XTOOL
IKIER
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
xTool F1
XTool P2
xTool D1 Pro 40W + 10W Kit
xTool D1 Pro
xTool M1
Air Assist Set
Honeycomb Panel Set
Extension Kit
Motheboard
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
New! SCULPFUN S30 Ultra
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Twotrees MK8 Extruder Upgraded Aluminum Block Bowden Extruder 1.75mm Filament Reprap Extrusion
₹750.00
- The metal extruder has better pressure and can be pushed into the printer nozzle to improve the performance of the printer. Our extruder kit has an adjustable screw that allows you to adjust the pressure of the extruder gearbox as needed.
- All-metal aluminum alloy, kit and must be assembled. The metal material extruder set is more stable and durable during operation than the original plastic extruder set. DIY kit and you need to assemble by yourself.
- A stepper motor is characterized by converting a series of input pulses into precisely defined increments of the shaft position.
This is a high quality motor that can be used for long periods of time without getting stuck.
Check Estimated Delivery at
Shipping to IN
10
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Extruder Kit Left Side Upgraded Red MK8 All Metal Bowden for 1.75mm Filament
Enhanced 3D Printer Extruder Replacement Kit – Suitable for Ender-3 PRO,Tornado,CR-10,CR-10S. Easy to install, unscrew the old original plastic extruder and screw in the new metal extruder and ready to print. Dual-gear extrusion mechanism, high extrusion force for uniform feed. Made of aluminum alloy, full metal, high quality and durable, able to enhance the performance of the original printer.
Advantages of Metal Extruder: The metal extruder has better pressure and can be pushed into the printer nozzle to improve the performance of the printer. Our extruder kit has an adjustable screw that allows you to adjust the pressure of the extruder gearbox as needed.
All-metal aluminum alloy, kit and must be assembled. The metal material extruder set is more stable and durable during operation than the original plastic extruder set. DIY kit and you need to assemble by yourself.
A stepper motor is characterized by converting a series of input pulses into precisely defined increments of the shaft position.
This is a high quality motor that can be used for long periods of time without getting stuck.
Extruder Kit Right Side Upgraded Red MK8 All Metal Bowden for 1.75mm Filament
Enhanced 3D Printer Extruder Replacement Kit – Suitable for Ender-3 PRO,Tornado,CR-10,CR-10S. Easy to install, unscrew the old original plastic extruder and screw in the new metal extruder and ready to print. Dual-gear extrusion mechanism, high extrusion force for uniform feed. Made of aluminum alloy, full metal, high quality and durable, able to enhance the performance of the original printer.
Advantages of Metal Extruder: The metal extruder has better pressure and can be pushed into the printer nozzle to improve the performance of the printer. Our extruder kit has an adjustable screw that allows you to adjust the pressure of the extruder gearbox as needed.
All-metal aluminum alloy, kit and must be assembled. The metal material extruder set is more stable and durable during operation than the original plastic extruder set. DIY kit and you need to assemble by yourself.
A stepper motor is characterized by converting a series of input pulses into precisely defined increments of the shaft position.
This is a high quality motor that can be used for long periods of time without getting stuck.
Package Include:
1*MK8 Extruder Upgraded Aluminum Block Bowden Extruder 1.75mm Filament Reprap Extrusion (Left/Right )
15 Days Warranty
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Mechblock customers from any kind of manufacturing defects. Reimbursement or replacement will be done against manufacturing defects.
What voids warranty:
If the product is subject to misuse, tampering, static discharge,mishandelling of the product, accident, water or fire damage, use of chemicals & soldered or altered in any way.
41 reviews for Twotrees MK8 Extruder Upgraded Aluminum Block Bowden Extruder 1.75mm Filament Reprap Extrusion
Clear filters
TwoTrees is one of the biggest producer of 3d printer and accessories in China, today comprises R&D, Produce, and Retailing; that creates high-quality products. It is a technology company present in all four major sectors of the 3Dprinter market: 3D Printers, Laser engravers, Spare parts & accessories and filaments.
TwoTrees currently employs over 200 people across the world and reported sales of 10 million dollars in 2021. Over these years, TwoTrees has carefully preserved and enhanced consumer experience by resolutely focusing on the quality of their products and services. Vertical integration across the value chain cultivates this excellence both upstream and downstream, from sourcing of the finest raw materials to production and worldwide retailing. This model guarantees the excellence of our products over time.
We are every bit as uncompromising about our ethics and our underlying social and environmental responsibilities. TwoTrees has always been strongly committed to ethical behavior and insists on integrity in all our activities and relations, whether with employees, partners or other stakeholders.
More Products
Cooler Boss CAH-209-03 Cooling Fan for CPU
In stock
Original price was: ₹8,499.00.₹3,990.00Current price is: ₹3,990.00. Incl GST (₹3,381.36 +18%GST)
SKU:
CAH20903
T8 ACME Anti Backlash Spring Loaded Nut For CNC 8mm Threaded Rod Lead Screw
In stock
₹192.00
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
MO-HD0024
TwoTrees-TTC 450 CNC Router Machine Kit with 500W Spindle 12000rpm High Precision and Accuracy
In stock
Original price was: ₹53,999.00.₹49,999.00Current price is: ₹49,999.00. Incl GST (₹42,372.03 +18%GST)
SKU:
TwoTrees500WTTC450
Twotrees A4988 Stepper Motor Driver Module Green PCB
In stock
₹190.00 Incl GST (₹161.02 +18%GST)
SKU:
120901003
Nylon Plastic Pan Head Cross Round Screw
In stock
₹6.00 – ₹34.00
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
MOHD-57
Lata Parihar (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Nilam Rani (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Sadhana Jha (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Aravind chopra (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Chintan Chaturvedi (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Anum Garg (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Fulmati Devi (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Citra Jain (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Jagannath Kuswaha (verified owner) –
Amirthini Rawat (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Gajdant Pandey (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Akshayaguna Garg (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Pooja Rawat (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Bhavani Srivastav (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Lalu Sharma (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Vimal Hebbar (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Udai Mallhotra (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Madhusudan Mishra (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Ganesha Chaturvedi (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Sarasvati Verma (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Kalavti (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Chaitali Gupta (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Aryabhata Chauhan (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Ashish Pandey (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Prasad Nair (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Santos Dedha (verified owner) –
Akash Choudhary (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Devmani Apte (verified owner) –
Padma Mahajan (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Rashid (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Bhaskara Tayal (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Mohani Sinha (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Devendra Anand (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Champa Kaushik (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Sudhakar Dwivedi (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Sonu Gupta (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Ekalinga Patel (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Joseph (verified owner) –
Sangeeta Sachdeva (verified owner) –
Ehan Jha (verified owner) –
Acchutan Pandey (verified owner) –