Showing 61–80 of 81 resultsSorted by popularity
Clearance
LED Digital Display DC Energy Meter
In stock
• Operating Voltage:2.8-30VDC
• Test Voltage:2.8-30 VDC
• Rated Current:10A
• Measurement Accuracy:2%
250W Constant Current Boost Step-up Module Mobile Power Supply LED Driver
In stock
• Input voltage : DC8.5V-48V
• Output voltage : DC 10-50V
• Input current : 10A (MAX)
• Output current : 10A MAX
ATtiny13 Development Board Tiny13 AVR Minimum System Learning
In stock
• Reset button
• Two independent buttons
• Two LEDs
• ADC potentiometer
• 5V or 3.3V working voltage selection
3S 100A LiFePO4 Battery Balance Charging BMS Protection PCB Board-White
In stock
• Charging Current: 60A
• Current Balance: Yes
• Ampere balance (Current): 60MA
• Voltage balance accuracy: 4.14-4.24V
SOP16 to DIP8 EZ Programmer Adapter Socket Converter Module 150mil
In stock
• Universal soic,sop8(ez) so8 to dip 8 adapter 150mil ic.
• Programmer(1.27 Pitch) and all sop8 narrow chips.
• Suitable for all-11 series,all-100gang , lt-48 series, superpro series, top series and more.
• Support chips: 24cxx, 93cxx and all sop8 narrow chips.
SOP8 to DIP8 200-209 mil SMD IC Adapter Programmer Socket
In stock
• High-quality and durable
• Chip Encapsulation: SOP8
• SOP8 to DIP8 chip conversion
SOP8 toDIP8 150 mil SMD IC adapter programmer socket
In stock
₹600.00 Incl.GST / ₹508.47 Excl.GST• High-quality and durable
• Chip Encapsulation: SOP8
• SOP8 to DIP16 chip conversion
HB100 Microwave Doppler Radar Wireless Motion Sensor
In stock
• Low current consumption (typical 30 mA)
• CW or pulse operation
• Flat profile
• Long detection range (20 m)
• Supply voltage: 4.75V to 5.25V
• X-Band Frequency: 10.525 GHz
• Minimum Power Output: 13 dBm EIRP
Mitsubishi QY40P PLC Output Unit 12/24 VDC
In stock
• Overload Protection Function
• Overheat Protection Function
• Power Supply (V) : 12-24
• Current Type : DC
• Occupied I/O Points on PLC : 16
• Rated Load Voltage (VDC :  12/24
LED Scroller Matrix keyboard
In stock
• Switch Type: Momentary
• Pin Spacing (mm): 2.54
• 4×4 Matrix Keyboard Module with 16 buttons
Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 8mb Memory USB-TTL CH340G Compatible for Arduino UNO
In stock
• Microcontroller: ATmega328IC
• Wi-Fi: ESP8266
• USB-TTL converter: CH340G
• Power Output: 5V-800mA
• Power input USB: 5V (500mA max.)
• Power input VIN/DC Jack: 9-24V
• Power Consumption: 5V 800mA
• Logic Level: 5V
• WiFi: 802.11 b/g/n 2.4 GHz
• USB type: Micro USB
• USB Clock Frequency: 16 MHz
• Operating Supply Voltage: 5V
• Digital I/O Pins: 14
• Analog I/ O Pins: 6
• Memory Size: 32 Mb
• Interface Type: serial
• Operating temperature: −40С°/+125С°
Mini HDMI To VGA Female With Audio Cable
In stock
• Supporting for resolutions up to 1920×1080 (60Hz)
• Compatible with laptops, HD players, players, monitors, TVs, projectors.
ARM STM32 Arduino Minimum System Dev Board
In stock
• Frequency: 72 MHz
• Operating Voltage: 3.3 V
• Input Voltage (recommended): 3 V – 12 V
D1 ESP8266 Wifi Development Board
In stock
• Based on ESP-8266EX.
• Arduino compatible, using Arduino IDE to program.
• Support OTA wireless upload.
• Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
• The direct use of Arduino IDE development, the same operation with Arduino UNO.
• Operating Voltage: 3.3V
• Digital I/O Pins: 11
• Analog Input Pins: 1
Flash Chip IC Test Clips Socket Adapter Programmer
In stock
• This item for sop8 chip ,such as 25c, 24c , 93c and so on .
• It can be used for the online in-circuit sop8 -dip8 adapter ,it is used for a sop8 chip programming that has been soldered on circuit board , it can online programming the sop8 chip , do not need take the chip of the circuit board , so it can save people’s time
AVR ISP MKII compatible USB clone programmer
In stock
• Acceptable target power voltage 2~5V.
• Competitive with Window XP, Window 7, Window 8.
8 Channel High Level Solid State Relay Module 250VAC 2A
In stock
• Power supply – 12VDC/160mA
• Trigger Voltage (VDC) – 12
• Switching Voltage (VAC) – 240@2A
• Isolation – Phototriac
5V MAX II EPM240 CPLD Minimum System Core Board Development Board
In stock
• This CPLD chip is adapted to good low-cost CPLD/FPGA introduction.
• It can be used for product verification and development with Byte- and USB- downloader.
• Easy to use and installation: the module has JTAG, power interface and all connected pins you need, it can run after connecting to DC 5V power supply.
M512 PIC ICD2 Programming Adapter PICKIT2 PICKIT3 Universal Programmer Seat
In stock
• Installing the microcontroller, 28-pin, 40-pin microcontroller left aligned 28/40P (A) This flag line short-circuit cap on the A position.
• The 8,14,18,20-pin microcontroller aligned on the left 8P/14P/18P/20P flag line (B), shorting cap on the B position.
• The ICD2, KIT2, KIT3 crystal head or 6Pin Block programming connection for programming the programming operation. Note: A separate program of the seat can not be programmed the chip is programmed functions.
HL-340 USB 2.0 to RS232 Serial port COM DB9 9 Pin Adapter Cable
In stock
₹299.00 Incl.GST / ₹253.39 Excl.GST• Side 1: Serial DB9 Male Com port RS232
• Side 2: USB Male pin Type A 2.0
• Supports remote wake up and power management
• Transfer Rate: 1Mbps
• Support all windows and Linux operating systems, driver available online for older versions














