48W
![iKier K1 Pro Max](https://mechblock.in/wp-content/uploads/2023/07/20230627202432-150x150.webp)
![iKier K1 Pro Max](https://mechblock.in/wp-content/uploads/2023/07/48W-3-150x150.webp)
![iKier K1 Pro Max](https://mechblock.in/wp-content/uploads/2023/07/48W-7-150x150.webp)
![iKier K1 Pro Max](https://mechblock.in/wp-content/uploads/2023/07/48W-6-150x150.webp)
![iKier K1 Pro Max](https://mechblock.in/wp-content/uploads/2023/07/48W-5-150x150.webp)
![iKier K1 Pro Max](https://mechblock.in/wp-content/uploads/2023/07/48W-2-150x150.webp)
![iKier K1 Pro Max](https://mechblock.in/wp-content/uploads/2023/07/48W-1-150x150.webp)
Apply Coupon: MECHBLOCK | All Order comes with GST Invoice.
Apply Coupon: MECHBLOCK | All Order comes with GST Invoice.
₹249,990.00 Incl GST (₹211,855.93 +18%GST)
Out of stock
Out of stock
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
48W / 24W Laser Power Switching: The World’s First Gear Switching Laser Module. When you need to cut, you can use the 48W gear, and the laser power is fully turned on; when you need to engrave, you can use the 24W laser gear, and the engraving is more precise.
Engraving speed up to 900mm/s: The engraving speed of IKIER K1 can reach up to 900mm/s, which is 4 times faster than other machines in the industry. This speed has already reached the highest level in the current industry, maximizing your productivity to the fullest.
Motorized Z-axis: The days of manual focusing are over. IKIER’s intelligent Z-axis helps you achieve autofocus by automatically measuring the distance to the object and automatically adjusting the focus.
Automatic Sinking During Cutting: IKIER’s automatic sinking cutting technology can increase the maximum cutting depth by 35% compared to machines with the same power, while also providing better cutting results.
Resume Engraving: IKIER has achieved a world-first power-off resume engraving, which prevents work failures caused by unexpected power outages and eliminates material waste.
Automatic Air Assist: When switching from engraving to cutting, the air assist device will automatically turn on to ensure a smooth process and help bring your creative ideas to life.
Infrared Positioning: The infrared positioning function of a laser engraving machine uses infrared rays to accurately locate the position of the material to be engraved. It projects a visible light onto the surface of the material, allowing for precise alignment of the engraving area and the design.
Flame Detection Systems: In the event of a flame detection, the machine will sound an alarm and send a notification to a linked mobile device, while the laser module will automatically return to its original position.
Child Safety Lock: The child safety lock prevents accidental activation of the machine, ensuring the safety of household members.
Brand: iKier
Model: K1 Pro Max 48W / 24W
Engraving Size: 410mm*410mm
Electric Power: 220W
Laser Power: 44-48W, 21W-24W
Spot Size: 0.08mm*0.1mm (24W) 0.1mm*0.15mm (48W)
Engraving Precision: 0.01mm Engraving Accuracy
Laser Focal Length: 40mm
Laser Wave: 455±5nm
Focusing method: Autofocus or Manual, and add Infrared Positioning
Advanced Z-Axis: Automatic Sinking During Cutting
Operating Systems: Windows, macOS, Android, iOS
Control Software: LightBurn, LaserGRBL
File Types: SVG, DXF, JPG, JPEG, PNG, BMP, TIF, CR2, etc.
Connecting Interfaces: USB, Wi-Fi, TF Card
Motherboard: 32-Bit Control Board With Wifi
Control Terminal: 4.3 inches
Input Voltage: AC100-240V, 50/60Hz
Output Voltage: DC24V, 5A
Weight | 13 kg |
---|---|
Dimensions | 78 × 50 × 16 cm |
Brand | |
Condition | |
HSN Code | |
Connectivity | |
Control Software | , |
Electrical Power | |
Laser Spot Size(mm) | |
Optical Power | |
Supporting Format | , , , , , , |
Working Area(mm) | |
Max. Engraving Speed | |
Operating System | , , |
XTOOL | ATOMSTACK | IKIER | SCULPFUN | ORTUR Product of these Brands come with 1 Year Warranty.
1.Does mechblock.in check the products before shipping them to me?
Yes., of course.
We have a professional Quality Control team. They will check carefully for each item we received from suppliers and manufacturers to avoid sending defective goods to our customers.
If a item is found defective in our QC test, it will be returned to the supplier / factory. Please don’t worry about receiving a defective item because we are committed to being a trustworthy and reliable seller on international on-line shopping market.
2.Are Products Guaranteed / Is There A Warranty?
Yes, XTOOL | ATOMSTACK | IKIER | SCULPFUN | ORTUR products you buy from mechblock.in has a guarantee of quality and will exactly match the description on the website.
Our warehouse that supply mechblock.in are strictly evaluated by us, and we provide you an even better reassurance of consistent high quality thanks to our in-house QC team. We double-check the contents of all orders carefully before dispatch to our customers. You can be confident about ordering from mechblock.in just as much as any well known retailer.
3. How long dose it take to have my orders shipped after the payment is made?
1). Processing time 1-2 business days normally: During this period, we do strict quality-control tests and get the items carefully packed.
2). Sometimes the item in your order is really a hot seller and it may be just sold out at that time. It will take us 1-2 more days to get it available in stock again. In this case, The processing time will be 3 business days.
If you don’t receive any shipping confirming over three days after the payment is made, please kindly contact our customer service . They will check for you.
4. What should I do if my items arrived damaged?
Rarely, rough handling by the courier can lead to physical damage to your goods, e.g. broken screen.
If this has happened, please follow these steps:
If possible, raise a complaint directly with the delivery representative of the courier company before you sign for the goods. They will advise you on the complaint procedure.
If you already signed for the packet, take photos showing the damage and contact the local office of the courier/delivery company to complain. They will have a complaining procedure which will enable you to get compensation.
Next, contact support@mechblock.in immediately with your order number and a full description / pictures of the broken item issue. We will contact the courier company from our end.
Once the courier company confirms that the case is valid, they will compensate mechblock.in , and we will pass on this compensation to you. The compensation varies from case to case and is different for each delivery company. In some cases you will need to pay to post the broken item back to mechblock.in in order for us to send out a new piece.
5. What should I do if my products went wrong after a period of use?
If you encounter quality issues within the warranty period, you can ask for us. Except for this case, The mechblock.in is not responsible for product damage caused by customers’ wrong operation or the uncontrollable natural reasons . Every product has a specific warranty period. If it is not stated in the product listing, please contact our customer service team.
In this case, please kindly provide us with proof as below:
The photos of original mechblock.in package with front and back sides
The photos or video of the defective item(s)
The photos, video or screenshot showing the malfunction of the defective item(s)
We will usually a replacement as soon as the problem is confirmed and after you return your order.
Sometimes you may need to ship the defective item back to us for free repair service or a new replacement. Customer should cover the return shipping fee, and mechblock.in is responsible for the shipping costs of arranging reshipment by air mail.
How to Claim Warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
*All Generic & Non-Branded products do not come under warranty.
**Why buy from us instead of importing directly?
Here at Mechblock we build strong relationships with all suppliers to enable us to supply Perfect Production Products, Priced effectively which are Delivered Promptly. Our aim is to provide a complete Production Package
Mechblock are authorized and official distributors for many major manufacturers genuine products. We can offer parts against drawings and assist in specifying parts to drawings, assuring technically suitable parts are used. With our line of communication and first hand understanding of each manufacturers in-house processes we are able to provide full traceability of the sourced part for quality assurance.
Having built strong relationships over many years with major manufacturers and given our market reputation for excellency, our suppliers work hard to support our every effort in supplying the very best in service support and distribution to you, the customer.
With over 20 years combined experience within the tooling and fastening industries we are best placed to support you, the customers, in all aspects of manufacturing and assembly process. Mechblock train many weeks of the year onsite with manufacturers to extend our knowledge base getting our engineers trained in new and old products and the suitability of such product to application.
We keep a large stock on the shelf. Our range includes high quality Laser machines to Industrial equipments including spare parts and accessories along with more specialist high strength and structural stabilities of all products.
Mechblock will perfectly source product for each customer and each product line ensuring consistent supply and decreasing setting problems. We are on hand to support any production issue that may arise complimented by our Support & Service division there is no problem we are unable to resolve.
In stock
In stock
In stock
In stock
In stock
In stock
No account yet?
Create an AccountWhatsApp us
Roghosh Mallhotra (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
ManishBansal (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Anjana Sharma (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Kapil Shaarma (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Tanaya Anand (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Kulwant Singh (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Charudatta Tayal (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
varun Sood (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Pravin Banerjee (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Kavita Pandey (verified owner) –
Karali Dwivedi (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Malla amma (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Santosh Saxena (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Puja Mishra (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Bindu Mehta (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Mana Gupta (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Shaili Banerjee (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Ramesh Chopra (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Sukumar Kohli (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Pala Mehta (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Mina Jaiswal (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Sangitaben Mehta (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Poonam Jha (verified owner) –
Amutha Verma (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Narasamma Iyengar (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Damayanti Parihar (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Uttam Goswami (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Geet Jaiswal (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Balwinder Rana (verified owner) –
Dhruv Chadha (verified owner) –
Larisa Gupta (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Sandhya Dedha (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Daiva Mishra (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Navya Gupta (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Rukmini Anand (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Nikhil Karthick (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Aditi Goel (verified owner) –
Agilan Rawat (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Avanindra Chauhan (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Ahilan Garg (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Aniruddh Pandey (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Sunaina Garg (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Hiran Dwivedi (verified owner) –
Naman Narayan (verified owner) –
Palana Saini (verified owner) –
Kamalamma (verified owner) –