XTOOL
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
Apparel Printer
MetalFab
xTool SafetyProâ„¢ AP2 Air Purifier
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
iCube Series
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Showing all 10 resultsSorted by popularity
Arduino(Compatible) UNO R3 with usb cable
In stock
₹1,485.00 Incl.GST / ₹1,258.47 Excl.GST• Microcontroller : ATmega328 SMD.
• Operating Voltage : 5V.
• Supply Voltage recommended :  7-12V DC.
• Digital I/O Pins : 14 (of which 6 provide PWM output).
• Analog Input Pins : 6.
• DC Current per I/O Pin : 40 mA.
• DC Current for 3.3V Pin : 50 mA.
• Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader.
• SRAM : 2 KB (ATmega328).
Mega 2560 ATmega2560-16AU Board without USB Cable
In stock
Original price was: ₹1,479.00.₹1,099.00Current price is: ₹1,099.00. Incl.GST / ₹931.36 Excl.GST• 54 digital input / output terminals (14 of which have programmable PWM outputs).
• 16 analog inputs.
• 4 UARTs (hardware serial ports).
• 16 MHz crystal clock.
• Operating voltage: 6 ~ 12v.
USBASP ISP AVR Programmer
In stock
Original price was: ₹259.00.₹179.00Current price is: ₹179.00. Incl.GST / ₹151.69 Excl.GST• Allows you to read or write the microcontroller EEPROM, firmware, fuse bits and lock bits
• Support for Windows, Mac OS X and Linux (will work on Windows 8.1)
• 5 KB/sec maximum write speed
• Software controlled SCK option to support targets with low clock speed (< 1.5MHz)
• The driver will work on both 32 and 64 bit platforms.
• On Linux And Mac OS X no kernel driver is required, just use AVRdude and specify the correct port.
UNO R3 Development Board Improved ATmega328P Type C Interface
In stock
₹650.00 Incl.GST / ₹550.85 Excl.GST
TTL FTDI Transmitter USB For 3.3V/5V Dual power FT232RL MWC Programmer
In stock
₹180.00 Incl.GST / ₹152.54 Excl.GSTUSBÂ Connector type: USB-Mini
Chip Used:Â FT232RL
Output Voltage 5v and 3.3v Indicator LEDs USB Connector
Automatic detection of data transfer speeds up to 1Mbps
Data exchange capability with an external interface with UART protocol
Supports Windows 8, Windows 7,  Windows Vista, Windows XP, Linux, Mac OS X, Windows CE 4.2-5.2, Windows CE 6.0
ARM STM32 Arduino Minimum System Dev Board
In stock
Original price was: ₹399.00.₹299.00Current price is: ₹299.00. Incl.GST / ₹253.39 Excl.GST• Frequency: 72 MHz
• Operating Voltage: 3.3 V
• Input Voltage (recommended): 3 V – 12 V
D1 ESP8266 Wifi Development Board
In stock
Original price was: ₹369.00.₹259.00Current price is: ₹259.00. Incl.GST / ₹219.49 Excl.GST• Based on ESP-8266EX.
• Arduino compatible, using Arduino IDE to program.
• Support OTA wireless upload.
• Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
• The direct use of Arduino IDE development, the same operation with Arduino UNO.
• Operating Voltage: 3.3V
• Digital I/O Pins: 11
• Analog Input Pins: 1
AVR ISP MKII compatible USB clone programmer
In stock
Original price was: ₹2,499.00.₹1,799.00Current price is: ₹1,799.00. Incl.GST / ₹1,524.58 Excl.GST• Acceptable target power voltage 2~5V.
• Competitive with Window XP, Window 7, Window 8.
5V MAX II EPM240 CPLD Minimum System Core Board Development Board
In stock
Original price was: ₹4,749.00.₹3,999.00Current price is: ₹3,999.00. Incl.GST / ₹3,388.98 Excl.GST• This CPLD chip is adapted to good low-cost CPLD/FPGA introduction.
• It can be used for product verification and development with Byte- and USB- downloader.
• Easy to use and installation: the module has JTAG, power interface and all connected pins you need, it can run after connecting to DC 5V power supply.
JHW2013 USB High Speed Programmer
In stock
₹1,999.00 Incl.GST / ₹1,694.07 Excl.GST• USB 2.0 interface, the speed is 12Mbps.
• The speed of reading and writing is very fast.
• Auto detect chip models.
• Auto select power voltage.
• Auto off-line chip copy.
