XTOOL
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
Apparel Printer
MetalFab
xTool SafetyProâ„¢ AP2 Air Purifier
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
iCube Series
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Showing 1–20 of 37 resultsSorted by popularity
TOOLS FOR WORKING IN THE HAND, PNEUMATIC, HYDRAULIC OR WITH SELF-CONTAINED ELECTRIC OR NON-ELECTRIC MOTOR – OTHER TOOLS: OTHER: OTHER
DRV8825 Stepper Motor Driver
In stock
₹230.00 Incl.GST / ₹194.92 Excl.GST• Supply Voltage: 8.2 – 42 VDC.
• Current Capacity: 2.2A max (24V).
• Continuous current per phase: 1.5 A.
• Minimum Logic voltage: 2.5V.
• Maximum Logic Voltage: 5V.
• Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
NEMA 23 Stepper Motor Holding Turque 2.45N.m
In stock
₹2,999.00 Incl.GST / ₹2,541.53 Excl.GSTThese NEMA 23 stepper motors is a great choice for any project.
With an all black body, these motors also look fantastic!
• Step Angle：1.8°
• Rated current：3.0A DC
• Rated Voltage: 3.6V
• Winding dc resistance (25℃): 1.2Ω±10%
• Winding inductance: 4mH±20%
• Holding torque：≥2.45N.m
• Shaft diameter: 6.35mm or 1/4″
10Pcs HSS 4 Flute Milling Cutter 1.5-6mm End Mill Tool Set
In stock
₹2,029.00 Incl.GST / ₹1,719.49 Excl.GST• 10Pcs HSS 4 Flute Milling Cutter 1.5-6mm End Mill Tool Set Straight Shank Router Bit CNC Tools for Wood Metal Engraver Mill
IR Remote Control Extension Cord Cable
In stock
₹449.00 Incl.GST / ₹380.51 Excl.GST• Power: 5V ( Home appliance USB or 5V power supply )
• Carrier frequency: 38KHZ
• Peak wavelength: 940NM
• Receiving distance: 18-20M
• Launch distance: 18-20M
• Cable length from USB to receiver: approx. 1.4 M
USONGSHINE Nema 17 17HS8401S Stepper Motor for CNC 3D printer
In stock
₹949.00 Incl.GST / ₹804.24 Excl.GST• Pitch angle: 1.8°
• Rated current: 1.5A
• Holding torque: 40Ncm
• Step angle accuracy: + – 5% (full step, no load)
• Resistance accuracy: + – 10%
• Inductance accuracy: + – 20%
• Ambient temperature –> 20deg ~+50deg
• Insulation resistance: 100M Min, 500VDC
• Insulation resistance –> 500VAC for one minute
Two Trees TMC2209 V2.0 Stepper Motor Driver Module
In stock
₹700.00 Incl.GST / ₹593.22 Excl.GSTVersion: TMC2209 V2.0
Input Voltage range: 5.5V-28V
Maximum current: 2.5A
Logic Voltage: 3.3V-5V
MicroStep: upto 1/256
ESP32 38Pin Development Board WiFi+Bluetooth Ultra-Low Power Consumption Dual Core
In stock
Original price was: ₹550.00.₹430.00Current price is: ₹430.00. Incl.GST / ₹364.41 Excl.GSTHigh performance-price ratio
Small volume, easily embedded in other products
Strong function with support LWIP protocol, Freertos
Supporting three modes: AP, STA, and AP+STA
Supporting the Lua program, easy to develop
2 Position 2.54mm Female Jumper / Shunt Socket Pack of 10pcs
In stock
₹99.00 Incl.GST / ₹83.90 Excl.GST• Open Top jumper socket or shunt – Black housing
• High Force, Single Operation.
• Alternative programming method to DIP switches
• Current Rating: 1A
• Operating Temperature: -40℃ to 85℃
USONGSHINE Nema 17 17HS6001S Stepper Motor for CNC 3D Printer
In stock
₹1,499.00 Incl.GST / ₹1,270.34 Excl.GSTCompact stepper motor adhering to NEMA17 industry standards for a standardized frame size.
Operates in a two-phase configuration with four leads, facilitating precise control and movement.
Typically features a standard step angle, such as 1.8 degrees per step.
Utilizes a hybrid design incorporating features of both permanent magnet and variable reluctance technologies.
AT-09 Bluetooth 4.0 UART Transceiver Module CC2541 Compatible with HM-10
In stock
₹280.00 Incl.GST / ₹237.29 Excl.GSTUltra-low standby power consumption 90uA~400uA
Range up to 60 meters
Built-in PCB antenna
Power input : 3.6v to 6v DC (6v MAX)
Non-Destructive MP3 Decoding Board with Self-Powered TF Card U Disk Decoded Player Module
In stock
Original price was: ₹135.00.₹100.00Current price is: ₹100.00. Incl.GST / ₹84.75 Excl.GSTSupport MP3 format, playing power on automatically.
When mp3 is played the red LED flashes.
Support U disk (test 32G), TF Card (test 16G) play mode;Â power on default.
Buttons can be adjusted up and down to control songs, volume up and down, pause or play, and mode switching.
Press the menu button and enter the single / all-song play mode.
0.5-3mm Drill Bits Shank Metal Drill Chuck Collet Bits Rotary Set
In stock
₹150.00 Incl.GST / ₹127.12 Excl.GST• Material: Brass
• Compatible with RS-555 motor
• Drill Collet Size: 0.5mm, 1.0mm, 1.5mm, 2.5mm, 3.0mm
• 0.5-3.0mm drill collet
• Diameter: 2.3mm
• Application: ABS, Aluminium, PCB drilling
Mega 2560 ATmega2560-16AU Board without USB Cable
In stock
Original price was: ₹1,479.00.₹1,099.00Current price is: ₹1,099.00. Incl.GST / ₹931.36 Excl.GST• 54 digital input / output terminals (14 of which have programmable PWM outputs).
• 16 analog inputs.
• 4 UARTs (hardware serial ports).
• 16 MHz crystal clock.
• Operating voltage: 6 ~ 12v.
CNC Shield V4.0 3-Axis Stepper Motor Drive Board
In stock
Original price was: ₹240.00.₹190.00Current price is: ₹190.00. Incl.GST / ₹161.02 Excl.GST• Compatible with a micro-drive laser engraving machine, three-axis CNC engraving machine.
• 2A can be controlled within the two-phase four-wire stepper motor.
• Power DC5V interface, 7.5-12V voltage input.
• GRBL compatible.
• Worked with Arduino nano.
Heart Rate Monitor Kit with AD8232 ECG sensor module
In stock
Original price was: ₹579.00.₹429.00Current price is: ₹429.00. Incl.GST / ₹363.56 Excl.GST• Designed to extract, amplify, and filter small biopotential signals.
• Leads-Off Detection.
• Shutdown Pin.
• LED Indicator.
• Analog Output.
• 3.5 mm Jack for Biomedical Pad Connection.
USONGSHINE Nema 17 17HS3401 Stepper Motor for CNC 3D Printer – 17HS3401S
In stock
₹650.00 Incl.GST / ₹550.85 Excl.GSTModel: 17HS3401S
TWOTREES A4988 Stepper Motor Driver Module with Heat Sink
In stock
₹99.00 Incl.GST / ₹83.90 Excl.GSTModel- A4988 Stepper Motor Driver
Voltage Supply- 3.3 and 5V
Weight- 5 grams
Color- Red
Twotrees MKS WIFI Robin V1.0 ESP-12S ESP8266
In stock
₹900.00 Incl.GST / ₹762.71 Excl.GSTAuto search hotspot after power-on,connect hotspot directly by the screen.
RepetierHost/pronterface remote control instead of usb.
With “MKS Plugin”(developed by makerbase for cura),cura remote control and transfer files(100kb/s).
PC or mobile phone’s browser remote control and transfer files.(developing…)
With “MKS CLOUD”APP (developed by makerbase), user can control and monitor 3d printer in other city.
Twotrees A4988 Stepper Motor Driver Module Green PCB
In stock
₹190.00 Incl.GST / ₹161.02 Excl.GSTSupply Voltage : 8-35 VDC.
Current : 1.0A Â (no heatsink ).
Current : 2.0A (with heat-sinking).
logic input : 3 – 5.5V .
Automatic current decay mode detection / choice.
Mixed with slow current decay mode.
2 x 2 Matrix 4 Push Button Keyboard Module
In stock
₹45.00 Incl.GST / ₹38.14 Excl.GST2×2 Matrix Keyboard Module with 4 buttons
Small in size and hence Save space
More convenient to use
Expanded development application modules for single chip
With 4 keys and 4 pin
NOTE: Color might be different from given image.
