USONGSHINE 3D Printer Cooling Fan 5010 DC 24V/12V/5V Brushless Cooling Fan with 2Pin Wire Mini Fan for 3d Printer Parts
₹180.00 – ₹220.00 (Incl. GST)
USONGSHINE 3D Printer Cooling Fan 4020 DC 24V/12V/5V Brushless Cooling Fan with 2Pin Wire Mini Fan for 3d Printer Parts
₹190.00 – ₹230.00 (Incl. GST)
USONGSHINE 3D Printer Cooling Fan 4010 DC 24V/12V/5V Brushless Cooling Fan with 2Pin Wire Mini Fan for 3d Printer Parts
₹170.00 – ₹200.00 (Incl. GST)
- Low noise: less than 20 dBA, size: 40 *40 * 10mm, High quality: Allow your machine to cool down normally.
- Wide range of applications: Suitable for hot end cooling, printers or other cooling requirements, such as: B. small communication devices for heat radiation; PC CPU server, cooling capacity, etc.
- Interface type: JST-XHP-2, cable length: approx. 30 cm.
18
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
- Low noise: less than 20 dBA, size: 40 *40 * 10mm, High quality: Allow your machine to cool down normally.
- Wide range of applications: Suitable for hot end cooling, printers or other cooling requirements, such as: B. small communication devices for heat radiation; PC CPU server, cooling capacity, etc.
- Interface type: JST-XHP-2, cable length: approx. 30 cm.
Specification:
Type : 4010 ventilator
Size: 40x40x10mm
Spanning:DC 24V
Current rating: 0.1A
Power consumption: 2.4W
Revolution: 7000 10% for RPM
Noise: 27dBA (quiet)
Air volume: 6CFM
Specification:
Type : 4010 ventilator
Size: 40x40x10mm
Spanning:DC 12V
Current rating: 0.07A
Power consumption: 1.2W
Revolution: 5600 10% for RPM
Noise: 18dBA (quiet)
Air volume: 6CFM
Storage: Oil storage
Specification:
Type : 4010 ventilator
Size: 40x40x10mm
Spanning:DC 5V
Current rating: 0.25A
Power consumption: 1.25 W
Revolution: 5000 10% for RPM
Noise: 22dBA (quiet)
Air volume: 5CFM
Storage: Oil storage
Lifespan: 30000 hours
Package Include :
1*Twotrees Cooling Fans 5/12/24 Volt Brushless DC Fans( optional )
| Brand | |
|---|---|
| Condition | |
| HSN Code |
48 reviews for USONGSHINE 3D Printer Cooling Fan 4010 DC 24V/12V/5V Brushless Cooling Fan with 2Pin Wire Mini Fan for 3d Printer Parts
Clear filters
Usongshine is a brand that sells cooling fans and other 3D printer parts and accessories. Their fans are suitable for hot end cooling, printers, and other cooling needs, such as small communication devices for heat radiation and PC CPU servers. Usongshine fans are quiet, with noise levels less than 20 dBA
More Products
Zatomic Clover Dragon – Multicolor
In stock
Original price was: ₹4,999.00.₹1,999.00Current price is: ₹1,999.00. (Incl. GST)
SKU:
ZTM_DRGN_MULTI_00011
Zatomic Gemstone Dragon – Orange
In stock
Original price was: ₹4,999.00.₹1,999.00Current price is: ₹1,999.00. (Incl. GST)
SKU:
ZTM_DRGN_ORANGE_00015
Automatic Conveyor Feeder for xTool P2 – All in one kit (90″)
In stock
₹89,999.00 (Incl. GST)
SKU:
Allinone90
CNC Engraving Bits 1/8″ Shank Conical V-Bits Tip Flat Bottom Sharp Cutting Router Rotary Tool Set for PCB PVC Wood Acrylic Metal Aluminum 3.175mm 10-90 Degree 10Pcs – 30D, 0.6mm
In stock
₹1,210.00 (Incl. GST)
SKU:
EM04-30D*0.6
Pravin Banerjee (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Shailendra Deepa (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Chandranshu Chaturvedi (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Reena Sharma (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Dayanita Shinde (verified owner) –
Narayanamma Iyer (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Jeladhi Gupta (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Tapas Sahani (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
MantuSharma (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Mithu Bansal (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Shabana Ahmed (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Nisha Katiyar (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Kaanishk Pandey (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Narendra Verma (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Udai Kapoor (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Abhisumat Garg (verified owner) –
Ishaan Chadha (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Ishivara Pandey (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Chandana Mishra (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Gaurav Rana (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Charumati Gupta (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Rikita Goel (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Doshagya Mishra (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Devanand Banerjee (verified owner) –
Nitesh Sinha (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
ChhoteLal (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Sampat Sharma (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Aakesh Garg (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Santos Dedha (verified owner) –
Mamta Pandey (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Avinash hudda (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Amartya Rawat (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Trilochan Kapoor (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Priti Kohli (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Bishvajit Gupta (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Amitabh Parihar (verified owner) –
Dularee Shinde (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Farid Parihar (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Baban Kumar (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Ratna Kaushik (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Chaganti Patel (verified owner) –
Ijay Pandey (verified owner) –
Baldev Singh (verified owner) –
Sarada Dwivedi (verified owner) –
Rama prasad (verified owner) –
Dhirendra Soni (verified owner) –
Eshana Anand (verified owner) –
Kunti Thappar (verified owner) –