Universal L Bracket
₹89.00 – ₹149.00
Carbide 10pcs PCB Drill Bit Set
₹699.00 – ₹3,499.00
MECHBLOCK S9 Cricket Bat laser Engraving Machine
₹33,999.00 Incl.GST / ₹28,812.71 Excl.GST
ใ90W effect laser beam cutterใOur laser engraver uses the latest 5.5W laser beam shaping technology blue diode laser, it has an ultra-fine 0.06mm sharp laser focus, with super cutting penetration and precision, it can cut up to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel, this is almost beyond the effect of 90W CO2 laser.
Cricket ๐Bat Engraving Machine
In stock
In stock
35
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Description
MECHBLOCK S9 Cricket Bat laser Engraving Machine
Products Description
โ
ใ90W effect laser beam cutterใOur laser engraver uses the latest 5.5W laser beam shaping technology blue diode laser, it has an ultra-fine 0.06mm sharp laser focus, with super cutting penetration and precision, it can cut up to 15mm thick wood, 10mm acrylic, carve ceramics and stainless steel, this is almost beyond the effect of 90W CO2 laser.
โ
ใFast focusing and safe designใOur powerful laser etching machine have the fastest focus design. It combines a fixed-focus lens and a slider. You only need to slide the laser module and tighten the screws to complete the focusing. Very easy and convenient. Meanwhile, the laser machine is equipped with a power switch, which is not available in others. Fixing holes are reserved on the four feet and the body structure to facilitate fixing the machine and the data cable.
โ
ใNew eye protection designใThe laser protective cover perfectly protects your eyes and filters UV light for 98%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles, and prevent pets and children from grabbing the laser spot.
โ
ใSolid and easy installation structure designใ The full-metal structure design makes the machine extremely solid, and it improves the accuracy of engraving. The whole structure is designed for easy assembly, and the assembly can be completed in 10-20 minutes. The structural frame is very durable and remains open to upgrading. During use, you can keep the frame and replace it with other new lasers. Or replace longer metal beams to expand the engraving area.
โ
ใWide compatibility & Precise scale lines axisใThe laser engraving machine can be compatible with LaserGRBL (free, support Windows) or LightBurn (paid, support Windows, Mac OS, and Linux). Engraving file format support: NC, DXF, BMP, JPG, PNG, etc. There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x420mm large area engraving interval can meet your various engraving needs like DIY jewelry wood printer. It is the best DIY etch tool for the craft.
โ
ใAfter-sales guaranteeใWe provide 12-month free maintenance, replacement parts, and technical support services. If you encounter any problems in use, please do not hesitate to contact our seller customer service, our professional after-sales engineer team will solve all problems for you.
|
Item model number
|
MECHBLOCK S9 Laser Machine
|
|
Print Size
|
Recommend Print Size 410*420mm
|
|
Carving Objects
|
All wood, bamboo, paper, plastic, leather, PCB board, aluminum oxide, non-reflective plating and lacquered metal,Utility knife
after blacking |
|
Cutting Objects
|
Cardboard, non-woven fabric, light wood, Acrylic material, thin plastic board.
|
|
Laser power
|
CO2 90W Laser Effect
|
|
Laser output power
|
5.5-6W
|
|
Wave Length
|
445 ยฑ 5nm
|
|
Engraving accuracy
|
0.01m
|
|
Focusing method
|
fixed focus laser, no need to focus
|
|
Laser protective cover
|
Protect the user’s eyes and prevent pets from grabbing the laser spot
|
|
Operating software
|
LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system/Mac
|
|
Input Format
|
NC, BMP, JPG, PNG, DXF, etc
|
|
Data transmission method
|
USB connection
|
|
Input Voltage
|
AC100-240V, 50/60Hz BS Adapter
|
|
Output Voltage
|
DC12V, 5A
|
|
Equipment net weight
|
3.0kg
|
|
Package weight
|
4.4kg
|
|
Equipment size
|
570*600*270mm
|
|
Packing size
|
615*345*130mm
|
|
Certification
|
CE FCC RoHS
|
Details Images
Product packaging
Additional information
| Weight | 4.89 kg |
|---|---|
| Dimensions | 59 × 34.5 × 12 cm |
| Brand | |
| Condition | |
| HSN Code | |
| Working Area(mm) | |
| Expansion Kit Support | |
| SD Card Support | |
| Connectivity | |
| Offline Control / Touch Screen | |
| Electrical Power | |
| Optical Power |
53 reviews for MECHBLOCK S9 Cricket Bat laser Engraving Machine
Clear filters
Shenzhen Sculpfun Technology Co., Ltd. is a company focusing on sculpture products. The company's SCULPFUN brand is committed to creating the best household hobby engraving machine. We hope you can bring you and your family the fun of sculpting through our products. SCULPFUN means "SCULPT YOUR FUN commit
The company cooperates with China's top diode laser companies to conduct in-depth research on laser miniaturization and solutions to consumer sculpture needs. And in-depth cooperation with a number of > laser research institutes for the future use of lasers, we keep researching how lasers can facilitate people's lives.
More Products
SUNLU PLA Meta Black 3D Printer Filament 1.75mm
In stock
₹1,699.00 Incl.GST / ₹1,439.83 Excl.GST
SKU:
Meta-Black
xTool P2S 55W Desktop CO2 Laser Cutter – P2S +F Business Duo, Grey
In stock
Original price was: ₹1,170,480.00.₹900,000.00Current price is: ₹900,000.00. Incl.GST / ₹762,711.86 Excl.GST
SKU:
xToolP2SF1GRY
CNC Engraving Bits 1/8″ Shank Conical V-Bits Tip Flat Bottom Sharp Cutting Router Rotary Tool Set for PCB PVC Wood Acrylic Metal Aluminum 3.175mm 10-90 Degree 10Pcs – 40D, 0.2mm
In stock
₹1,210.00 Incl.GST / ₹1,025.42 Excl.GST
SKU:
EM04-40D*0.2
Rama devi (verified owner) –
I rarely leave a comment, but this item is beyond worth it! Gotta let you guys know!
Jayaben Mehta (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Pala Mehta (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
RashmiDesai (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Dhavlesh Shinde (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Hanita Shinde (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Caturnana Agarwal (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Harikiran Dubey (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Patchouli Patel (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Sanyam Kapoor (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Ehan Mishra (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Upendra Kuswaha (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Ismail Khan (verified owner) –
Vimla Agarwal (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Ranjana Katiyar (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Prabhavati Gupta (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Sivata ben (verified owner) –
Ganga Kant (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Amirthini Bisht (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
NasimaJyoti (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Bharti Sharma (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Akash Choudhary (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Gunav Pandey (verified owner) –
Kaanishk Dwivedi (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Shilpa Jain (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Shanti Mishra (verified owner) –
Darpitaa Shinde (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Chakrapaani Chaturvedi (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Rajeev Kripal (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Kanisha Rawat (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Amirthini Rawat (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Sakina Khan (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Balraj Saxena (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Rajesh (verified owner) –
Puja Mishra (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Meena iyer (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
KeshavMehta (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Nand Kumar (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Anuradha Banerjee (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Advaith Garg (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Deshan Rawat (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Mukesh Rana (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Hasina Sheikh (verified owner) –
Hiralal Singh (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Anish Pandey (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Nikhel Gupta (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Ramila ben (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Joseph (verified owner) –
Jay Mehta (verified owner) –
Sushama Sahani (verified owner) –