₹249.00 Incl.GST / ₹211.02 Excl.GST
In stock
In stock
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Description
Aluminum Heater Block 3d printer heater block:Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)Heater Mounting Hole: 6mm diameterThermocouple Mounting Holes: 3mm diameterSuitable for Makerbot printer12V 40W 620 Ceramic Cartridge Heater:Material: 304 stainless steelLead wire: 0.3 squareResistance: 2080 high temperature resistant high quality oxide powderApplication:1 Semiconductor chamber heating2 Semiconductor wafer lead connection3 Semiconductor wire and die bonding4 Freeze protection and deicing of equipment in cold climates or applications5 Humidity Control6 Patient Comfort heating used in medical devices7 Mold die and platen heating8 Seal bars used in packaging equipment9 Test sample heating in gas chromatographyNTC 3950 100K Thermistor:For 3D printers: use TEMP_SENSOR 11 in Marlin firmwareSmall Size: 1.25mmx2.0mm glass beadHigh accuracy: 1%Resistance value at 25รธC=100KWiring insulation: high temperature teflon / PTFEPackage Including5 * 3d printer heater block5 * 12V 40W 620 Ceramic Cartridge Heater5 * NTC 3950 100K Thermistor
49 reviews for Twotrees Mk7 Mk8 Aluminium Heater Block For Print Head Hot End Heating Block 20x20x10 Mm For 3d Printer Bluer
Clear filtersMore Products
C-Beam Linear Actuator Kit with motor Assembled
In stock
xTool SafetyPro IF2 Hyper Flow Inline Duct Fan – S1
In stock
Tr8x2 Metric ACME Lead Screw – 290mm
In stock
Twotrees MK8 Extruder Upgraded Aluminum Block Bowden Extruder 1.75mm Filament Reprap Extrusion – Right hand
In stock
C-Beam Linear Actuator Kit without Motor Assembled
In stock
Simla Patel (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Deepa Bansal (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Vijay Rai (verified owner) –
Kailas Jha (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Anala Parihar (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Rajni Raghav (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Leela Mittal (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Vijna Chadha (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Rupinder Parihar (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Anupriyaa Chauhan (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Ratan Lal (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Uttam Goswami (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Dayanand Shinde (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Sushil Nadar (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Bhaskar Gupta (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Dhavlen Shinde (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Baldev Singh (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Nita Kohli (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Chella Narayan (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Nilima Jain (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Aniruddh Garg (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
UsaNegi (verified owner) –
Harshil Agarwal (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Gana Dubey (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Tanay Mishra (verified owner) –
Aija Rawat (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Ghalib Pandey (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Amit Dedha (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Malati Gaikwad (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Arvind Kuswaha (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Pushpa (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Basudeb Das (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Geeta Anand (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Smriti Gupta (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Hemanta Grover (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Nand Kumar (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Shailendra Deepa (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Galav Dubey (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Chahna Tayal (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Jai Goswami (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Garuda Dubey (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Aman Bansal (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Sujay Anand (verified owner) –
Gajaanan Dubey (verified owner) –
Gulshan Apte (verified owner) –
Ehan Jha (verified owner) –
Srinivas (verified owner) –
Ranjit Kansal (verified owner) –
Chaaya Jaiswal (verified owner) –