TDA7297 Amplifier Board Module Base Kit
Original price was: ₹150.00.₹110.00Current price is: ₹110.00. (Incl. GST)
2 Position 2.54mm Female Jumper / Shunt Socket Pack of 10pcs
₹99.00 (Incl. GST)
Sale
I2C Bi-Directional logic Level Converter- 4 Channel
Original price was: ₹35.00.₹25.00Current price is: ₹25.00. (Incl. GST)
- Material: ABS + metal
- Mutual transform between 5V TTL and 3.3V TTL
- Four channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 6 pin contact pins
Out of stock
Out of stock
This product is currently sold out.
No worries! Enter your email, and we'll let you know as soon as it's back in stock.
15
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Description
This Level Converter- 4 Channel features four high speed bi-directional 4 channels, allowing for safe and easy communication between devices operating at different logic levels.
The logic level converter circuit convert signals as low as 1.8 V to as high as 5 V and vice versa, and its four channels are enough to support most common bidirectional and unidirectional digital interfaces, including IC, SPI, and asynchronous TTL serial.
If you have ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be? A bi-directional Level Converter- 4 Channel is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices. What really separates this Logic level converter from our previous versions is that you can successful
How to use:
- High voltage (5V for example) to the HV pin
- Low voltage (3.3V for example) to LV
- Gound from the system to the GND pin.
Specifications and Features:
- Mutual transform between 5V TTL and 3.3V TTL
- Four channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 6 pin contact pins
- Level Converter- 4 Channel Compatible with the bread plate, can be used directly put on the breadboard
- 4 Channel Module (great for I2C or SPI) and will work with all microcontrollers, Arduino, Raspberry Pi, Intel Edison, NXP Mbed
Package Include:
- I2C Bi-Directional logic Level Converter- 4 Channel -1PC
50 reviews for I2C Bi-Directional logic Level Converter- 4 Channel
Clear filters
Welcome to mechBlock.in / Sun Enterprises We are a leading engineering and technology company based in India that specializes in cutting-edge mechanical and robotic solutions. Founded in 2020, our mission is to design and develop innovative systems that can help our clients improve efficiency, reduce costs, and enhance performance.
Our team of highly skilled engineers and technicians have extensive experience in the field of mechanical engineering, robotics, and automation. We have the knowledge and expertise to design, develop, and implement complex systems that can meet the unique needs of our clients.
We work with a wide range of industries including manufacturing, transportation, construction, and logistics to provide customized solutions that can improve productivity, safety, and performance. Our solutions range from advanced robotic systems to precision-engineered mechanical components, and everything in between.
We believe in delivering quality work and providing excellent customer service. We work closely with our clients to understand their requirements and deliver solutions that exceed their expectations. Our portfolio includes a wide range of successful projects, from automated assembly lines to precision robotic systems.
Our goal is to be the go-to partner for companies that want to leverage the latest mechanical and robotic technologies in India. We’re always looking for new challenges and opportunities to collaborate with companies that share our vision of a smarter and more efficient future.
More Products
SCULPFUN S10 Laser Module 10W for Laser Engraving Machine
In stock
₹30,999.00 (Incl. GST)
SKU:
S10lLM
xTool S1 Blue + 1064nm IR Laser Kit: Enclosed Diode Laser Engraver & Cutter
In stock
₹251,880.00 – ₹335,880.00 (Incl. GST)
Black
White
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
XtoolS1BLUE
GX16 Docking Set Connector
In stock
₹165.00 – ₹310.00 (Incl. GST)
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
MOGX16DS
USONGSHINE 3D Printer Cooling Fan 5010 DC 24V/12V/5V Brushless Cooling Fan with 2Pin Wire Mini Fan for 3d Printer Parts
In stock
₹180.00 – ₹220.00 (Incl. GST)
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
5010-24/12/5
Flashing LED Light Valve Caps 2Pcs
In stock
Original price was: ₹230.00.₹170.00Current price is: ₹170.00. (Incl. GST)
SKU:
MB-FLLVC
Surajit Sinha (verified owner) –
Quite easy to use, nice design, surely will buy again
Parveen Shama (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Jakir Khan (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Monika Rana (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Geet Pandey (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
LilavatiKohli (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Narasamma Iyengar (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Gangabai Joshi (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Bala Subramaniam (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Ranjeet Desai (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Sandeep Sahu (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Chameli Bansal (verified owner) –
Suresh Mallhotra (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Tara Iyengar (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Rabiya Ansari (verified owner) –
Jagvi Jaiswal (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Ceraja (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Kavita Dubey (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Shikha Garg (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Satish Ganguly (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Pushpa Rani (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Syed Afroz (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Ratna Kaushik (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Nita Sharma (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Chandravti Ghosh (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Kalyani Kohli (verified owner) –
Shital Kohli (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Rames (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Kalpana (verified owner) –
Jayaben Mehta (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Bikash Koushal (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Fulmati Devi (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Tapan Das (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Balaji Venkata (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Sima (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Omprakash Dubey (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Rachana Anand (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Chandraraj Gupta (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Tanea Rawat (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
SheetalSelja (verified owner) –
Enkateshwarlu Dwivedi (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Laksmi Anand (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Shikha Pandey (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Sakina Khan (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Indu Ganguly (verified owner) –
Vijna Chadha (verified owner) –
Ubena Alam (verified owner) –
Didi Mishra (verified owner) –
Anala Iyengar (verified owner) –
Ajay Kant (verified owner) –