XTOOL
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
D Series
xTool SafetyProâ„¢ AP2 Air Purifier
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
SCULPFUN SF-A9
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Showing all 15 resultsSorted by popularity
Arduino(Compatible) UNO R3 with usb cable
In stock
₹1,485.00 Incl.GST / ₹1,258.47 Excl.GST• Microcontroller : ATmega328 SMD.
• Operating Voltage : 5V.
• Supply Voltage recommended :  7-12V DC.
• Digital I/O Pins : 14 (of which 6 provide PWM output).
• Analog Input Pins : 6.
• DC Current per I/O Pin : 40 mA.
• DC Current for 3.3V Pin : 50 mA.
• Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader.
• SRAM : 2 KB (ATmega328).
Ramps 1.6 4-layer Control Panel Mainboard Expansion Board For 3D Printer Parts
Out of stock
₹650.00 Incl.GST / ₹550.85 Excl.GSTThe board can be extended to LCD and other parts.
The board has a heater and fan MOSFET outputs and 3 thermistor interfaces.
The LED will light when the heater has output.
The heated bed has additional 11A fuses.
Two Z motor outputs available in case you want to connect to Prusa type printer.
Has 5 stepper motor outputs.
The pin socket is designed to be easily replaced or removed for future design.
I2C and SPI pins are available for future expansion.
These connectors are gold-plated and have a rated current of 3A, which is very compact.
Support motor drivers: support A4988 and DRV8825
PICkit3 Debugger Programmer Emulator Controller Development Board Without 6pin cable & DVD
Out of stock
Original price was: ₹1,499.00.₹999.00Current price is: ₹999.00. Incl.GST / ₹846.61 Excl.GST• Full-speed USB support using Windows standard drivers
• Real-time execution
• Processors run at maximum speeds
• Built-in over-voltage/short circuit monitor
• Low voltage to 5V (1.8 to the 5V range)
• Read/write program and data memory of the microcontroller
• Program up to 512K byte flash
I2C Bi-Directional logic Level Converter- 4 Channel
Out of stock
Original price was: ₹35.00.₹25.00Current price is: ₹25.00. Incl.GST / ₹21.19 Excl.GST• Material: ABS + metal
• Mutual transform between 5V TTL and 3.3V TTL
• Four channels of logic and high voltage low voltage logic can two-way transform
• Portable and lightness, with 2 rows 6 pin contact pins
Mega 2560 ATmega2560-16AU Board without USB Cable
Out of stock
Original price was: ₹1,479.00.₹1,099.00Current price is: ₹1,099.00. Incl.GST / ₹931.36 Excl.GST• 54 digital input / output terminals (14 of which have programmable PWM outputs).
• 16 analog inputs.
• 4 UARTs (hardware serial ports).
• 16 MHz crystal clock.
• Operating voltage: 6 ~ 12v.
USBASP USBISP 3.3 5V AVR Downloader Programmer
Out of stock
Original price was: ₹320.00.₹250.00Current price is: ₹250.00. Incl.GST / ₹211.86 Excl.GST• USB interface can provide 5V power supply for the downloader and the target board.
• 500mA Polyswitch to prevent damage of computer USB port.
• When the output current is greater than 500 mA (overcurrent or short circuit), the PolySwitch will partition current immediately to protect the computer motherboard! When short circuit faults remove, polyswitch will automatically return to normal state, the programmer can continue to normal use.
UNO R3 Development Board Improved ATmega328P Type C Interface
In stock
₹650.00 Incl.GST / ₹550.85 Excl.GST
New Makerbase MKS Robin Nano V3.1 Motherboard for 3D Printer
In stock
₹3,499.00 Incl.GST / ₹2,965.25 Excl.GSTUpgrade Type: This 3D printer motherboard is an upgrade from the previous model, which means that this motherboard can have a newer performance on the machine with the same repository just by modifying the motherboard type to compile the relevant firmware
Anti Interference Performance: The 3D printer motherboard has anti interference ability, which will make the machine play more stable and make the working process more great
TTL FTDI Transmitter USB For 3.3V/5V Dual power FT232RL MWC Programmer
In stock
₹180.00 Incl.GST / ₹152.54 Excl.GSTUSBÂ Connector type: USB-Mini
Chip Used:Â FT232RL
Output Voltage 5v and 3.3v Indicator LEDs USB Connector
Automatic detection of data transfer speeds up to 1Mbps
Data exchange capability with an external interface with UART protocol
Supports Windows 8, Windows 7,  Windows Vista, Windows XP, Linux, Mac OS X, Windows CE 4.2-5.2, Windows CE 6.0
ARM STM32 Arduino Minimum System Dev Board
In stock
Original price was: ₹399.00.₹299.00Current price is: ₹299.00. Incl.GST / ₹253.39 Excl.GST• Frequency: 72 MHz
• Operating Voltage: 3.3 V
• Input Voltage (recommended): 3 V – 12 V
D1 ESP8266 Wifi Development Board
In stock
Original price was: ₹369.00.₹259.00Current price is: ₹259.00. Incl.GST / ₹219.49 Excl.GST• Based on ESP-8266EX.
• Arduino compatible, using Arduino IDE to program.
• Support OTA wireless upload.
• Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
• The direct use of Arduino IDE development, the same operation with Arduino UNO.
• Operating Voltage: 3.3V
• Digital I/O Pins: 11
• Analog Input Pins: 1
USBASP ISP AVR Programmer
In stock
Original price was: ₹259.00.₹179.00Current price is: ₹179.00. Incl.GST / ₹151.69 Excl.GST• Allows you to read or write the microcontroller EEPROM, firmware, fuse bits and lock bits
• Support for Windows, Mac OS X and Linux (will work on Windows 8.1)
• 5 KB/sec maximum write speed
• Software controlled SCK option to support targets with low clock speed (< 1.5MHz)
• The driver will work on both 32 and 64 bit platforms.
• On Linux And Mac OS X no kernel driver is required, just use AVRdude and specify the correct port.
AVR ISP MKII compatible USB clone programmer
In stock
Original price was: ₹2,499.00.₹1,799.00Current price is: ₹1,799.00. Incl.GST / ₹1,524.58 Excl.GST• Acceptable target power voltage 2~5V.
• Competitive with Window XP, Window 7, Window 8.
5V MAX II EPM240 CPLD Minimum System Core Board Development Board
In stock
Original price was: ₹4,749.00.₹3,999.00Current price is: ₹3,999.00. Incl.GST / ₹3,388.98 Excl.GST• This CPLD chip is adapted to good low-cost CPLD/FPGA introduction.
• It can be used for product verification and development with Byte- and USB- downloader.
• Easy to use and installation: the module has JTAG, power interface and all connected pins you need, it can run after connecting to DC 5V power supply.
JHW2013 USB High Speed Programmer
In stock
₹1,999.00 Incl.GST / ₹1,694.07 Excl.GST• USB 2.0 interface, the speed is 12Mbps.
• The speed of reading and writing is very fast.
• Auto detect chip models.
• Auto select power voltage.
• Auto off-line chip copy.
