XTOOL
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
Apparel Printer
MetalFab
xTool SafetyPro™ AP2 Air Purifier
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
iCube Series
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Circuit Breaker Tomzn Tpnl-32 C16 (230V)
₹549.00 Incl.GST / ₹465.25 Excl.GST
• Rated working: AC230
• Rated working frequency: 50/60Hz
• Electrical lifetime: 4000 times
• Trip characteristic: C type 5 to 10In instantaneous triping
• Rated service short circuit breaking capacity: 4.5KA
• Rated residual operating current: 0.03A
• Rated current: 16 10 16 20 25 32A
2 in stock
2 in stock
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Description
TPNL leakage protective Circuit Breaker
TPNL-32(DPNL) is applied to line overload and short circuit protective, leakage protective when AC 50/60 Hz, rated voltage 230V, and the rated current up to 32A. This breaker applies to overload and short-circuit protect of industry, commerce, residential houses or high building and other similar places. Confirm to IEC61009.1, GB16917.1.
1. Rated working: AC230
2. Rated working frequency: 50/60Hz
3. Electrical lifetime: 4000 times
4. Trip characteristic: C type 5 to 10In instantaneous triping
5. Rated service short circuit breaking capacity: 4.5KA
6. Rated residual operating current: 0.03A
7. Rated current: 16 10 16 20 25 32A
More Products
Flash Chip IC Test Clips Socket Adapter Programmer
In stock
C-Beam Linear Actuator Kit without Motor Assembled
In stock
Pradip (verified owner) –
Quite easy to use, nice design, surely will buy again
Darshan Kripal (verified owner) –
An awesome product with great flexibility. The customer support is superb. I recommend this without any doubt.
Abhiraja Rawat (verified owner) –
By far the best item on the market, you will not be disappointed.
Mahavir Shankar (verified owner) –
Quite easy to use, nice design, surely will buy again
Tanaia Goel (verified owner) –
Good response from the support.
Mina (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Anil Pandey (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Muhammad Ansari (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Ramakant Pandey (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Candy Parihar (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Mithalesh Das (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Rajiv Shukla (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Dharinee Shinde (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Kailash Jain (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Nishad Saxena (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Aagney Pandey (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Jaya Parihar (verified owner) –
Ranjit Kamble (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Aarna Jaiswal (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Sabitri Tanwar (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Charu Parihar (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Aniruddh Garg (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Iravaj Dwivedi (verified owner) –
Madhav Sinha (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Ahilya Bisht (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Ritu Gaikwad (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Lipika Jaiswal (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Suraj Nair (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Dipili Shinde (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Biswajit Goel (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Dipili Apte (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Sunitha Kohli (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Madhuri Mehta (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Shalee Banerjee (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Devendra Anand (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Surekha Singh (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Sujay Narayan (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Shrikant Pandey (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Dhanadaa Shinde (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Pratibha Antony (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Rubi Mittal (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Kavita Rawat (verified owner) –
Anura Anand (verified owner) –
Banita Mishra (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Jaswinder Mishra (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Chella Narayan (verified owner) –
Satendra Gupta (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Kisan Mishra (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Mithalesh Ghosh (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Ranajit Jha (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.