SCULPFUN S30 Ultra-33W Laser Engraving & Cutting Machine
₹108,499.00 Incl.GST / ₹91,948.31 Excl.GST
SCULPFUN S30 Ultra-11W Laser Engraving Machine
₹60,999.00 Incl.GST / ₹51,694.07 Excl.GST
SCULPFUN S30 Ultra-22W Laser Engraving Machine
₹90,999.00 Incl.GST / ₹77,117.80 Excl.GST
โข Diode laser output power : 22W
โข Laser focus : 0.08×0.10mm
โข Laser wavelength : 455ยฑ5nm
โข Focusing method : fixed focus column + sliding device
โข Laser protection cover : Equipped with a detachable laser protection cover
โข Engraving accuracy : 0.005mm
โข Engraving area size : standard version is 600x600mm
โข Machine electric power : about 114W
11
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Description
OoFeatures:
- 600x600mm engraving area : the real engraving area is 600x600mm, which makes many of your works not limited by the area, and you can produce most of the large-scale cutting works. In addition, the 600x600mm area is very sufficient, and the service life is extremely long, and there is almost no need to upgrade the structure in future use.
- Enhanced 11W, 22W, 33W three laser options : S30 Ultra series laser uses a single enhanced 6W diode, which makes its actual laser power and cutting ability higher, and provides 11W/22W/33W three through combined design laser options.
- Professional safety design : S30 Ultra series is equipped with emergency stop switch and safety child lock. In an emergency, tapping the emergency stop switch can stop the machine; after pulling out the key, the machine cannot be turned on, which can prevent children from turning it on by mistake.
- One series One structure, easy to upgrade : S30 Ultra series models keep high compatibility in design, S30 Ultra 11W/22W/33W power adapter, structure, and laser cable are all the same. In future upgrades, 11W- 22W-33W you only need to replace the laser head without any other changes.
- Tool box, laser repair box, fixed-focus column holder : S30 Ultra provides professional tool storage boxes and maintenance tool boxes, including mechanical wrenches, tweezers, nozzle cleaners, etc., all of which are conveniently stored in boxes. In addition, a professional fixed-focus column storage box is provided on the machine, which is convenient for storing the fixed-focus column.
- Enhanced 42-bit stepping motor : Enhanced 42-bit stepping motor provides sufficient power to make the machine move at high speed. The torque reaches 4.2 Kgยทcm (ordinary machines are 3.1 Kgยทcm). In future upgrades, even if the laser or the load becomes heavier, there is no need to replace the motor.
- Replaceable protective lens : S30 Ultra series laser adopts innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore its cutting power. One free lens is included in the package with purchase, lenses are very cheap and can be easily purchased from SCULPFUN.
- Built-in high-pressure air-assisted nozzle : S30 Ultra series is equipped with advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist. The powerful airflow blows away the residue, making the cutting surface very clean.
- Upgraded 32-bit air-assisted motherboard : the latest 32-bit motherboard supports automatic air-assisted control function, supports wireless Bluetooth connection to control the machine, and is not limited by the distance of the USB cable.
- Industrial-grade cutting precision : S30 Ultra adopts an extremely strong 0.005mm high-precision linear slide rail X-axis to achieve industrial-grade engraving precision. When comparing small engraving details, the S30 Ultra does not have the wavy patterns that appear on ordinary engraving machines.
- Detachable laser eye shield : S30 series is equipped with a detachable glass eye shield, which will not be dazzling even if you don’t wear glasses. Plus you can easily disassemble it if you don’t need it.
- Solid and durable frame : The S30 series is made of high-strength aluminum alloy, and its frame can withstand a weight of up to 50KG without damage, which is very durable. The frame can be used for a long time and maintain high precision, when the machine needs to be upgraded, only the latest laser needs to be upgraded.
Tech Specs :
Laser Information:
- Diode laser Optical power : 22W
- Laser focus : 0.08×0.08mm
- Laser wavelength : 455ยฑ5nm
- Focusing method : fixed focus column + sliding device
- Laser protection cover : Equipped with a detachable laser protection cover
Machine Information:
- Engraving accuracy : 0.005mm
- Engraving area size : standard version is 600x600mm
- Machine electric power : about 114W
Air pump:
- Type : ainboard-controlled air pump, voltage 24V, flow 30L/min
- Air hose inner diameter : 7.5mm
Motherboard:
- 32-bit air-assisted motherboard, supports Bluetooth wireless connection.
Engraving/cutting materials:
- Carving materials : all kinds of wood (including walnut, cherry wood and other high-density wood), MDF, stone, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramics, dark stone Cutting materials: all kinds of wood (including walnut, cherry wood and other high-density wood), MDF, acrylic board, cardboard, non-woven fabric, bamboo chips, leather, some plastic boards, PCB boards
Power supply:
Power Input : 100-240V AC,
50/60HZ Output : 24V 7A
Packing weight : 9.9kg
Packing size : 865*247*235mm
Certification : CE FCC RoHS FDA ICE certification
Packing list:
1ร S30 Ultra-22W laser
1ร laser shield
1ร Laser Repair Kit
1ร24V automatic air pump
2ร460*230*3mm wood board
2ร460*230 protective aluminum plate
2รlimit switch
1ร24V 7A power adapter
1 x power cord
1รUSB cable
1ร rubber air hose
1ร tool box
1ร laser goggles
Step 1-6 installation package
1ร instruction manual
1ร X-axis assembly
2 x X-profiles
2 x Y profile
1รcontrol box assembly
3รsupport feet
1x cable clamp bag
1x fixed focus column mount
1x spare screw pack
1x Non-slip seat Pack
1ร laser shield
1ร Laser Repair Kit
1ร24V automatic air pump
2ร460*230*3mm wood board
2ร460*230 protective aluminum plate
2รlimit switch
1ร24V 7A power adapter
1 x power cord
1รUSB cable
1ร rubber air hose
1ร tool box
1ร laser goggles
Step 1-6 installation package
1ร instruction manual
1ร X-axis assembly
2 x X-profiles
2 x Y profile
1รcontrol box assembly
3รsupport feet
1x cable clamp bag
1x fixed focus column mount
1x spare screw pack
1x Non-slip seat Pack
PREVIEW
Additional information
| Weight | 10 kg |
|---|---|
| Dimensions | 86.5 × 24.7 × 23.5 cm |
| Brand | |
| Condition | |
| HSN Code | |
| Product Model Name |
SCULPFUN S30 Ultra-22W |
| Machine Electric Power |
114W |
| Diode Laser Power |
22W |
| Laser Wavelenght |
455ยฑ5nm |
| Focal Spot Size |
0.08×0.1mm |
| Engraving Size |
600x600mm |
| Engraving Accuracy |
0.1mm |
| Engraving Material |
acrylic ,bamboo ,cardboard ,leather ,MDF ,non-woven ,PCB board ,plastic ,wood |
| Cutting Material |
acrylic ,bamboo ,cardboard ,leather ,MDF ,non-woven ,PCB boards ,plastic board ,wood |
| Data Transmission Method |
Bluetooth ,USB |
| Operating Software | , , , , , , |
| Supported file formats |
BMP ,DXF ,JPG ,NC ,Others ,PNG |
| Packing size |
86.5*24.7*23.5CM |
| Packing weight |
9.9kg |
56 reviews for SCULPFUN S30 Ultra-22W Laser Engraving Machine
Clear filters
Shenzhen Sculpfun Technology Co., Ltd. is a company focusing on sculpture products. The company's SCULPFUN brand is committed to creating the best household hobby engraving machine. We hope you can bring you and your family the fun of sculpting through our products. SCULPFUN means "SCULPT YOUR FUN commit
The company cooperates with China's top diode laser companies to conduct in-depth research on laser miniaturization and solutions to consumer sculpture needs. And in-depth cooperation with a number of > laser research institutes for the future use of lasers, we keep researching how lasers can facilitate people's lives.
https://youtube.com/shorts/C8w_7hvnnnE
https://youtube.com/shorts/C8w_7hvnnnE
More Products
C-Beam XLarge X/Y Table Bundle
In stock
₹24,880.00 Incl.GST / ₹21,084.75 Excl.GST
SKU:
MO-4S500-1000
Twotrees MK8 Extruder Upgraded Aluminum Block Bowden Extruder 1.75mm Filament Reprap Extrusion – Right hand
In stock
₹750.00 Incl.GST / ₹635.59 Excl.GST
SKU:
110106002
Plastic Hinge for V-Slot 2020/3030/4040/4545 – 4545
In stock
₹164.00 Incl.GST / ₹138.98 Excl.GST
SKU:
MOHD0036P-4545
MK8 Stainless Steel Nozzle 0.4mm SS for 3D Printer
In stock
₹200.00 Incl.GST / ₹169.49 Excl.GST
SKU:
110102203
Pavan Hegde (verified owner) –
I think this is amazing. Lots of features and customizable from every point of view. The few times I asked for help in support they were competent, fast and above all very patient. Really recommend
Parbati Hansraj (verified owner) –
The item and the design are very cool. Also the support is amazing, they always help you with any detail that you have.
Chirag Chaturvedi (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Farookh Agarwal (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Sumit Bhatt (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Kumari Selja (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Santosh Saxena (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Aruna Jain (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Sivata ben (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Jagadish Prasad (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
SanjeevBallan (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Paramjit Sandhu (verified owner) –
Manojj Kohli (verified owner) –
Gunav Pandey (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Satish Ganguly (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Dipti Sharma (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Shaarad Kapoor (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Sarasvati Verma (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Dharmendra kaur (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Manju Kumari (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Dhir Mishra (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Krsna Singh (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Mahesh Mishra (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Bhavika Saxena (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Ashutosh Jha (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
SundariKohli (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Puja Mishra (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Devdan Apte (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Lala Sinha (verified owner) –
MarutiMehta (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Lavanya Sharma (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Aatreya Garg (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Aswad Chaturvedi (verified owner) –
Gayatri Shastri (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Shakeela Mishra (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Ranjana Ganguly (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Akshay Goel (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Joseph (verified owner) –
Malati Gaikwad (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Taara Garg (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Sachin Kumar (verified owner) –
Dipili Shinde (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Amarjaa Rawat (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Vipin Kishore (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Sujata Iyer (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Aakav Rawat (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Pinki Sen (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Ramkali Asif (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Nilesh hudda (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Nihal Sethi (verified owner) –
Very nice machine. With Lightburn very easy to work with it.