XTOOL
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
D Series
xTool SafetyPro™ AP2 Air Purifier
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
SCULPFUN SF-A9
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Showing 101–120 of 723 resultsSorted by popularity
Male to Female Jumper Cable – 2.45mm L30cm
Out of stock
₹176.00 Incl.GST / ₹149.15 Excl.GST• This is Male to Female Dupont Line 40 Pin 30cm. A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has 1Pin female to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers.
ACME Nut Plate For 8mm/4mm/2mm Lead Screw TR8*8/TR8*4/TR8*2
In stock
₹227.00• This ACME Nut Plate is a perfect fit for any integrated acme screw transmission project.
• It can fit into the hollow inserts of 20×40, 20×60 or 20×80 V-Slot.
Openbuilds CNC Jog Knob handwheel for T8 screw
In stock
₹399.00 Incl.GST / ₹338.14 Excl.GST• Used this Jog Knob to fine tune your machine’s position.
• Simply attach the jog knob to the 8mm Acme Lead Screw and tighten using the included M4 set screws.
Slot Washer
In stock
₹15.00 Incl.GST / ₹12.71 Excl.GST• These Slot Washers can be used to bridge the V-Slot to allow for mounting of various components, they can also be used elsewhere on your machine.
L Type Belt Mount Plate
In stock
₹99.00 Incl.GST / ₹83.90 Excl.GST• This Belt Mount Plate L Type gives an easy way to attach the ends of an open ended belt to V-Slot or other T-Slot extrusion.
• The belt is wrapped through the slots and over itself like a typical back pack strap.
V-Slot Micro Limit Switch Plate
In stock
₹299.00 Incl.GST / ₹253.39 Excl.GST• Use these plates to mount micro limit switches to V-Slot or compatible extrusion.
• Provide multiple ways to mount and arrange your switches adjustable along the length of the extrusion.
• Adjustments are made with just one screw to allow for quick and precise switch engagement.
• They are super easy to use and there are many examples to use in the included model.
• There are 4 threaded M3 mounting holes to mount a micro limit switch in either vertical or horizontal position and a elongated M5 hole for mounting and adjusting the plate to the extrusion.
Spring Loaded T-Nuts
In stock
₹15.00 – ₹35.00• These Spring Loaded T-Nuts fit 2020/3030/4040/4545 profile aluminum extrusion.
16 in 1 Sensor kit Compatible with Raspberry Pi 3 & Raspberry Pi 2 Model B
In stock
Original price was: ₹1,699.00.₹1,490.00Current price is: ₹1,490.00. Incl.GST / ₹1,262.71 Excl.GST
Metal Dual V Wheel Assembled
In stock
₹299.00 Incl.GST / ₹253.39 Excl.GST• This Chrome Steel V Wheel Kit is great for use with any hardened V Wheel Linear Guide System.
• They can be used with V-Slot Extrusion.
Openbuilds C-Beam Gantry Plate – Double Wide
In stock
₹1,299.00 Incl.GST / ₹1,100.85 Excl.GST• This C-Beam Double Wide Gantry Plate is designed to provide a stronger, more stable platform for your Builds.
• The extra wide wheel stance and ability to add up to 8 Mini V Wheels ensures this plate will be strong enough for most applications.
GT2 Closed Loop Timing Belt width-6mm
In stock
₹80.00 – ₹380.00• These GT2 belt Width 6mm Closed Loop Timing Belts are made of durable Neoprene and Fiberglass Cords.
• This products Purchase link Sizes available (mm): 200, 280, 400, 852
• Pitch: 2mm
• Width: 6mm
• Belt Height: 1.52 mm
• Tooth Height: 0.76mm
• Shape: Closed Loop
C-Beam Riser Plate Spacer Block
In stock
₹399.00 Incl.GST / ₹338.14 Excl.GST• This C-Beam Riser Plate was specially designed to be used in conjunction with the C-Beam Gantry Plate.
V-Slot Gantry Bundle Universal 20-80mm
In stock
₹1,689.00• This V-Slot Gantry Bundle Universal 20-80mmis consist of gantry plate i.e., made from 6063-T6 Aluminum and can be used with all sizes of V-Slot Extrusion, 20 mm to 80 mm, it also has been designed specifically to simplify construction.
Panel Mount Emergency STOP Button N/C Switch
In stock
₹364.00 Incl.GST / ₹308.47 Excl.GST• Installation Dimension: Φ22
• Rated Voltage and Current: 440V, 10A
• Button Internal contact: Silver/Copper
• Mechanical life: ≥2000000 times
• Electrical life: ≥500000 times
• Contact Resistance: ≤50mΩ
• Insulation resistance: ≥10mΩ
XLarge C-Beam Gantry Bundle
In stock
₹2,486.00 – ₹2,698.00• This Bundle is a great way to get all the parts for a C-Beam Gantry X/Y – XL .
• This Bundle allows two C-Beam Gantry Plates – XL to run along the C-Beam Linear Rail system perpendicular to each other, with the wheels on the outside and nut blocks on the inside
Lead Screw Tensioning Tool
In stock
₹415.00It can reduce lead screw whip, which is common in lead screws with lengths greater than 1000mm, and ensures that your machine is running smoothly, which is widely used on our WorkBee and QueenBee machine.
Nano Blue Coated PCB Milling drill bits
Out of stock
₹2,289.00• Carbide precision machined from bars of high-precision equipment, selection of high quality ultrafine particles.
• Has good milling and cutting performance, ensure the high efficiency of the work.
• Sufficient bending strength and wear resistance, slot milling, hole and the edge of the board, the surface is clean, neat, no glitches.
• High strength, resistance to bending, breakage resistance, and have excellent physical properties, long tool life.
Threaded Rod Plate for Nema 23 Stepper Motor
In stock
₹499.00 Incl.GST / ₹422.88 Excl.GST• This is the Threaded Rod Plate, it can be used with both V-Slot and Open Rail.
• The idea behind this plate is to give you a universal mounting plate for your projects that require a threaded rod.
Lead Screw T8*8 Anti-Backlash POM Nut Brass 8mm
In stock
₹199.00 Incl.GST / ₹168.64 Excl.GSTThis is T8 Spring Loaded Anti-backlash POM Nut For CNC 8mm Threaded Rod Lead Screw.
• Inner Diameter Size: 8 mm.
• Color: Brass.
• Material: Brass.
• Weight: 25 gm.
• Ideal for 8mm 4 Start Threaded Lead Screw.
Arduino(Compatible) UNO R3 with usb cable
In stock
₹1,485.00 Incl.GST / ₹1,258.47 Excl.GST• Microcontroller : ATmega328 SMD.
• Operating Voltage : 5V.
• Supply Voltage recommended : 7-12V DC.
• Digital I/O Pins : 14 (of which 6 provide PWM output).
• Analog Input Pins : 6.
• DC Current per I/O Pin : 40 mA.
• DC Current for 3.3V Pin : 50 mA.
• Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader.
• SRAM : 2 KB (ATmega328).
