xTool M3 20 Screw for S1

The xTool M3*20 Screw for S1 is a dedicated replacement screw designed for connecting the xTool S1 with the S1 Class 4 Riser Base. This M3*20 screw is specifically used as part of the Class 4 Riser Base connection and has a standard usage of one piece.

Key Features

• Designed for the xTool S1
• Compatible with the S1 Class 4 Riser Base
• M3*20 screw specification
• Standard usage is 1 piece
• Used together with M3*14 screws for the Class 4 Riser Base setup

xTool M3*20 Screw for S1 Function

The xTool M3*20 Screw for S1 is used to connect the S1 and its Class 4 Riser Base. According to xTool, one M320 screw is required for this configuration, along with five M314 screws.

The screw also plays a role in the S1’s baseplate and riser-base detection system. xTool’s support documentation explains that, when using the Class 4 Riser Base, the three detection screws consist of one M320 screw and two M314 screws. The M320 screw is positioned in the middle, with the M314 screws above and below it.

Compatibility

Installation and Replacement

The xTool M3*20 Screw for S1 should be installed in the designated position when using the S1 Class 4 Riser Base. xTool specifies that the M320 screw is used together with M314 screws in this configuration.

Before installation, check that the screw is undamaged and properly fastened. xTool notes that damaged, missing, or improperly fastened screws can affect the S1’s ability to detect the baseplate or riser base.

Important Usage Considerations

Use the xTool M3*20 Screw for S1 specifically for the compatible S1 and Class 4 Riser Base configuration. Do not confuse it with the M3*14 screws used in other S1 riser-base configurations.