Twotrees 3D Printer Magnetic Hot bed Sticker Cover Double Layer for Ender 3
₹750.00 – ₹1,049.00 (Incl. GST)
1. SCOPE of APPLICATION: The magnetic print bed is a adhesive magnetic double layer, suitable for 3D printing
2. REPEATED USE: The magnetic print bed can be used repeatedly, which is manual pickup, not easy to warp edges
3. DURABLE and RELIABLE: The magnetic print bed has high temperature resistance, durability and strong magnetism
4. CONFIDENCE to USE: The magnetic pole can be used in any direction. The printed frosted layer of the magnetic print bed has strong adsorption force and stable toughness
5. CONVENIENT and PRACTICAL: The fixed layer of the magnetic print bed is durable and does not need to be replaced, and can be matched with multiple printing layers
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Parameters:
Product thickness: double layer; 1.8mm
Use requirements: hot bed temperature shall not exceed 60 °, or cold bed printing
Size: 220×22 0/235×23 5/310x310mm
features:
1. The magnetic pole corresponds to any direction
2. The printing frosting layer has strong adsorption and eliminates curling.
3. The fixed layer does not need to be replaced for a long time, and can be used with multi-layer printing.
4. Strong magnetic durability, excellent frost resistance of printing frosted layer
Color: blue; colour printing
Installation and use: tear off the back side B and the front protective film, and stick them directly
In the platform, side A is adsorbed on side B and adjusted horizontally to the pressure.
Adsorption layer:
The micro-pore frosting texture treatment can well combine the hot-melt material with the printing layer, reduce the deformation caused by shrinkage, and prevent curling. It has good adhesion and increases the adsorption of consumables during printing. When the temperature falls back, the adhesion of the parts suitable for obtaining is reduced.
Carbide layer:
Fe-based alloy with high thermal conductivity makes the platform more smooth. Iron can be attached to either side of the magnet to expand the compatibility of different consumables.
measures:
1. In order to effectively realize non-good warpage, it is recommended that the temperature of the hot bed should not exceed 50 ℃. If there is no hot bed, please use local speed regulation. The first layer is 17 and the third layer is started. Set it up quickly.
2. Please make sure it is level before use. If the machine cannot be straightened, please place the order carefully.
3. Do not directly contact the high-temperature nozzle with the surface. Please remove the model after printing. Don’t take the model the next day. Because this model is firmly attached to the printing surface, it is difficult to disassemble the module and shorten the service life of the platform.
4. If the first layer is found to be stuck during use, it depends on whether the third party mac hine and material platform used have been leveled. Due to insomnia machine and its consumption, each material manufacturer has its own design structure and printing temperature. So you can’t test them one by one. You need to test the appropriate temperature and setting parameters by yourself.
Package List:
1 x Magnetic Print Bed
49 reviews for Twotrees 3D Printer Magnetic Hot bed Sticker Cover Double Layer for Ender 3
Clear filtersMore Products
Wood Truss Screw Wax Self-tapping Screws
In stock
TwoTrees Circular Laser Head 5.5w For CNC Engraving Machine
In stock
ATOMSTACK R3 24W Automatic Rotary Roller for Laser Engraving Machine
In stock
LM8UU Polymer RJMP-01-08 Solid Polymer Bearing 8mm Shaft Linear Bearing
In stock
USONGSHINE Nema 17 17HS8401S Stepper Motor for CNC 3D printer
In stock
Amrita Desmukh (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
NeelamKohli (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Mangala Pathak (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Bhasvan Tayal (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Muni Devi (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Jayanti Singh (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Darsh Parihar (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Manikantan Pandey (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Yashoda Patil (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Raghav Parihar (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Ecalvi Phillips (verified owner) –
Galav Pandey (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Aravind chopra (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Rama kumar (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Anaka Bisht (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Bhagavan Mehto (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Manoj Mishra (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Padma Mahajan (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Shivaji Bhatt (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Enkateshwarlu Pandey (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Madhukar Pandey (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Sudama Gupta (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Nihal Sethi (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Anala Parihar (verified owner) –
Dipili Shinde (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Apurva Garg (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Hiran Dwivedi (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Ma Antony (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Manju Kumari (verified owner) –
Baburao Dubey (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Dhaval Mishra (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Prateek Sethi (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Ismail Khan (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Chavvi Jaiswal (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Sunaina Pandey (verified owner) –
Hirabai Mehta (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Kavi Goel (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Arumugam Chauhan (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Deven Goel (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Muhammed Nasir (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Shanta Ganguly (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
GaurammaIyer (verified owner) –
Deval Mishra (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Ranjit Kamble (verified owner) –
Prabha Ghosh (verified owner) –
Pritam Desai (verified owner) –
Kavan Dwivedi (verified owner) –
Basappa Gupta (verified owner) –
Manu Singh (verified owner) –