XTOOL
IKIER
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
xTool F1
XTool P2
xTool D1 Pro 40W + 10W Kit
xTool D1 Pro
xTool M1
Air Assist Set
Honeycomb Panel Set
Extension Kit
Motheboard
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
New! SCULPFUN S30 Ultra
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
1.75/0.4mm V6 Stainless Steel Brass Nozzle M6 Thread
₹190.00 – ₹200.00
4.1 through hole throat M6*30MM stainless steel pipe for 3D printer
₹150.00 Incl GST (₹127.12 +18%GST)
MK8 Clone CHT Brass Nozzle 1.75/0.4mm M6 high flow for 3d Printer part
₹300.00 Incl GST (₹254.24 +18%GST)
- Material: Brass
- Model: MK8 cht nozzles
- Thread: M6
- Highly-recommend for fast speed
- Anti-oxidation, smooth inner wall for uniform extrusion, no blocking, high hardness and wear-resistance
- Nozzle diameter: 0.2/0.4 / 0.6/0.8/1.mm
- Thermal conductive 105w/m.k
- maximum printing temprature – 300.c
- suitable material- pls,abs,tpu,pa,etc.
- output small orifice diameter -0.4mm
- error-0.1mm
- inner hole rouhness\ra 0.4um
In stock
In stock
Check Estimated Delivery at
Shipping to IN
16
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
High-quality brass material for durability and longevity
Compatible with both 1.75mm and 3.0mm filament sizes
High flow rate for faster and more efficient printing
Perfect replacement nozzle for your E3D V6 extruder
Easy to install and use
- Material: Brass
- Model: MK8 cht nozzles
- Thread: M6
- Highly-recommend for fast speed
- Anti-oxidation, smooth inner wall for uniform extrusion, no blocking, high hardness and wear-resistance
- Nozzle diameter: 0.2/0.4 / 0.6/0.8/1.mm
- Thermal conductive 105w/m.k
- maximum printing temprature – 300.c
- suitable material- pls,abs,tpu,pa,etc.
- output small orifice diameter -0.4mm
- error-0.1mm
- inner hole rouhness\ra 0.4um
Package Include :
1*MK8 Clone CHT Brass Nozzle 1.75/0.4mm M6
15 Days Warranty
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Mechblock customers from any kind of manufacturing defects. Reimbursement or replacement will be done against manufacturing defects.
What voids warranty:
If the product is subject to misuse, tampering, static discharge,mishandelling of the product, accident, water or fire damage, use of chemicals & soldered or altered in any way.
46 reviews for MK8 Clone CHT Brass Nozzle 1.75/0.4mm M6 high flow for 3d Printer part
Clear filters
TwoTrees is one of the biggest producer of 3d printer and accessories in China, today comprises R&D, Produce, and Retailing; that creates high-quality products. It is a technology company present in all four major sectors of the 3Dprinter market: 3D Printers, Laser engravers, Spare parts & accessories and filaments.
TwoTrees currently employs over 200 people across the world and reported sales of 10 million dollars in 2021. Over these years, TwoTrees has carefully preserved and enhanced consumer experience by resolutely focusing on the quality of their products and services. Vertical integration across the value chain cultivates this excellence both upstream and downstream, from sourcing of the finest raw materials to production and worldwide retailing. This model guarantees the excellence of our products over time.
We are every bit as uncompromising about our ethics and our underlying social and environmental responsibilities. TwoTrees has always been strongly committed to ethical behavior and insists on integrity in all our activities and relations, whether with employees, partners or other stakeholders.
More Products
Atomstack AC1 Lightburn Camera Precise Positioning For Laser Engraving Machine
In stock
Original price was: ₹14,999.00.₹12,999.00Current price is: ₹12,999.00. Incl GST (₹11,016.10 +18%GST)
SKU:
ATOMAC1
TwoTrees CNC 4th Axis Rotary Axis For TTC450 CNC Milling Machine
In stock
Original price was: ₹24,999.00.₹16,990.00Current price is: ₹16,990.00. Incl GST (₹14,398.31 +18%GST)
SKU:
TT-4thAxis
M512 PIC ICD2 Programming Adapter PICKIT2 PICKIT3 Universal Programmer Seat
In stock
Original price was: ₹340.00.₹250.00Current price is: ₹250.00. Incl GST (₹211.86 +18%GST)
SKU:
M512-UPS
AVR ISP MKII compatible USB clone programmer
In stock
Original price was: ₹2,499.00.₹1,799.00Current price is: ₹1,799.00. Incl GST (₹1,524.58 +18%GST)
SKU:
MB-MKII
TwoTrees Circular Laser Head 5.5w For CNC Engraving Machine
In stock
₹9,999.00 Incl GST (₹8,473.73 +18%GST)
SKU:
TTR5.5w
Ahilan Pandey (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Sabina Khatoon (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Paramar Bansal (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Shaarad Mallhotra (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Salim Saifi (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Kumar Shankar (verified owner) –
ManjitKumar (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Ridhaan Mallhotra (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Ashwin Parihar (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Gopi Gupta (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Motilal Karthick (verified owner) –
Kita Pandey (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Ramakant Pandey (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Deepa Bansal (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Parvin Sundar (verified owner) –
Charumati Tayal (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Prem Rawal (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Bhavana ben (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Ali Khan (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Lilavati Deepika (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Naga Koti (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Pawan Singh (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
NeelamKohli (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Agastya Chadha (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Ajit Narayan (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Manjula Achari (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Kedar Bitha (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Devendra Prasad (verified owner) –
Ashish Pandey (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Januja Jaiswal (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Kalyani Kohli (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Mana Gupta (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Iravaj Pandey (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Poonam Mishra (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Ankit Goswami (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Ranjita Dwivedi (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Manojj Kohli (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Prabha Ghosh (verified owner) –
Aija Rawat (verified owner) –
Shashikant Jha (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Kalyan Sharma (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Jhalak Mehta (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Bhagwan Singh (verified owner) –
Chak Chaturvedi (verified owner) –
Amirthini Bisht (verified owner) –
Jayashri Sharma (verified owner) –