XTOOL
ATOMSTACK
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
P Series
S Series
F Series
M Series
D Series
xTool SafetyPro™ AP2 Air Purifier
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
SCULPFUN SF-A9
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Showing 321–340 of 723 resultsSorted by popularity
48V 500W Air Cooled Spindle Motor 52mm Diameter ER11 0.5Kw Engraving Spindle Motor
Out of stock
₹8,999.00 Incl.GST / ₹7,626.27 Excl.GST• SUITABLE FOR WOOD CARVING/DRILLING – The Spindle Motor can be widely used on equipment of high control demands and high rotation speed such as solid wood PCB carving, drilling and so on.
• HIGH SPPED&HIGH PRECISION – High speed, the idling can reach 12,000 revolutions per minute, high precision, spindle radial run-out 0.01-0.03
• GOOD PERFORMANCE – Runs smoothly with much lower noise, DIY engraver accessories, convenient to replace the broken one.
• BASIC PARAMETER – Working voltage: 100VDC, Rotating speed: Max. 12000 RPM, Insulation resistance: >2MΩ, Dielectric strength: 400V.
• APPLICATIONS – Can be used for solid wood, PCB, carving, drilling, etc.
Flush Wire Cutter – Plato 170
Out of stock
₹205.00 Incl.GST / ₹173.73 Excl.GST• This Flush Wire Cutter is perfect for cutting wire ends in hard to reach places creating a clean finish.
10pcs/set Ti Coated HSS 4 Flute milling cutter 1.5-6mm end mill
Out of stock
₹2,199.00 Incl.GST / ₹1,863.56 Excl.GST• Durable and practical
• Four flute design provides small chip loads and quicker removal
• Application material: wood, plastic, aluminum plate, etc.
• Suitable for DIY, home, general building, and engineering using.
2060 Black End Cap for 2060 V-Slot
In stock
₹239.00 Incl.GST / ₹202.54 Excl.GST• Add a finishing touch to your V-Slot project with this black anodized aluminum end cap.
Specially designed to fit 2060 profile.
Flexible Coupling D16L23
In stock
₹199.00• These Flexible couplings are used to transmit torque from a stepper motor to a lead screw, thus creating the movement in an actuator.
Nema 23 Stepper Motor Vibration Damper
In stock
₹272.00 Incl.GST / ₹230.51 Excl.GST• This Vibration Damper for Nema 23 Stepper Motors is designed to reduce noise and vibration created by the stepper motors.
• When it is used on X and Y axis, Stepper Motors with the vibration damper see a 5-10 dB reduction in noise.
• Material: Alloy + Rubber
• Size: Length – 75 mm, Width – 75 mm, Height – 8 mm
Shovel Plastic Removal Plastic Putty Spatula Scraper
In stock
₹249.00 – ₹299.00Material: Made of high-quality plastic materials, durable.
Color: black
Item Size:
2-Inch: 177 * 51mm / 7.0 * 2.0in
3-Inch: 177 * 76mm / 7.0 * 3.0in
Professional 3D printing model shovel tool.
Compatible with DLP SLA 3D printers such as Creality, Anycubic, Wanhao, TENLOG and so on.
Made of high quality plastic material, durable to use.
Good toughness and comfortable grip.
Ergonomics plastic handle.
Stripping Cable Cutter
In stock
₹149.00 Incl.GST / ₹126.27 Excl.GSTColor: Yellow
Material: ABS Stainless Steel
Length: 92 mm
Weight: 10 gm.
It works great and strips smoothly and cleanly.
This wire stripper is small and exquisite, which is very convenient and practical.
Silver Ballscrew Nut Housing Bracket Holder T8
In stock
₹350.00 Incl.GST / ₹296.61 Excl.GSTDesigned for T8 screw to facilitate linear motion for 3D printers, CNC lathes, etc.
Constructed from durable and anti-corrosive aluminum for longevity
Sized at 34x30x28mm and weighing 69g for compatibility with various applications
Comes with a polished surface and the option for manual polishing for smooth operation
2020 V-Slot Gantry Plate with Three Wheels Buckle
In stock
₹999.00 Incl.GST / ₹846.61 Excl.GST100% brand new and high quality
Material : Aluminium
Colour : Black
Item Weight : 113 Grams
Compatible Devices : Laptop, Smartphone
USONGSHINE 3D Printer Cooling Fan 4020 DC 24V/12V/5V Brushless Cooling Fan with 2Pin Wire Mini Fan for 3d Printer Parts
Out of stock
₹190.00 – ₹230.00Type : 4020 fan
Size : 40x40x20mm
Bearing : Oil bearing
Service life : 30000 hours
Voltage : DC 5V/DC 12V/DC 24V
For: stepper motor
Usage for: 3D Printer
Ramps 1.6 4-layer Control Panel Mainboard Expansion Board For 3D Printer Parts
In stock
₹650.00 Incl.GST / ₹550.85 Excl.GSTThe board can be extended to LCD and other parts.
The board has a heater and fan MOSFET outputs and 3 thermistor interfaces.
The LED will light when the heater has output.
The heated bed has additional 11A fuses.
Two Z motor outputs available in case you want to connect to Prusa type printer.
Has 5 stepper motor outputs.
The pin socket is designed to be easily replaced or removed for future design.
I2C and SPI pins are available for future expansion.
These connectors are gold-plated and have a rated current of 3A, which is very compact.
Support motor drivers: support A4988 and DRV8825
Two Trees 100K NTC Thermistor with XH2.54 Connector 1meter
In stock
₹139.00 – ₹150.00100k Ohm NTC Thermistor.
NTC Thin Film Thermistor Cable.
Nominal value: R25 (25 ℃) : (common) 1.5K, 2K, 5K, 10K, 20K, 30K, 47K, 50K, 100K, 200K, 500K, etc.
Resistance precision: ± 1%, ± 2%, ± 3%.
B value R25/50 (common) 3435k, 3600k, 3950k, 3990k, 4100k, 4200k, etc.
B value accuracy: ± 1%.
Recommend the use of parameters: R25℃ = 100 k B25/50 = 3950 k ± 1%)
Package Includes:
1 x 100k NTC Thermistor With Copper TIP for MK8 Extruder
OL-USB-TTL-CP2102 USB to Serial TTL CP2102 UART Port Module Machine Upgrade STC Adapter Board
Out of stock
₹160.00 Incl.GST / ₹135.59 Excl.GSTHardware Interface
USB
Style
Modern
Item Weight
5 Grams
Compatible Devices
Personal Computer
AT-09 Bluetooth 4.0 UART Transceiver Module CC2541 Compatible with HM-10
In stock
₹280.00 Incl.GST / ₹237.29 Excl.GSTUltra-low standby power consumption 90uA~400uA
Range up to 60 meters
Built-in PCB antenna
Power input : 3.6v to 6v DC (6v MAX)
GT2 Dual Bearing Idler Timing Pulley
In stock
₹180.00 – ₹199.00This pulley works with 10mm width GT2 (2mm) pitch Timing Belt. It works perfectly with the GT2 pulley-belt sets.
Use this with our 20 Teeth GT2 Timing Pulley
ACRO Acrylic Plate Set
Out of stock
₹1,300.00 Incl.GST / ₹1,101.69 Excl.GSTPrecision cut acrylic for the right fit
Saves time
Convenient
Thickness: 6mm (1/4″)
Material: Acrylic
Finish: High Gloss
Color: Black
40 PCS End Mills CNC Router Bits1/8″ Shank CNC Cutter Milling Carving Bit Set
Out of stock
Original price was: ₹5,000.00.₹3,999.00Current price is: ₹3,999.00. Incl.GST / ₹3,388.98 Excl.GSTHigh hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance.
Can be used with 1610, 3018, 3018pro and other engraving machines.
Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
Range of processing: PCB, SMT, the CNC, mold, plastic, aluminum and other precision parts processing.
C16-Er11-35L CNC Extension Rod Milling Holder Straight Shank Chuck Collet
In stock
₹2,000.00Fuselage length: 40mm (including nuts)
Body length: 35mm
Shaft hole: 8mm
External diameter of rod: 16
MPU-6050 6DOF 3 Axis Gyro With Accelerometer Sensor Module
Out of stock
Original price was: ₹159.00.₹109.00Current price is: ₹109.00. Incl.GST / ₹92.37 Excl.GST• Input Voltage: 3 ~ 5V
• Chip built-in 16bit AD converter, 16-bit data output.
• Digital-output temperature sensor.
• Selectable Solder Jumpers on CLK, FSYNC, and AD0.
