XTOOL
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
D Series
xTool SafetyPro™ AP2 Air Purifier
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
SCULPFUN SF-A9
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
₹98.00 Incl.GST / ₹83.05 Excl.GST
• The Solid V Wheel is a strong wheel that resists deflection due to its solid nature.
• Solid V Wheel is suitable for builds where heavier loads are required and less compression in the delrin is desired.
• Using a Solid V Wheel and V-Slot you can build a gantry for CNC/3D Printer to allow an even distribution of the load across them.
• This product is Compatible, Suitable for V-Slot and T-Slot Assemblies
In stock
In stock
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Description
The Solid V Wheel is a strong wheel that resists deflection due to its solid nature.
This wheel style was produced for two reasons.
— First is for builds where heavier loads are required and less compression in the delrin is desired. Many of these wheels could be added to a gantry to allow an even distribution of the load across them.
— Second is for improved performance of the belt and pinion system to give the belt a flat surface to ride on. These wheels are individually milled for consistent high precision and tolerance.
Model: VK0001
Material: POM
Size: 10.2 x 23.9 mm
Included
1 x Solid V Wheel
2 x Ball Bearings – 625 2RS
2 x 5 mm Precision Shim
1 x Lock Nut with Nylon Insert
The Solid V Wheel is great for use with the V-Slot Linear Guide System.
Note: The precision shims are placed in-between the two bearings. To assemble, first push one bearing into the wheel. Then using the screw as a guide push the 2 precision shims and 2nd bearing into the other side of the wheel.
More Products
Aluminum Flexible Jaw Spider Shaft Coupling D25L30
In stock
C-Beam Linear Actuator Kit with motor Assembled
In stock
GT2 30 Teeth Pulley Timing Belt – Belt Width 6mm/10mm
In stock
xTool M1 Ultra 10W: The World’s First 4-in-1 Craft Machine – Advance Bundle
In stock
Indu Jha (verified owner) –
It’s far better than those similar products, while the price is still acceptable.
Deepa Bansal (verified owner) –
Great item! It provides too many things compared to its price charged.
Dayanand Shinde (verified owner) –
I think this is amazing. Lots of features and customizable from every point of view. The few times I asked for help in support they were competent, fast and above all very patient. Really recommend
Store manager mechblock –
Your kind words just made our days! Thank you so much!
Faisal Sheikh –
Fast Delivery
Rajamma (verified owner) –
An awesome product with great flexibility. The customer support is superb. I recommend this without any doubt.
Store manager mechblock –
Thank you for your kind recognition, customer’s satisfaction is always our goal.
Deccan Shinde (verified owner) –
I want to say thanks to the support team for helping with my continuously silly questions, you’re the best!
Store manager mechblock –
We’re glad you are satisfied with our item! Will do our best to keep improving it in the future.
Aayod Pandey (verified owner) –
Thank you guys for this amazing creation! Absolutely mind-blowing!
Marjane Parihar (verified owner) –
It’s far better than those similar products, while the price is still acceptable.
Jayanta Singh (verified owner) –
Quite easy to use, nice design, surely will buy again
Anita Mallhotra (verified owner) –
I think this is amazing. Lots of features and customizable from every point of view. The few times I asked for help in support they were competent, fast and above all very patient. Really recommend
Sukhdev Bisnoi (verified owner) –
I rarely leave a comment, but this item is beyond worth it! Gotta let you guys know!
Mina Jindal (verified owner) –
The item and the design are very cool. Also the support is amazing, they always help you with any detail that you have.
Vinita Patil (verified owner) –
This is the best support for a product I had so far, they reply quickly and solve themselves the problems most of the time. Kudos guyz
Satyavathi Anand (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Ainal Pandey (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Sanatan Sharma (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Milan Sharma (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Saroja Singh (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Dhavala Apte (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Hirabai Jaiswal (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Dhruv Patel (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Ivaan Pandey (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Prabhavti Trivedi (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Indira Bansal (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Anitha Joshi (verified owner) –
Devaj Patel (verified owner) –
Kireesna Jyoti (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Patal Sinha (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Patal Jha (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Rinki Goswam (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Akhilendra Rawat (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Gangabai Joshi (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Annapurna Kansal (verified owner) –
Adheesha Bisht (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Durga Rawat (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Yajin Chadha (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Amina Ansari (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Aakesh Rawat (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Pavan Sethi (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Darshan Kripal (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Charu Goel (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Ramakant Dwivedi (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Tulsi Garg (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Nilam Rani (verified owner) –
varun Sood (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Shaila Goel (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Mahit Dwivedi (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Ramila ben (verified owner) –
Citra Jain (verified owner) –
Ubena Hussain (verified owner) –