XTOOL
IKIER
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
xTool F1
XTool P2
xTool D1 Pro 40W + 10W Kit
xTool D1 Pro
xTool M1
Air Assist Set
Honeycomb Panel Set
Extension Kit
Motheboard
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
New! SCULPFUN S30 Ultra
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
MK8 Long M6 Throat with Teflon Tube 6*30mm Stainless Steel Thread Longer Feeding Part 1.75mm Filament
₹199.00 Incl GST (₹168.64 +18%GST)
Pneumatic Connector PC4-01 PC4-M6 for 3D Printer
₹89.00 – ₹100.00
Cold Water Milling Pipe Fine Workmanship Stainless Steel Throat For Printing
₹199.00 Incl GST (₹168.64 +18%GST)
Stainless Steel: 3D printer accessories, feeding cold water milling throat pipe multi nozzle extrusion printing stainless steel feed pipe.
Prevent Material Leakage: Cold water milling pipe can be tightened with a wrench to prevent material leakage during printing.
Abrasion Performance: 3D printer accessories are made of stainless steel, abrasion performance and durable, and have a long service life.
Lightweight and Portable: Stainless steel throat is light in weight, small in size, easy to carry and store, convenient and fast, and stable in performance.
In stock
In stock
Check Estimated Delivery at
Shipping to IN
11
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
- [Lightweight and Portable] Stainless steel throat is light in weight, small in size, easy to carry and store, convenient and fast, and stable in performance.
- [Abrasion Performance] 3D printer accessories are made of stainless steel, abrasion performance and durable, and have a long service life.
- [Prevent Material Leakage] Cold water milling pipe can be tightened with a wrench to prevent material leakage during printing.
- [Stainless Steel] 3D printer accessories, feeding cold water milling throat pipe multi nozzle extrusion printing stainless steel feed pipe.
All Metal Stainless Steel Heatbreak Throat for 3D Printer Accessories
Features: brand new and
All metal heat break for
Durable and stable
for 1.75 4.1mm Filament Hot ends.
General Installation external thread connection.
It is an important accessories for 3D printers.
Specifications: Material:Stainless Steel
for: 1.75 4.1mm Filament Hot ends
Package Includes:
1* Cold Water Milling Pipe Fine Workmanship Stainless Steel Throat For Printing
15 Days Warranty
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Mechblock customers from any kind of manufacturing defects. Â Reimbursement or replacement will be done against manufacturing defects.
What voids warranty:
If the product is subject to misuse, tampering, static discharge,mishandelling of the product, accident, water or fire damage, use of chemicals & soldered or altered in any way.
50 reviews for Cold Water Milling Pipe Fine Workmanship Stainless Steel Throat For Printing
Clear filters
TwoTrees is one of the biggest producer of 3d printer and accessories in China, today comprises R&D, Produce, and Retailing; that creates high-quality products. It is a technology company present in all four major sectors of the 3Dprinter market: 3D Printers, Laser engravers, Spare parts & accessories and filaments.
TwoTrees currently employs over 200 people across the world and reported sales of 10 million dollars in 2021. Over these years, TwoTrees has carefully preserved and enhanced consumer experience by resolutely focusing on the quality of their products and services. Vertical integration across the value chain cultivates this excellence both upstream and downstream, from sourcing of the finest raw materials to production and worldwide retailing. This model guarantees the excellence of our products over time.
We are every bit as uncompromising about our ethics and our underlying social and environmental responsibilities. TwoTrees has always been strongly committed to ethical behavior and insists on integrity in all our activities and relations, whether with employees, partners or other stakeholders.
More Products
1 Watt 6 Volt Polycrystalline Solar Cell Panel Module
In stock
Original price was: ₹750.00.₹570.00Current price is: ₹570.00. Incl GST (₹483.05 +18%GST)
SKU:
MB-PSCP
4 Digit PC ISA PCI Analyzer Diagnostic Test Post Card
In stock
₹1,699.00 Incl GST (₹1,439.83 +18%GST)
SKU:
4D-ADTPC
ACME Nut Plate For 8mm/4mm/2mm Lead Screw TR8*8/TR8*4/TR8*2
In stock
₹227.00
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
MONUTPLATE-TR-2I
Water Cooling Radiator for Computer CPU
In stock
₹1,999.00 Incl GST (₹1,694.07 +18%GST)
SKU:
CPU-REDI
Kimaya Goel (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Atharv Jaiswal (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Marjane Parihar (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Chandan Dhawal (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Kavita Pandey (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Uma (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Manohar Babu (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Jyothi Krisnan (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Shankar Pandey (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Prabhavti Trivedi (verified owner) –
Nagamani Iyer (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Anita Kapoor (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Hanita Shinde (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Angayarkanni Verma (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Ashok Saxena (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Nagina Begum (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Dayaram Shinde (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Udayan Agarwal (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Asmee Grover (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Pritam Desai (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Mitra Karthick (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Chetan Jha (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Mala Dewan (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Vaishali Yadav (verified owner) –
Vijendra Kansal (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Charudatta Gupta (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Balraj Rawat (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Ajanabh Rawat (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Saurabh Desai (verified owner) –
Kalinda Anand (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Devaki Ganguly (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Bodhi Chaturvedi (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Siyaram Kashyap (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Sajan Mishra (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Ranjana Ganguly (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Lila ben (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Vishwanath Kumar (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Basavaraja (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Chandrakant Gupta (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Lakshmi devi (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Chirag Chaturvedi (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Ghoshhrath Pandey (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Kaia Grover (verified owner) –
Ananda Pandey (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Chhaya Mittal (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Anand Goel (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Palana Saini (verified owner) –
Bhuma Rawat (verified owner) –
Vitthal Iyengar (verified owner) –
Chayan Chaturvedi (verified owner) –