XTOOL
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
D Series
xTool SafetyPro™ AP2 Air Purifier
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
SCULPFUN SF-A9
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Original price was: ₹135.00.₹100.00Current price is: ₹100.00. Incl. GST
- Support MP3 format, playing power on automatically.
- When mp3 is played the red LED flashes.
- Support U disk (test 32G), TF Card (test 16G) play mode; power on default.
- Buttons can be adjusted up and down to control songs, volume up and down, pause or play, and mode switching.
- Press the menu button and enter the single / all-song play mode.
In stock
In stock
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Description
The Non-Destructive MP3 Decoding Board with Self-Powered TF Card U Disk Decoded Player module is used for playing tracks in the MP3 format stored on a micro SD card or USB memory. The perfect device for playing messages on platforms, warning signals, etc. Superior sound quality.
The onboard 2W mono amplifier (5V power of up to 3W) is connected to the speaker (recommendation 4 Ω 3W speakers), 3.5mm gold plated headphone jack can connect with headphones or external audio. With a MicroUSB port. Through the mobile power supply, 3.7V lithium battery, or USB 5V power supply. Support TF Card (mobile phone memory card) and U disk play mode.
No soldering with speaker terminals for easy wiring. The module is designed to make the modification.
Note:
- “Long press” approximate 2S.
- If you use U disk mode, it is recommended 5V power supply, and some U disk does not support a 3.7V power supply.
Features :
- Support MP3 format, playing power on automatically.
- When mp3 is played the red LED flashes.
- Support U disk (test 32G), TF Card (test 16G) play mode; power on default. TF card mode, if the TF card does not have the right type of operation.
- Buttons can be adjusted up and down to control songs, volume up and down, pause or play, and mode switching.
- Press the menu button to enter the single / all-song play mode. The default mode is the all-song mode when powered up. Pressing the Repeat button can replace the circulating mode.
Specifications:
| Input Supply Voltage (VDC) | 3.7 ~ 5.5 |
| Length (mm) | 50 |
| Width (mm) | 36 |
| Height (mm) | 9 |
Package Includes :
1 x Non-Destructive MP3 Decoding Board with Self-Powered TF Card U Disk Decoded Player Module
54 reviews for Non-Destructive MP3 Decoding Board with Self-Powered TF Card U Disk Decoded Player Module
Clear filtersMore Products
SD13 Waterproof Panel Mount Aviation Connector Male Plug Female Socket IP68 – 4Pin
In stock
MPU-9250 GY-9250 9 Axis Sensor Module I2C SPI Communication Board for Arduino
In stock
Stainless Steel Nozzle Throat with teflon Tube for E3D V6 Hot End 1.75mm Extruder
In stock
SD20 Waterproof Cable Mount Aviation Connector Male Plug Female Socket IP68 – 5Pin
In stock
Bhavika Saxena (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Varenya Chadha (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Madhukar Saini (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Chaitanya Rawat (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Pratibha Antony (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Pintu Mittal (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Anirudh Pandey (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Madhukar Dwivedi (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Aanan Agarwal (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Jagvi Mehta (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Anaka Bisht (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Dinesh (verified owner) –
Reena Sharma (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Rishab Kapoor (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Chakra Mehta (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Suresh Mallhotra (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Purushottam Sethi (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Naya Goswami (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Arif Alam (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Pankaj Sethi (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
BimalaSood (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Muhammad Ansari (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Ram Singh (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Yanisha Parihar (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Hansh Pandey (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Gaveshan Pandey (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Dhanadaa Apte (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Babulal Kohli (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Chak Chaturvedi (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
SheetalSelja (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Anil (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Sumana Jaiswal (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Seema Gupta (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Balabhadra Chauhan (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Mahadev Pandey (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Babita Kansal (verified owner) –
Prabha Ghosh (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Devak Jha (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Baban Kumar (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Madhavi Iyengar (verified owner) –
Harsha Pandey (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
NasimaJyoti (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Anjay Rawat (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Durga Saxena (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Malati Gaikwad (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Rupesh Jindal (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Gorakh Pandey (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Shanti (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Ashish Narayan (verified owner) –
Chirayu Tayal (verified owner) –