XTOOL
IKIER
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
xTool F1
XTool P2
xTool D1 Pro 40W + 10W Kit
xTool D1 Pro
xTool M1
Air Assist Set
Honeycomb Panel Set
Extension Kit
Motheboard
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
New! SCULPFUN S30 Ultra
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
TowerPro MG995 Gear Servo Motor
Original price was: ₹299.00.₹249.00Current price is: ₹249.00. Incl GST (₹211.02 +18%GST)
Mechanical Endstop Switch
₹899.00 Incl GST (₹761.86 +18%GST)
4 Digit PC ISA PCI Analyzer Diagnostic Test Post Card
₹1,699.00 Incl GST (₹1,439.83 +18%GST)
- Compatible With Both ISA bus and PCI bus.
- Determine defects by difference sounds coding with build-in speaker.
- Fully compatible with any kind motherboards which has the PCI and ISA bus slot
- It can diagnosis the motherboard signal which show the problem of CPU, Memory, video card, etc.
- The POST code display is made up of a dual, dot matrix hexadecimal read-out that display’s Power On Self Test (POST) status codes.
In stock
In stock
Check Estimated Delivery at
Shipping to IN
14
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Description :
- Fully compatible with any kind motherboards which has the PCI or ISA bus slot.
- It can test the bus speed of the PCI slot and the ISA slot.
- Determine defects by difference sounds coding with build-in speaker.
- Can diagnose the troubles of not only the motherboard, but also the card itself.
- The initiative code is specified and it is “0000” or “FFFF”.
- It can diagnosis the motherboard signal which show the problem of CPU, Memory, video card, etc.
Specification:
- Compatible With Both ISA bus and PCI bus.
- Determine defects by difference sounds coding with build-in speaker.
- Fully compatible with any kind motherboards which has the PCI and ISA bus slot
- It can diagnosis the motherboard signal which show the problem of CPU, Memory, video card, etc.
- The POST code display is made up of a dual, dot matrix hexadecimal read-out that display’s Power On Self Test (POST) status codes.
Package Include :
- 4 Digit PC ISA PCI Analyzer Diagnostic Test Post Card -1PC
15 Days Warranty
This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Mechblock customers from any kind of manufacturing defects. Â Reimbursement or replacement will be done against manufacturing defects.
What voids warranty:
If the product is subject to misuse, tampering, static discharge,mishandelling of the product, accident, water or fire damage, use of chemicals & soldered or altered in any way.
47 reviews for 4 Digit PC ISA PCI Analyzer Diagnostic Test Post Card
Clear filters
Welcome to mechBlock.in / Sun Enterprises We are a leading engineering and technology company based in India that specializes in cutting-edge mechanical and robotic solutions. Founded in 2020, our mission is to design and develop innovative systems that can help our clients improve efficiency, reduce costs, and enhance performance.
Our team of highly skilled engineers and technicians have extensive experience in the field of mechanical engineering, robotics, and automation. We have the knowledge and expertise to design, develop, and implement complex systems that can meet the unique needs of our clients.
We work with a wide range of industries including manufacturing, transportation, construction, and logistics to provide customized solutions that can improve productivity, safety, and performance. Our solutions range from advanced robotic systems to precision-engineered mechanical components, and everything in between.
We believe in delivering quality work and providing excellent customer service. We work closely with our clients to understand their requirements and deliver solutions that exceed their expectations. Our portfolio includes a wide range of successful projects, from automated assembly lines to precision robotic systems.
Our goal is to be the go-to partner for companies that want to leverage the latest mechanical and robotic technologies in India. We’re always looking for new challenges and opportunities to collaborate with companies that share our vision of a smarter and more efficient future.
More Products
DC 12V 240L/H Brushless Water Pump Waterproof Brushless Pump QR30E
In stock
Original price was: ₹600.00.₹490.00Current price is: ₹490.00. Incl GST (₹415.25 +18%GST)
SKU:
MB-BWPW
Lightburn Software – Gcode License Key, for Most Diode Laser Engravers On The Market (Single User )
In stock
₹5,099.00
SKU:
LightBurn
Mitsubishi QY40P PLC Output Unit 12/24 VDC
In stock
Original price was: ₹13,500.00.₹11,000.00Current price is: ₹11,000.00. Incl GST (₹9,322.03 +18%GST)
SKU:
MB-QY40P
USBASP USBISP 3.3 5V AVR Downloader Programmer
In stock
Original price was: ₹320.00.₹250.00Current price is: ₹250.00. Incl GST (₹211.86 +18%GST)
SKU:
MB-AVRDP
USONGSHINE 3D Printer Cooling Turbo Fan 4020 DC 24V/12V/5V Brushless DC Fan with XH2.54-2P 30CM Cable
In stock
₹200.00 – ₹250.00
Select options
This product has multiple variants. The options may be chosen on the product page
SKU:
Turbo4020-24/12/5
Anbarasi Chauhan (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Rajni Raghav (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Santa ben Mehta (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Krishan Garg (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Anil Narayan (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Ali Ansari (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Mitra Karthick (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Samina Khan (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Chaaya Mehta (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Nameen Bansal (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Nagamma Khan (verified owner) –
Adhiraj Rawat (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Ibhan Pandey (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Vasim (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Dhir Mishra (verified owner) –
Suraj Nair (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Jaya Parihar (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Zian Goswami (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Deshan Rawat (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Champa Kaushik (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Gurpreet Singh (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Chahna Tayal (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
KasturiBansal (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Biswajit Goel (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Anjay Saxena (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Prabha Ghosh (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Banhi Gupta (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Geet Chawda (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Sarita (verified owner) –
Dakshesh Patel (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Bandhul Chaturvedi (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Vala Dwivedi (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Kamlesh Kohli (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Shikha Pandey (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Drisana Banerjee (verified owner) –
Vijendra Kansal (verified owner) –
Deshal Apte (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Shrut Mallhotra (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Satyendra Bhatt (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Prasanna Joshi (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Chakrapaani Chaturvedi (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Sarasvati Verma (verified owner) –
Ishaan Goswami (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Vimla Patel (verified owner) –
Indubai Sinde (verified owner) –
Sudhir Gupta (verified owner) –
Mahinder Jha (verified owner) –