Main Control Board for xTool S1

The Main Control Board for xTool S1 is a replacement control board designed for the xTool S1. It serves as the machine’s central control component and connects with key machine components through dedicated ports. xTool confirms that this main control board is compatible with the S1.

Key Features

• Designed specifically for the xTool S1
• Replacement main control board
• Provides connections for major S1 components
• Compatible with xTool S1
• Suitable for replacing a faulty or damaged main control board

Main Control Board Function

The main control board acts as an important control and connection point within the xTool S1. Its ports connect components including the laser module, X-axis, Y-axis and Z-axis motors, limit sensors, interface boards, lighting panels, and exhaust fan.

Compatibility

Replacement Information

The Main Control Board for xTool S1 can be used when the original S1 main control board requires replacement. xTool provides an official replacement guide for the installation process.

• Official xTool Main Control Board Replacement Tutorial: Replace the Main Control Board of xTool S1

Before replacing the board, xTool recommends appropriate troubleshooting to determine whether the main control board is actually the source of the problem.

Important Compatibility Consideration

After replacing the main control board, certain S1 configurations may require additional attention. xTool documents a potential red crosshair positioning issue related to differences in motor encoder wiring between earlier and later S1 versions.

For this reason, verify the machine configuration and follow the applicable xTool replacement and setup instructions before installation.