699.00. Incl.GST / ₹592.37 Excl.GST• Microcontroller: ATmega328IC
• Wi-Fi: ESP8266
• USB-TTL converter: CH340G
• Power Output: 5V-800mA
• Power input USB: 5V (500mA max.)
• Power input VIN/DC Jack: 9-24V
• Power Consumption: 5V 800mA
• Logic Level: 5V
• WiFi: 802.11 b/g/n 2.4 GHz
• USB type: Micro USB
• USB Clock Frequency: 16 MHz
• Operating Supply Voltage: 5V
• Digital I/O Pins: 14
• Analog I/ O Pins: 6
• Memory Size: 32 Mb
• Interface Type: serial
• Operating temperature: −40С°/+125С°
