Showing 21–40 of 1989 resultsSorted by popularity
4 Core Shielded Xtension Cable 22AWG 2.5 meters
In stock
₹825.00 Incl.GST / ₹699.15 Excl.GST• This Stepper Cable is a terminated at one end with a JST-SM 4 Pin Female connector (standard for our NEMA23 Stepper Motors and our High Torque NEMA23 Stepper Motors) and the other end stripped and tinned for easy termination.
Inductive Proximity Sensor – LJ12A3-4-Z/BX NPN DC6-36V 4mm Normally Open Proximity Switch
In stock
₹427.00 Incl.GST / ₹361.86 Excl.GST• Red LED checks the state of the proximity sensor
• High repeated positioning accuracy
• High switching frequency
• Wide voltage range
• Outer (Thread) Diameter: M12
• Antivibration, dust, water, and oil prevention
• Reverse power protection, short circuit protection, directly connecting with PLC
• Can replace small switches and limit switches
3 Hole Joining Strip Plate
In stock
₹150.00 Incl.GST / ₹127.12 Excl.GST• These heavy duty 3 Hole Joining Strip Plates are perfect for any project requiring connection strength.
Mini V Gantry Plate
In stock
₹599.00 Incl.GST / ₹507.63 Excl.GST• This little gantry plate is used on the Mini V Gantry using the Mini V Wheels.
• It’s super strong and compact.
TR8x8 Metric Acme Lead Screw length 1057mm
In stock
₹2,190.00 Incl.GST / ₹1,855.93 Excl.GST• High Quality precision 8mm Translation, Tr8*8-2p (4 start) trapezoidal lead screw. This specification is perfect for a combination of high speed and torque.
• The large 8mm diameter minimises whipping, and each start having a 2mm pitch provides a quick 8mm translation.
• This is a precise lead screw which is widely used in reprap community as well as for DIY CNC projects
• Large diameter helps eliminate whipping
• High pitch which provides a quick 8mm translation for every single revolution
Limit Switch for CNC/3D Printers
In stock
₹70.00 Incl.GST / ₹59.32 Excl.GST• Micro limit switches are a simple but effective solution to providing a datum for your machine and keep it within its intended operating range.
• This microswitch can be used as a limit switch for CNCs and 3d Printers especially Delta type machines.
Brass Lead Screw Tension Nut Tr8*8 For CNC Machines
In stock
₹189.00 Incl.GST / ₹160.17 Excl.GST• This is a brass tension nut that will allow you to apply tension or simply hold in place the lead screws.
• It has an M5 set screw to ensure a no slip lock when set in the desired position.
• Learn more on how to use the tension system with our Tension based actuators.
3D Printer Parts Cable Saddle Pack
In stock
₹57.00 Incl.GST / ₹48.31 Excl.GST• These Cable Saddles are a great way to organise your cables.
• With the included M5 8mm Low Profile Screw and Drop-in Tee Nut the Cable Saddle can fit on either V-Slot or Plates. See the photos for some mounting options.
Cable Drag Chain Mounting Bracket
In stock
₹216.00 Incl.GST / ₹183.05 Excl.GST• Cable Drag Chain Mounting Bracket silver Anodized for QueenBee Work bee Lead CNC OX CNC and Others Machine Kit.
• These Cable Drag Chain Mounting Brackets are a great way to fix your Cable Drag Chains to your build.
• The multiple holes and slots make it really easy to attach a wide variety and size of Cable Drag Chain ends.
MACH 3 Breakout Board CNC USB MACH3 100Khz 4 Axis Interface Driver Motion Controller +USB Cable+CD
In stock
Original price was: ₹1,899.00.₹1,599.00Current price is: ₹1,599.00. Incl.GST / ₹1,355.08 Excl.GST• This type of the CNC USB MACH3 Controller Card is of strong anti-interference ability, the frequency converter interface is isolated from the computer and the main control circuit.
• The interference signal will not be introduced because of the introduction of the external strong current equipment.Support for 4-axis linkage, you can connect four stepper motor drives or servo drives
• Support automatic probe tool, Emergency input, limit switch, connecting electronic handwheel.
• Need to use an external 24V DC power supply to isolate the USB and external ports, and to make the system more stable.
• 4 general-purpose isolated relay drive output can drive four relays for controlling the spindle starts, forward and reverse rotating pumps, and other devices.
• Compatible with windows 7/8/10.
Rubber End Stop
In stock
₹161.00 Incl.GST / ₹136.44 Excl.GST• These rubber end stops are perfect for placing on the end of a linear rail to stop the carriage from running too far.
• Use them in conjunction with the limit switches as a backup.
Openbuilds C-Beam Gantry Plate – XL
In stock
₹1,299.00 Incl.GST / ₹1,100.85 Excl.GST• Designed for use with the C-Beam linear rail using our Solid V-Wheels.
• The XL Gantry is an extremely strong gantry for your builds!
10Pcs HSS 4 Flute Milling Cutter 1.5-6mm End Mill Tool Set
In stock
₹2,029.00 Incl.GST / ₹1,719.49 Excl.GST• 10Pcs HSS 4 Flute Milling Cutter 1.5-6mm End Mill Tool Set Straight Shank Router Bit CNC Tools for Wood Metal Engraver Mill
End Cap
In stock
₹149.00 Incl.GST / ₹126.27 Excl.GST• Add a finishing touch to your V-Slot project with this black anodized aluminum end cap.
• Specially designed to fit 2020 profile
V-Slot Door Handle
In stock
₹199.00 Incl.GST / ₹168.64 Excl.GST• Give your projects a lift with this nice door handle.
• This handle bolts directly to V-Slot extrusion with included mounting screws and t-nuts.
• Size: 108(L) x 20(W) X 37mm(H) – 90 (Centre to Centre Mounting Hole)
C-Beam Gantry Plate
In stock
₹799.00 Incl.GST / ₹677.12 Excl.GST• The size is wide enough to fit the actuator without any over hang while the standard gantry layout allows for a variety of mounting options – including the Acme Nut Block and Lead Screw.
Timing Belt Crimp Clamp
In stock
₹20.00 Incl.GST / ₹16.95 Excl.GST• This is a nice metal crimp clamp that will give your looped timing belt connections a finished look.
• These are alternative to the ‘zip tie’ method.
Openbuilds CNC Jog Knob handwheel for T8 screw
In stock
₹399.00 Incl.GST / ₹338.14 Excl.GST• Used this Jog Knob to fine tune your machine’s position.
• Simply attach the jog knob to the 8mm Acme Lead Screw and tighten using the included M4 set screws.
Slot Washer
In stock
₹15.00 Incl.GST / ₹12.71 Excl.GST• These Slot Washers can be used to bridge the V-Slot to allow for mounting of various components, they can also be used elsewhere on your machine.
L Type Belt Mount Plate
In stock
₹99.00 Incl.GST / ₹83.90 Excl.GST• This Belt Mount Plate L Type gives an easy way to attach the ends of an open ended belt to V-Slot or other T-Slot extrusion.
• The belt is wrapped through the slots and over itself like a typical back pack strap.
