SUNLU PLA Glow in The Dark White 3D Printer Filament 1.75mm
₹2,299.00 Incl.GST / ₹1,948.31 Excl.GST
①【Glow in the Dark PLA】SUNLU glow in the dark PLA filament contains phosphorescent materials, which can glow in the dark after absorbing light energy. If it is exposed to UV lights, the luminous effect will be better.
②【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it’s suitable for almost all 1.75mm FDM 3D printers.
③【SUNLU Spool Diameter】Spool Diameter: 8.00″, Spool Width: 2.50″, Spool Hub Hole Diameter: 2.20″. The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers.
④【Recommend Settings】We recommend printing at a nozzle temperature of 200-210°C, bed temperature of 50-65°C, printing speed of 50-100mm/s.
⑤【Neatly Wound 3D Filament Spool】SUNLU’s self-developed neat winding device ensures that the filament is easy to use, with a 100% neat rate that reduces the risk of tangles and jams, and provides a smoother and more efficient 3D printing experience.
In stock
In stock
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Description
SUNLU PLA Glow in The Dark White
Dimensional Accuracy & Consistency – Glow in The Dark PLA filaments to be strict tolerances; Diameter 1.75mm, dimensional accuracy + / – 0.03 mm without any exaggeration; 1 kg spool
Clog-Free, Bubble-Free & Easy-to-use¡¿Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag.
Wide Compatibility¡¿Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.03mm.
Worry-free After-sales Service – We provide professional after-sales service for any SUNLU 3D filament you have purchased, which is more considerate and assured.
SPECIFICATIONS:
- Material: Grow in Dark PLA(PLA Based)
- Wire diameter: 1.75/3.0MM Tolerance: 0.02MM
- Printing temperature: 200-210
- Substrate temperature: no heating needs to be coated with glue
- Heating 50-65 can not be coated with glue
- Tensile force KGF: 11-16 (enterprise standard 23¡æ wire diameter 1.75 mm)
- Melt index: 7-9g/10min (190 ,2.16Kg) (refer to GB/T 3682.1-2018)
- Elongation at break: 4% (enterprise standard 23¡æ, wire diameter 1.75 mm)
- Melting point: 165-180
- Heat distortion temperature: 55
- Density g/cm3: 1.24
- Water Absorption: 0.5%
- Suggested printing speed: 50-100MM/s
- Bubble: 100% zero bubble
- Net weight: 1 KG/roll
- Gross weight: 1.3 KG / roll
Package Include:
1*SUNLU PLA Glow in The Dark White 3D Printer Filament 1.75mm
Additional information
| Weight | 1.5 kg |
|---|---|
| Dimensions | 22.5 × 22.5 × 6.5 cm |
| Brand | |
| Filament Diameter (mm) |
1.75 |
| Condition | |
| Filament Length |
330m |
| HSN Code | |
| Color | |
| Filament Material |
Glow in the Dark |
| Product Weight |
1kg |
| Tolerance |
±0.02mm |
8 reviews for SUNLU PLA Glow in The Dark White 3D Printer Filament 1.75mm
Clear filtersMore Products
C-Beam Linear Actuator Kit without Motor Assembled
In stock
Tensioner Torsion Spring for GT2 Timing Belt used in 3D Printer – 3 Pieces Pack
In stock
Red Optical Limit Switch Module with White 0.5m Wire for 3D Printes and Mini CNC
In stock
Ishani Goel (verified owner) –
Johar Mishra (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Durga Dutta (verified owner) –
Biswanath Singh (verified owner) –
Sukanti Joshi (verified owner) –
Kashvi Gupta (verified owner) –
Sobha Yadav (verified owner) –
Chandana Jha (verified owner) –