XTOOL
IKIER
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
D Series
Air Assist Set
Honeycomb Panel Set
Extension Kit
Motheboard
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
SCULPFUN SF-A9
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Brass volcano Teflon coated Hot End Nozzle Scratch Proof nozzle 0.4mm
₹245.00 (Incl. GST)
- SMOOTHLY WORKING: The inner hole of the nozzle is smoothly, not easy to be blocked, and will not affect the printing. Strict craftsmanship,nozzle strictly follows making standard, Greatly extend its service life.
- WIDE COMPATIBILITY: 0.4mm specification, used for 1.75mm filament, this nozzle is suitable for most 3D printing hot ends on the market. Can quickly flatten the filament that achieving improve the stability of the entire nozzle and print quality.
- HIGH TEMPERATURE RESISTANCE: The black coating can withstand temperatures up to 300°C, provides higher working performance.
- PREMIUM BRASS MATERIAL: Forged with premium brass material, with better thermal conductivity, the is sandblasted for longer life. they are very flexible pliable and tough, perfect to handle tough extruder hot end nozzle clogs.
- PTFE COATING: The is coated with PTFE, not easy to be scratched, can effectively inhibit the adhesion of filament. Precise Design,Cutting with the 3D Printer Hotend Nozzle, make the contact surface more flat, so it can prevent printhead from leakage effectively and avoid nozzles clogging.
In stock
In stock
Check Estimated Delivery at
Shipping to IN
20
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
- SMOOTHLY WORKING: The inner hole of the nozzle is smoothly, not easy to be blocked, and will not affect the printing. Strict craftsmanship,nozzle strictly follows making standard, Greatly extend its service life.
- WIDE COMPATIBILITY: 0.4mm specification, used for 1.75mm filament, this nozzle is suitable for most 3D printing hot ends on the market. Can quickly flatten the filament that achieving improve the stability of the entire nozzle and print quality.
- HIGH TEMPERATURE RESISTANCE: The black coating can withstand temperatures up to 300°C, provides higher working performance.
- PREMIUM BRASS MATERIAL: Forged with premium brass material, with better thermal conductivity, the is sandblasted for longer life. they are very flexible pliable and tough, perfect to handle tough extruder hot end nozzle clogs.
- PTFE COATING: The is coated with PTFE, not easy to be scratched, can effectively inhibit the adhesion of filament. Precise Design,Cutting with the 3D Printer Hotend Nozzle, make the contact surface more flat, so it can prevent printhead from leakage effectively and avoid nozzles clogging.
Nozzle Hole: 0.4mm
Specification: 1.75mm Filament
Thread: 6mm (M6)
Length: 21mm
Package Include :
1*Brass volcano Teflon coated Hot End Nozzle
48 reviews for Brass volcano Teflon coated Hot End Nozzle Scratch Proof nozzle 0.4mm
Clear filters
TwoTrees is one of the biggest producer of 3d printer and accessories in China, today comprises R&D, Produce, and Retailing; that creates high-quality products. It is a technology company present in all four major sectors of the 3Dprinter market: 3D Printers, Laser engravers, Spare parts & accessories and filaments.
TwoTrees currently employs over 200 people across the world and reported sales of 10 million dollars in 2021. Over these years, TwoTrees has carefully preserved and enhanced consumer experience by resolutely focusing on the quality of their products and services. Vertical integration across the value chain cultivates this excellence both upstream and downstream, from sourcing of the finest raw materials to production and worldwide retailing. This model guarantees the excellence of our products over time.
We are every bit as uncompromising about our ethics and our underlying social and environmental responsibilities. TwoTrees has always been strongly committed to ethical behavior and insists on integrity in all our activities and relations, whether with employees, partners or other stakeholders.
More Products
Aluminum Flexible Spider Shaft Jaw Coupling D20L25
In stock
₹499.00 (Incl. GST)
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
MOHD0026
Twotrees 10mm Smooth Rod
In stock
₹249.00 – ₹990.00 (Incl. GST)
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
MOSMR-10-7G
Floating Milk Cup Mug, Kitchen Decor items, Dining Table decor, Home decor Decorative Showpiece – 11.5 cm (Plastic, White, Brown)
In stock
₹599.00 (Incl. GST)
SKU:
Floating Cup
M6 X 30mm 1.75mm Filament Stainless Steel Throat with PTFE Teflon Tube for 3D Printer Extruders
In stock
₹199.00 (Incl. GST)
SKU:
110101604
Radial Ball Bearing for 3D Printer
In stock
₹50.00 – ₹99.00 (Incl. GST)
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
MO-RBBM
Uma Kumari (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Eravati Sinde (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Gurpreet Sharma (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Sima (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Umesh Kapoor (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Surajit Jha (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Pradip Saxena (verified owner) –
Chandrima Gupta (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Ajanabh Rawat (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Sujay Narayan (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Aanan Agarwal (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Rima Jha (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Ratan Lal (verified owner) –
Trilochan Kapoor (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Bimla Devi (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Prabhakar Bansal (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Adheesha Rawat (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Rajswaroop Kohli (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Caturnana Agarwal (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Sumana Jaiswal (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Chameli Gupta (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Gunav Pandey (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Nirmala (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Banita Mishra (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Gudiya Mittal (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Kirani Agarwal (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Prateek Karthick (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Nameen Bansal (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Amitabh Parihar (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Mithalesh Ghosh (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Sakina Khan (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Hemlata Sharma (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Shylah Goel (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Bharat Daggar (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Nanda Ghosh (verified owner) –
Sila Bansal (verified owner) –
Anusaya Pandey (verified owner) –
Lala Sinha (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Devraj Rawat (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Nayantara Jaiswal (verified owner) –
Sachin Kumar (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Baburam Kohli (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Kalynda Mishra (verified owner) –
Chandravti Das (verified owner) –
Paramar Bansal (verified owner) –
Niraj Sastry (verified owner) –
Janesh Bansal (verified owner) –
Alok Sharma (verified owner) –