XTOOL
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
D Series
xTool SafetyPro™ AP2 Air Purifier
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
SCULPFUN SF-A9
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
₹121.00 Incl.GST / ₹102.54 Excl.GST
• The Xtreme Mini Wheel is part of the heavy duty Xtreme line of parts, designed with strength in mind.
• These Xtreme Mini V’s are made from very hard poly-carbonate (clear) material which, due to its strong nature, will resist compression and wear and, in turn, leads to better overall precision and strength for your builds.
In stock
In stock
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Description
The Xtreme Mini Wheel is part of the heavy duty Xtreme line of parts, designed with strength in mind.
These Xtreme Mini V’s are made from very hard poly-carbonate (clear) material which, due to its strong nature, will resist compression and wear and, in turn, leads to better overall precision and strength for your builds.
The Xtreme Wheels are designed to be used as a heavy duty alternative to the Delrin Wheels in applications such as CNC Routers/Mills where force and weight are introduced into the system. So, while the Delrin Mini V Wheels work great for most light load applications the Xtreme Mini Wheels can be used for builds where heavier loads are required and less compression in the delrin is desired.
Many of these wheels could be added to a gantry to allow an even distribution of the load across them.
These wheels are individually milled for consistent high precision and tolerance.
Included:
1 x Mini Xtreme Wheel
1 x M5 Nylon Lock Nut
2 x Mini V Bearings
2 x Mini V 1mm Precision Shim
The Xtreme Mini V Wheel is great for use with the V-Slot Linear Guide System.
Specifications:
Model: VK0006
Material – Polycarbonate (clear)
Dimensions 15.23 OD x 9.974 +/- 0.026 ID x 8.8 ‘thick’
Rockwell Hardness M 75
Compressive Strength 86 Mpa
Note: The Mini Shim is placed in-between the two bearings. To assemble, first push one bearing into the wheel. Then using the screw as a guide push the Mini Shim and 2nd bearing into the other side of the wheel.
Additional information
| Brand | |
|---|---|
| Condition | |
| HSN Code | |
| Kit |
45 reviews for 6 in 1 Xtreme Mini V Wheel Kit
Clear filtersMore Products
Pen Candy Makeup Brush Skull holder 3D printed Skull – Red
In stock
ACME Nut Block
In stock
xTool S1 Enclosed Diode Laser Cutter – Black, Basic Bundle
In stock
Dilip Apte (verified owner) –
Think everyone should know about this, it’s just beyond my expectations
Baldev Chopra (verified owner) –
I like this item and also the customer service of them.
Vijna Chadha (verified owner) –
Great item! It provides too many things compared to its price charged.
Balaram (verified owner) –
Thank you guys for this amazing creation! Absolutely mind-blowing!
Dhheiba Apte (verified owner) –
Quite easy to use, nice design, surely will buy again
Sohan rghav (verified owner) –
Quite easy to use, nice design, surely will buy again
Kundan Ballan (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Viaan Goswami (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Baldev Gupta (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Akarsh Garg (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Ananta Chauhan (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Dayanita Shinde (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Mousumi Sinha (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Shyamali Surat (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
UsaNegi (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Dipika Grover (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Vandana Chawla (verified owner) –
Campaben Desai (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Sangitaben Mehta (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
NasimaJyoti (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Nila Goswami (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Smriti Bansal (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Barir Jaiswal (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
VasantBisnoi (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Sahil Kapoor (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Laxman Balakrishna (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Sony Narayan (verified owner) –
Nand Kumar (verified owner) –
Anirudh Garg (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Sonu Bansal (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Ananda Sachdeva (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Aahan Garg (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Anala Iyengar (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Jasleen Parihar (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Gangadhar Jain (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Amul Verma (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Dhirendra Soni (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Sankar jaiswal (verified owner) –
Murukan Rao (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Ramu Sharma (verified owner) –
Pappu jain (verified owner) –
Sayujya Mallhotra (verified owner) –
Amit (verified owner) –
MithunIyer (verified owner) –
Babita Kansal (verified owner) –