Showing all 15 resultsSorted by popularity
Z-Axis Tool Setting Touch Plate Probe
In stock
₹499.00 Incl.GST / ₹422.88 Excl.GST• This Touch Plate is used to find the offset to your work piece on your CNC build.
Inductive Proximity Sensor – LJ12A3-4-Z/BX NPN DC6-36V 4mm Normally Open Proximity Switch
In stock
₹427.00 Incl.GST / ₹361.86 Excl.GST• Red LED checks the state of the proximity sensor
• High repeated positioning accuracy
• High switching frequency
• Wide voltage range
• Outer (Thread) Diameter: M12
• Antivibration, dust, water, and oil prevention
• Reverse power protection, short circuit protection, directly connecting with PLC
• Can replace small switches and limit switches
16 in 1 Sensor kit Compatible with Raspberry Pi 3 & Raspberry Pi 2 Model B
In stock
Original price was: ₹1,699.00.₹1,490.00Current price is: ₹1,490.00. Incl.GST / ₹1,262.71 Excl.GST
IR Remote Control Extension Cord Cable
In stock
₹449.00 Incl.GST / ₹380.51 Excl.GST• Power: 5V ( Home appliance USB or 5V power supply )
• Carrier frequency: 38KHZ
• Peak wavelength: 940NM
• Receiving distance: 18-20M
• Launch distance: 18-20M
• Cable length from USB to receiver: approx. 1.4 M
Inductive Proximity Sensor Top Sensing/Front Sensing – N/O N/C
In stock
₹649.00• When proximity switch is close to some target object, it will send out control signal. It is widely used in machine, paper making, light industry for limiting station, orientation taking count, speeding trial ect.
• It is a component widely used in automatic control industry for detecting, controlling, and noncontact switching.
Thermistor 100k NTC with 1 Meter Cable Temperature Sensor No connector
In stock
₹100.00 Incl.GST / ₹84.75 Excl.GST High accuracy: ±1%
Resistance value at 25°C=100K
 Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter
Operating temperature range: -40 ° C … + 300 ° C
 Dissipation power factor: ≥ 5MW / ° C (static air)
Rated power: 45MW
Thermal time constant ≤ 7S (static air)
Temperature Coefficient of Resistance; -2-5% / ° C
Two Trees 100K NTC Thermistor with XH2.54 Connector 1meter
In stock
Price range: ₹139.00 through ₹150.00100k Ohm NTC Thermistor.
NTC Thin Film Thermistor Cable.
Nominal value: R25 (25 ℃) : (common) 1.5K, 2K, 5K, 10K, 20K, 30K, 47K, 50K, 100K, 200K, 500K, etc.
Resistance precision: ± 1%, ± 2%, ± 3%.
B value R25/50 (common) 3435k, 3600k, 3950k, 3990k, 4100k, 4200k, etc.
B value accuracy: ± 1%.
Recommend the use of parameters: R25℃ = 100 k B25/50 = 3950 k ± 1%)
Package Includes:
1 x 100k NTC Thermistor With Copper TIP for MK8 Extruder
NTC100K Thermistor Temperature Sensor for High Temperature Filament 350 Degree Hotend Kit
In stock
Price range: ₹249.00 through ₹299.00Temperature range of use: – 30 ℃ ~ + 350 ℃.
Dissipation power factor: ≥5 mW / ℃ (static in the air).
Sensor Diameter: 3 mm
Cable Length: 1 meter
Max power rating: 45 mW.
Hot time constant : ≤7 s(in the air)
Temperature coefficient of resistance : – 2 ~ 5% / ℃
Heart Rate Monitor Kit with AD8232 ECG sensor module
In stock
Original price was: ₹579.00.₹429.00Current price is: ₹429.00. Incl.GST / ₹363.56 Excl.GST• Designed to extract, amplify, and filter small biopotential signals.
• Leads-Off Detection.
• Shutdown Pin.
• LED Indicator.
• Analog Output.
• 3.5 mm Jack for Biomedical Pad Connection.
Makerbase 3D Touch Sensor Auto Bed Leveling Reprap Mk8 I3 Ender 3d Printer Parts
In stock
₹2,199.00 Incl.GST / ₹1,863.56 Excl.GSTShell Material: PC Voltage: 5V
Current: 15mA
Max. Current(Peak): 300mA
Cable Length: Short:200mm Long: 1000mm
Wire: 3pin: Green: -,GND; Red: +5V; Orange: Signal Cable
2pin: Black: -,GND; White: Zmin
100K NTC 3950 Thermistors Thermal Sensors with dupont Cable for 3D Printer
In stock
₹140.00 Incl.GST / ₹118.64 Excl.GSTHigh accuracy: ±1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter
Operating temperature range: -40 ° C … + 300 ° C
 Dissipation power factor: ≥ 5MW / ° C (static air)
Rated power: 45MW
Thermal time constant ≤ 7S (static air)
Temperature Coefficient of Resistance; -2-5% / ° C
TWO TREES 3D Printer Filament Break Detection Module with 1m Cable
In stock
Price range: ₹398.00 through ₹399.00Filament Break Detection Module
Material: Plastic
Color: Black/white
Size: Suitable for 1.75mm Filament
Mounting Hole Size: 3.5mm
TTP224 4-way Capacitive Touch Switch Sensor Module
In stock
₹69.00 Incl.GST / ₹58.47 Excl.GSTOnboard TTP224 capacitive touch sensor IC 4 keys
4 board-level status indicator
Working voltage: 2.4V-5.5V
Advanced Pins breakout, so that the output mode and working mode selectable.
Low power selection
HB100 Microwave Doppler Radar Wireless Motion Sensor
In stock
Original price was: ₹290.00.₹210.00Current price is: ₹210.00. Incl.GST / ₹177.97 Excl.GST• Low current consumption (typical 30 mA)
• CW or pulse operation
• Flat profile
• Long detection range (20 m)
• Supply voltage: 4.75V to 5.25V
• X-Band Frequency: 10.525 GHz
• Minimum Power Output: 13 dBm EIRP
Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 8mb Memory USB-TTL CH340G Compatible for Arduino UNO
In stock
Original price was: ₹999.00.₹699.00Current price is: ₹699.00. Incl.GST / ₹592.37 Excl.GST• Microcontroller: ATmega328IC
• Wi-Fi: ESP8266
• USB-TTL converter: CH340G
• Power Output: 5V-800mA
• Power input USB: 5V (500mA max.)
• Power input VIN/DC Jack: 9-24V
• Power Consumption: 5V 800mA
• Logic Level: 5V
• WiFi: 802.11 b/g/n 2.4 GHz
• USB type: Micro USB
• USB Clock Frequency: 16 MHz
• Operating Supply Voltage: 5V
• Digital I/O Pins: 14
• Analog I/ O Pins: 6
• Memory Size: 32 Mb
• Interface Type: serial
• Operating temperature: −40С°/+125С°
