Glass Clamp for heated bed pack of 4pcs
₹199.00 Incl.GST / ₹168.64 Excl.GST
100% brand new and high quality.
Made of stainless steel material, sturdy and durable, long time to use.
Suitable for Ultimaker 2 glass heated bed.
Great replacements for 3D printer parts.
Material: 0.5mm Stainless Steel
Clamping thickness: 6mm
Hole spacing: 25mm
| Brand | |
|---|---|
| Condition | |
| HSN Code |
✓Low Stock. Order Now !
14 in stock
14
People watching this product now!
Description
Description
Clamps to clamp the glass onto the heated bed of a 3D printer. These stainless steel clamps are designed to clamp a sheet of glass onto a heated bed while undergoing a lot of temperature fluctuations. The clamps are designed to clamp onto a 6mm thick piece of material, so if your heated bed is 3mm thick, then a 3mm thick glass will work 100%. The clamp can be mounted with 2 screws from the bottom to fix the clamp or one screw can be used to be able to open the clamp or no screws can be used to be able to remove the clamp completely. This makes the clamp very versatile.
- Compatible Models — Glass bed spring clamp is compatible with for Cre En 3 Pro, for En 3 V2, for En 3S, for En 5 Pro, for CR-20 PRO 3D printers and other 3D printers
- Stainless Steel — The bed clip is made of stainless steel, which is not easy to rust and has a long service life, so there is no need to worry about the quality of the parts
- Stable and Firm — These stainless steel clips have good stability and firm fixation, so you can use them with confidence .
- Convenient and Fast — The glass bed clip is easy and convenient to use, if your platform is a 3mm thick aluminum bed and a 4mm glass bed, you can directly clip the clamp without other tools
- Easy to Install –The clip is easy to install with good fixation; 16 pieces of glass bed clips are easy to use, you will have a good experience.
Package List: 1 x 3D Printer Hot Bed Clips pack of 4pcs
Reviews (36)
36 reviews for Glass Clamp for heated bed pack of 4pcs
Clear filters
About brand
TwoTrees is one of the biggest producer of 3d printer and accessories in China, today comprises R&D, Produce, and Retailing; that creates high-quality products. It is a technology company present in all four major sectors of the 3Dprinter market: 3D Printers, Laser engravers, Spare parts & accessories and filaments.
TwoTrees currently employs over 200 people across the world and reported sales of 10 million dollars in 2021. Over these years, TwoTrees has carefully preserved and enhanced consumer experience by resolutely focusing on the quality of their products and services. Vertical integration across the value chain cultivates this excellence both upstream and downstream, from sourcing of the finest raw materials to production and worldwide retailing. This model guarantees the excellence of our products over time.
We are every bit as uncompromising about our ethics and our underlying social and environmental responsibilities. TwoTrees has always been strongly committed to ethical behavior and insists on integrity in all our activities and relations, whether with employees, partners or other stakeholders.
Related products
CR10 Ender 3 Special 4.1mm Throat Bowden Tube Long Thread For 1.75 mm Filament for 3D printer
In stock
₹150.00 Incl.GST / ₹127.12 Excl.GST
Brass volcano Teflon coated Hot End Nozzle Scratch Proof nozzle 0.4mm
In stock
₹245.00 Incl.GST / ₹207.63 Excl.GST
Teflon Coated Nozzle 0.4mm for 3D Printer E3D V6 Hotend
In stock
₹230.00 Incl.GST / ₹194.92 Excl.GST
Thermistor 100k NTC with 1 Meter Cable Temperature Sensor No connector
In stock
₹100.00 Incl.GST / ₹84.75 Excl.GST
Heatbed Adjustment M3 Screw with Spring
In stock
Original price was: ₹179.00.₹129.00Current price is: ₹129.00. Incl.GST / ₹109.32 Excl.GST
3D printing wireless router ESP8266 WIFI module MKS Robin-WIFI V1.0 APP remote control for MKS Robin mainboard high stability
In stock
₹890.00 Incl.GST / ₹754.24 Excl.GST
USONGSHINE 3D Printer Cooling Fan 4020 DC 24V/12V/5V Brushless Cooling Fan with 2Pin Wire Mini Fan for 3d Printer Parts – 24V DC
In stock
₹230.00 Incl.GST / ₹194.92 Excl.GST
USONGSHINE 3D Printer Cooling Fan 4010 DC 24V/12V/5V Brushless Cooling Fan with 2Pin Wire Mini Fan for 3d Printer Parts – 24V DC
In stock
₹200.00 Incl.GST / ₹169.49 Excl.GST
USONGSHINE 3D Printer Cooling Fan 4010 DC 24V/12V/5V Brushless Cooling Fan with 2Pin Wire Mini Fan for 3d Printer Parts – 12V DC
In stock
₹190.00 Incl.GST / ₹161.02 Excl.GST
USONGSHINE 3D Printer Cooling Fan 5010 DC 24V/12V/5V Brushless Cooling Fan with 2Pin Wire Mini Fan for 3d Printer Parts – 12V DC
In stock
₹200.00 Incl.GST / ₹169.49 Excl.GST
V6 Heat Break Hotend Throat With Teflon Tube for 1.75mm Filament
In stock
₹150.00 Incl.GST / ₹127.12 Excl.GST
4.1 through hole throat M6*30MM stainless steel pipe for 3D printer
In stock
₹150.00 Incl.GST / ₹127.12 Excl.GST
MK8 Clone CHT Brass Nozzle 1.75/0.4mm M6 high flow for 3d Printer part
In stock
₹300.00 Incl.GST / ₹254.24 Excl.GST
Bambu lab cht nozzle size 0.4mm brass nozzle for Bambu Lab X1 and P1P for 1.75 Filament
In stock
₹350.00 Incl.GST / ₹296.61 Excl.GST
New Upgraded Aluminium V6 Official Heat Block 23*16*11 mm For E3D V6 PT100 J-head Extruder
In stock
₹240.00 Incl.GST / ₹203.39 Excl.GST
Volcano Heated Silicone Block aluminum 20*20*12mm for 3D Printer
In stock
₹220.00 Incl.GST / ₹186.44 Excl.GST
Twotrees PEI Sheet Double Side Textured Smooth PEI Bed Flexible Magnetic Spring Steel Print Bed Plate – 310*310 – 235*235
In stock
₹1,999.00 Incl.GST / ₹1,694.07 Excl.GST
Twotrees Double Sided PEI Spring Steel Sheet Magnetic Heated Bed (Textured+PEI) – 310*310
In stock
₹2,299.00 Incl.GST / ₹1,948.31 Excl.GST
Twotrees Double Sided PEI Spring Steel Sheet Magnetic Heated Bed (Textured+PEI) – 305*305
In stock
₹2,299.00 Incl.GST / ₹1,948.31 Excl.GST
Twotrees Double Sided PEI Spring Steel Sheet Magnetic Heated Bed (Textured+PEI) – 255*255
In stock
₹2,199.00 Incl.GST / ₹1,863.56 Excl.GST
Hardened Steel Extruder Print Nozzle M6 0.4mm For 3D Printer E3D 1.75mm
In stock
₹299.00 Incl.GST / ₹253.39 Excl.GST
Cold Water Milling Pipe Fine Workmanship Stainless Steel Throat For Printing
In stock
₹199.00 Incl.GST / ₹168.64 Excl.GST
Red Optical Limit Switch Module with White 0.5m Wire for 3D Printes and Mini CNC
In stock
₹129.00 Incl.GST / ₹109.32 Excl.GST
Upendra Kuswaha (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Parvin Sundar (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Kuldeep dedha (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Kamlesh Kohli (verified owner) –
Shri Mani (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Ananta Singh (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Manjula Achari (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Dinesh Mehta (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Devi Rawat (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Meena Chadha (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
UsaNegi (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Venkata Zacharia (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Devahuti Shinde (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Sangeeta Sachdeva (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Santu Sinde (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Gambhira Shinde (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Devansh Jha (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Chandranshu Chaturvedi (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Viksya Chadha (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Sunil Desai (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Surekha Sharma (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Rachanna Gupta (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Valin Rawat (verified owner) –
Anshu Rawat (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Nagaraju Iyengar (verified owner) –
Sharda Sastry (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Muhammad Alamgir (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Prasanta Mishra (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Lalit Mehta (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Mahesh (verified owner) –
Rama devi (verified owner) –
Dinesh Jain (verified owner) –
Syed Afroz (verified owner) –
Tapan Ghosh (verified owner) –
Abhishek Sharma (verified owner) –
Ehan Mishra (verified owner) –