Automatic Conveyor Feeder for xTool P2
₹18,499.00 – ₹89,999.00
โข Automatic Conveying Farewell Accuracy Deviation
โข Easier Assembly
โข High Stability
โข Easy Positioning Adjustment
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Description
Automatic Conveyor Feeder for xTool P2
Larger Area,
Amazing Effects
The maximum processing area is supersized up toย 118”ร19.6”, giving you the option to engrave anything up toย 118 inchesย long in size effortlessly, and set more quantity at one time.
Automatic Conveying,
Farewell Accuracy Deviation
Automatic engraving path planning and material conveying;
Farewell to manual material feeding and accuracy deviation.
Creations Unrestrained
by Materials
The material range is expanded from plywood, acrylic and fiberboard to soft materials like felt, cork and EVA.
*Note: During processing, there may be a deviation of less than 2mm per 1000mm of conveying.
Creations Made Longer and Higher
More Thoughtful Design
Pressing Wheels, High Stability
The upper and lower pressure wheels use anti-slip materials, and materials of various sizes can be easily fixed to prevent them from slipping or shifting during the conveying process.
Buckle Design, Easier Assembly
With buckle design, the conveyor rail can be installed easily.
Color Markings for Pressure Setting
Different pressures need to be set for processing different materials. With color markings quickly matching each material pressure level, the pressure can be easily adjusted according to the material type.
Knob for Easy Positioning Adjustment
Users can easily adjust the position of materials with the lower knob.
Aligning Grids, for Precise Process
Align the material with the grids on the conveyor feeder and convey the material to the device, so that the material is parallel to the conveying direction.
Specification
| Product Information | Automatic Conveyor Feeder for xTool P2 |
|---|---|
| Applicable to | xTool P2 |
| Package Size | 30.2”ร10.1”ร9.1” (769ร255ร230mm๏ผ |
| Product Size | 27.1”ร7.8”ร5.3” (687ร200ร135mm) |
| Product Weight | 8.045kg |
| Max. speed | 160mm/s |
| Work Area | |
| Maximum Processing Area | 118”ร19.6” (3000mmร500mm) |
| Maximum Material Width | 24.5” (624mm) |
| Minimum Material Width | 2.5” (65mm) |
| Maximum Material Thickness | 0.55” (14mm) |
| Conveyor Rail | Support Hard Material Length (including hanging in the air 30cm) |
Support Processing Length (including hanging in the air 30cm) |
|---|---|---|
| Basic (2 pairs)*1 | 39” (1m) | 34” (0.85m) |
| Basic (2 pairs)*1+add on kit (2 pairs)*1 | 64.5” (1.64m) | 58.6” (1.49m) |
| Basic (2 pairs)*1+add on kit (2 pairs)*2 | 90” (2.3m) | 84.6” (2.15m) |
| Basic (2 pairs)*1+add on kit (2 pairs)*3 | 118” (3m) | 112.2” (2.85m) |
Soft Material
Without Conveyor Rail, the material can be hung down on both sides of the working area of conveyor feeder.๏ผSome soft materials need to be processed with PET tape๏ผ
Additional information
| Weight | 10 kg |
|---|---|
| Dimensions | N/A |
| Brand | |
| Condition | |
| HSN Code | |
| Max. Engraving Speed |
50 reviews for Automatic Conveyor Feeder for xTool P2
Clear filtersMore Products
TR8x8 Metric Acme Lead Screw length 1057mm
In stock
ARM STM32 Arduino Minimum System Dev Board
In stock
SOP8 to DIP8 200-209 mil SMD IC Adapter Programmer Socket
In stock
Saroj Kapoor (verified owner) –
The item and the design are very cool. Also the support is amazing, they always help you with any detail that you have.
Krishan Pandey (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Purushottam Sethi (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Shailesh tripathi (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Rekha Dwivedi (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Akshayaguna Pandey (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Chameli Gupta (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Jarita Banerjee (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Murali Jain (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Lalu Sharma (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Baburao Pandey (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Vanita Mishra (verified owner) –
Shalini Pandey (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Kailash Printers (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Ivaan Dwivedi (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Meena Goswami (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Anant Bansal (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Larisa Grover (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Ankush Pandey (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Janaki Agarwal (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Yashpal Goswami (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Hansika Ganguly (verified owner) –
Samir Mehta (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Pramod (verified owner) –
Mangesh Sharma (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Tanay Kapoor (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Dharv Mishra (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Bhavana ben (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Smita Pathak (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Uttam Chadha (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Pandurang Anand (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Ghanashyam Tiwari (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Devak Apte (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Sushama Sahani (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Arti Ahluwalia (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Baldev Singh (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Aditya Srivasta (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Deval Mishra (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Aahan Pandey (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Mina ben (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Premvati Sinha (verified owner) –
Atharv Mehta (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Sila Bansal (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Soma Khan (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Palana Saini (verified owner) –
Azha Mishra (verified owner) –
Kamalamma (verified owner) –
Chakrapaani Chaturvedi (verified owner) –
Rinki Goswam (verified owner) –
Darsha Mishra (verified owner) –