Smoke Exhaust Module for xTool M1 Ultra

The Smoke Exhaust Module for xTool M1 Ultra is a dedicated exhaust component designed for the xTool M1 Ultra. It is used to exhaust smoke generated during processing, making it an important part of the machine’s exhaust setup. xTool confirms that this smoke exhaust module is compatible with the M1 Ultra.

Key Features

• Designed specifically for the xTool M1 Ultra
• Used to exhaust smoke generated during processing
• Compatible with the xTool M1 Ultra
• Includes a filter as part of the exhaust setup
• Suitable as a replacement smoke exhaust module

Smoke Exhaust Function

The Smoke Exhaust Module for xTool M1 Ultra helps manage smoke produced during processing by exhausting it from the machine. The module is installed at the smoke outlet on the back of the M1 Ultra.

The xTool M1 Ultra user guide specifies that a filter should be installed on the smoke exhaust module before use. xTool also warns not to operate the smoke exhaust module without the filter, as this may allow smoke and dust to enter the module and cause damage.

Compatibility

Installation and Maintenance

The smoke exhaust module is installed in the smoke outlet on the rear of the xTool M1 Ultra. Before operation, install the appropriate filter in the module as instructed by xTool.

The M1 Ultra also provides exhaust-related settings, including exhaust fan speed and exhaust time after processing, through its operating software.

Important Usage Considerations

• Use this module with the xTool M1 Ultra.
• Install the filter before operating the smoke exhaust module.
• Do not operate the module without its filter.
• Follow xTool’s installation and maintenance instructions for proper use.