XTOOL
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
D Series
xTool SafetyPro™ AP2 Air Purifier
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
SCULPFUN SF-A9
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Twotrees Double Sided PEI Spring Steel Sheet Magnetic Heated Bed (Textured+PEI)
₹2,199.00 – ₹2,799.00
Volcano Heated Silicone Block aluminum 20*20*12mm for 3D Printer
₹220.00 Incl.GST / ₹186.44 Excl.GST
₹1,899.00 – ₹2,900.00
【Easy to install】Stick the soft magnetic base to the heating bed of your 3D printer, then put the stacked PEI steel foil platform on top and you are ready to use. the PEI surface sticks to the magnet almost too well, it makes it so easy to switch between smooth bottom surfaces and textured bottom surfaces.
【Easy to use】For most filaments, no need for stick glue, tape or other adhesive. Good adhesion can be achieved when the temperature of the heated bed is around 60°C. When the PEI building surface has cooled, the print can be easily removed by hand by simply bending the spring steel PEI slightly. The maximum printing temperature of PEI is 120°C, it is compatible with most of filament, such as: PLA/ ASA/ PLA+/ ABS etc.
37
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Description
310*310mm
- 【Kit Includes】1 pcs Double-sided PEI sheet (One side smooth PEI, one side textured PEI). 1 pcs Flexible adhesive backed magnetic base. Double-sided PEI sheets produced using advanced technology.
- 【Easy to install】Stick the soft magnetic base to the heating bed of your 3D printer, then put the stacked PEI steel foil platform on top and you are ready to use. the PEI surface sticks to the magnet almost too well, it makes it so easy to switch between smooth bottom surfaces and textured bottom surfaces.
- 【Easy to use】For most filaments, no need for stick glue, tape or other adhesive. Good adhesion can be achieved when the temperature of the heated bed is around 60°C. When the PEI building surface has cooled, the print can be easily removed by hand by simply bending the spring steel PEI slightly. The maximum printing temperature of PEI is 120°C, it is compatible with most of filament, such as: PLA/ ASA/ PLA+/ ABS etc.
- 【Compatibility】The size of PEI sheet is 310*310mm, not warped. It is compatible with most printers on the market with a build size of 300*300mm. It is suitable for CR10/CR10S, X40 IDEX/X40 V2, KP5L, S8 Pro/Plus, Sidewinder X1 X2, TL-D3 Pro, Twotrees SP-5, BLU-5/ Bluer Plus and other 3D printers. If your 3D printer has a 310x310mm heat bed platform, This PEI sheet is compatible with your 3D printer.
235*235mm
- 【Kit Includes】1 pcs Double-sided PEI sheet (One side smooth PEI, one side textured PEI). 1 pcs Flexible adhesive backed magnetic base. Double-sided PEI sheets produced using advanced technology.
- 【Easy to install】Stick the soft magnetic base to the heating bed of your 3D printer, then put the stacked PEI steel foil platform on top and you are ready to use. the PEI surface sticks to the magnet almost too well, it makes it so easy to switch between smooth bottom surfaces and textured bottom surfaces.
- 【Easy to use】For most filaments, no need for stick glue, tape or other adhesive. Good adhesion can be achieved when the temperature of the heated bed is around 60°C. When the PEI building surface has cooled, the print can be easily removed by hand by simply bending the spring steel PEI slightly. The maximum printing temperature of PEI is 120°C, it is compatible with most of filament, such as: PLA/ ASA/ PLA+/ ABS etc.
- 【Compatibility】The size of PEI sheet is 235*235mm, not warped. It is compatible with most printers on the market with a build size of 220*220mm. It is suitable for Ender 3 series, Ender 5/Pro, CR 20/Pro, Mega Pro, Kobra, Aquila/C2/S2/X2, Odin-5 F3, Neptune X/2/2S, Mingd D2, LK4 / LK4 Pro, B1, A10M/A10T and other 3D printers. If your 3D printer has a 235x235mm heat bed platform, This PEI sheet is compatible with your 3D printer.
220*220mm
- 【Kit Includes】1 pcs Double-sided PEI sheet (One side smooth PEI, one side textured PEI). 1 pcs Flexible adhesive backed magnetic base. Double-sided PEI sheets produced using advanced technology.
- 【Easy to install】Stick the soft magnetic base to the heating bed of your 3D printer, then put the stacked PEI steel foil platform on top and you are ready to use. the PEI surface sticks to the magnet almost too well, it makes it so easy to switch between smooth bottom surfaces and textured bottom surfaces.
- 【Easy to use】For most filaments, no need for stick glue, tape or other adhesive. Good adhesion can be achieved when the temperature of the heated bed is around 60°C. When the PEI building surface has cooled, the print can be easily removed by hand by simply bending the spring steel PEI slightly. The maximum printing temperature of PEI is 120°C, it is compatible with most of filament, such as: PLA/ ASA/ PLA+/ ABS etc.
- 【Compatibility】The size of PEI sheet is 220*220mm, not warped. It is suitable for I3 mega S, Anets A8/A6 and other 3D printers. If your 3D printer has a 220x220mm heat bed platform, This PEI sheet is compatible with your 3D printer.
More Products
V-Slot NEMA 17 Linear Actuator Bundle (Belt Driven) OPENBUILDS
In stock
₹9,399.00 Incl.GST / ₹7,965.25 Excl.GST
SKU:
111-2080-1000
SD20 Waterproof Cable Mount Aviation Connector Male Plug Female Socket IP68 – 14Pin
In stock
₹899.00 Incl.GST / ₹761.86 Excl.GST
SKU:
MOSD20K-14P
GT2 16 Toothless Idler Pulley Timing Pulley Aluminum Wheel for 3D Printer
In stock
₹119.00 Incl.GST / ₹100.85 Excl.GST
SKU:
GT2-20DS-6-6W
Prahlad Karthick (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Sakuntala Trivedi (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Mahinder Jha (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Santos Dedha (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Vina Gupta (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Ramesa bhai (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Angee Ganguly (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Nisha Katiyar (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Jaladhi Gupta (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Niranjana Saxena (verified owner) –
Kartik Aayan (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Arni Chaturvedi (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Alka Banerjee (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Mithalesh Ghosh (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Rambabu Kohli (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Gopal Das (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Sulochana Nath (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Ahalya Ganguly (verified owner) –
Nitu Bisht (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Aadiv Garg (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Aakesh Pandey (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Aakil Rawat (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Ashutosh Jha (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Sekha Sharma (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Chandrabha Tayal (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Mahadev bedi (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Mangi Sharma (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Harshil Patel (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Bhavana ben (verified owner) –
Shravan Mishra (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Arumugam Chauhan (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Rakshan Kapoor (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Ganga Kant (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Jaladhi Bansal (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Rajiv Shukla (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Shrimati Priti (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Drisana Banerjee (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Kalpana (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Virendra Chawla (verified owner) –
Amol Gupta (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Chirayu Tayal (verified owner) –
Saroja Singh (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Mahika Gupta (verified owner) –
Surinder Singh (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Manjula ben (verified owner) –
Soni Bansal (verified owner) –
Kailash Jain (verified owner) –
Niraj Sastry (verified owner) –
Jasvir Kripal (verified owner) –
ParvatiJindal (verified owner) –