XTOOL
IKIER
SCULPFUN
ORTUR
TWOTREES
Diode Laser Machines
Laser Modules
Laser Machine Accessories
xTool F1
XTool P2
xTool D1 Pro 40W + 10W Kit
xTool D1 Pro
xTool M1
Air Assist Set
Honeycomb Panel Set
Extension Kit
Motheboard
Rotary Roller
Honeycomb
Extension Kits
Towers Support Shelf Block
SCULPFUN SF-A9
SCULPFUN S10
SCULPFUN S9
Gantry Carts Kits
Wheels
Replacement Module for SCULPFUN S10 10W Laser Engraver
₹32,990.00 (Incl. GST)
Drop In T-nuts
₹11.00 – ₹23.00 (Incl. GST)
Replacement Module For ATOMSTACK X7 Pro M50 10W Laser Engraver
₹38,990.00 (Incl. GST)
ATOMSTACK X7 pro 10W Laser Engraver Module
Can be used for laser cutting machine, laser engraving machine, CNC, DIY laser.
Upgraded high-quality fixed focus laser, no need to focus.
Out of stock
Out of stock
11
People watching this product now!
Mechblock Shopping Event
Hurry and get discounts on all Mechblock Products up to Rs.1000
Coupon code: MECHBLOCK
Replacement Module For ATOMSTACK X7 Pro M50 10W Laser Engraver
Features:
1. Can be used for laser cutting machine, laser engraving machine, CNC, DIY laser.
2. Laser protective cover: The laser is equipped with a protective cover to protect the user’s eyes without wearing additional protective glasses. At the same time, prevent pets from grabbing the laser spot.
3. Made of aluminum, strong and durable.
4. Upgraded high-quality fixed focus laser, no need to focus.
5. Aviation aluminum TTL driver board and cooling fan can ensure continuous work for a long time.
6. Engravable materials: wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective plating, lacquered metal, utility knife after blackening.
7. Cuttable materials: cardboard, non-woven fabric, veneer, acrylic, some thin plastic sheets.
8. 0.08*0.08mm double compression condensing light coupling technology makes engraving more powerful and precise.
9. The engraving speed is 200% higher than other 5W lasers.
10. High energy can cut 8.5mm thick board at one time.
11. The laser sintering temperature is 1200℃, and the effect of engraving metal is better.
12. The air collecting hood can clean the smoke and dust, protect the lens, and irradiate the laser.
Specifications:
| Product material | Aluminum product 6061 anodized treatment |
| Shell size | 44*52*50mm/1.73*2.05*1.97″ |
| Circuit board | 12V/PWM modulation board |
| Circuit board size | 40*40mm/1.57*1.57″ |
| Working temperature | 0℃-70℃ |
| Working mode | Pulse work |
| Laser beam mode | fixed focus |
| Spot size | 30mm＜1mm |
| Optical lens | 6/glass fiber |
| Optical output power | 9.5-10W |
| Laser wavelength | 455-460 |
| Working current | 2.9-3.2A |
| Working voltage | 12V |
| Product life | 10000H |
| Storage temperature | -40℃-85℃ |
| Product net weight | Â 300g |
- Engravable Materials: wood, bamboo, cardboard, plastic, leather, aluminum, non-reflective electroplating layer and lacquered metal, after blackening utility knife. and can cut wood, acrylic ect. the laser sintering temperature is 1100 degrees, the effect of engraving metal is better.
Specifications:
| Product material | Aluminum product 6061 anodized treatment |
| Shell size | 44*52*50mm/1.73*2.05*1.97″ |
| Circuit board | 12V/PWM modulation board |
| Circuit board size | 40*40mm/1.57*1.57″ |
| Working temperature | 0℃-70℃ |
| Working mode | Pulse work |
| Laser beam mode | fixed focus |
| Spot size | 30mm＜1mm |
| Optical lens | 6/glass fiber |
| Optical output power | 9.5-10W |
| Laser wavelength | 455-460 |
| Working current | 2.9-3.2A |
| Working voltage | 12V |
| Product life | 10000H |
| Storage temperature | -40℃-85℃ |
| Product net weight | Â 300g |
Features:
1. Can be used for laser cutting machine, laser engraving machine, CNC, DIY laser.
2. Laser protective cover: The laser is equipped with a protective cover to protect the user’s eyes without wearing additional protective glasses. At the same time, prevent pets from grabbing the laser spot.
3. Made of aluminum, strong and durable.
4. Upgraded high-quality fixed focus laser, no need to focus.
5. Aviation aluminum TTL driver board and cooling fan can ensure continuous work for a long time.
6. Engravable materials: wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective plating, lacquered metal, utility knife after blackening.
7. Cuttable materials: cardboard, non-woven fabric, veneer, acrylic, some thin plastic sheets.
8. 0.08*0.08mm double compression condensing light coupling technology makes engraving more powerful and precise.
9. The engraving speed is 200% higher than other 5W lasers.
10. High energy can cut 8.5mm thick board at one time.
11. The laser sintering temperature is 1200℃, and the effect of engraving metal is better.
12. The air collecting hood can clean the smoke and dust, protect the lens, and irradiate the laser.
- Engravable Materials: wood, bamboo, cardboard, plastic, leather, aluminum, non-reflective electroplating layer and lacquered metal, after blackening utility knife. and can cut wood, acrylic ect . the laser sintering temperature is 1100 degrees, the effect of engraving metal is better.
| Weight | 1 kg |
|---|---|
| Dimensions | 20 × 20 × 10 cm |
| Brand | |
| HSN Code | |
| Condition | |
| Optical Power | |
| Electrical Power | |
| Control Software | , |
| Laser Spot Size(mm) |
52 reviews for Replacement Module For ATOMSTACK X7 Pro M50 10W Laser Engraver
Clear filters6 Months Warranty
This item is covered with a supplier warranty of 6 months from the time of delivery against manufacturing defects only. This is a quality product from the original manufacturer. Only manufacturing defects are covered under this warranty. Reimbursement or replacement will be done against manufacturing defects.
What voids the warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
Shenzhen Atomstack Technologies Co., Ltd is an enterprise dedicated to the manufacture of smart products. The product category covers DIY Laser Engraver and Infrared Laser. Atomstack is constantly pursuing the upgrading of product working capabilities, especially in the area of accuracy and efficiency of creation. We strive to help every DIY maker and creator to achieve efficient creation and excellent work.
More Products
ATOMSTACK Extension Towers Support Shelf for Atomstack R3 Rotary Roller
In stock
₹1,999.00 (Incl. GST)
SKU:
ATOMR3TOW
ARM STM32 Arduino Minimum System Dev Board
In stock
Original price was: ₹399.00.₹299.00Current price is: ₹299.00. (Incl. GST)
SKU:
MB-STM32
Sabina Khatoon (verified owner) –
Thank you guys for this amazing creation! Absolutely mind-blowing!
Chandrashekhar Singh (verified owner) –
I think this is amazing. Lots of features and customizable from every point of view. The few times I asked for help in support they were competent, fast and above all very patient. Really recommend
Jakir Khan (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Lipika Jaiswal (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Aatmik Rawat (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Bhaskar Bansal (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Balvir baisla (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Nanda Ghosh (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Devak Jha (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Namita Thappar (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Nitu Bisht (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Satya Daggar (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Lali Jain (verified owner) –
Omprakash Pandey (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Azha Mishra (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Manjula Achari (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Raghunath Pandey (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Viswaroopin Goswami (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Premvati Sinha (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Veena Anand (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Kaivalya Dwivedi (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Bablu Kumar (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Shanti Mishra (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Vanita Tayal (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Jayaprakash Gandhi (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Sona Iyengar (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Balaram (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Ashish Narayan (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Lakshmi Apte (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Madhavi Iyengar (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Bhagavan Mehto (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Akhilendra Rawat (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Vimal Hebbar (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Nikhil Karthick (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Eshan Jha (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Uttam Gowda (verified owner) –
Rameshwar Dwivedi (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Rames (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Manju Kumari (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Kiaan Dwivedi (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Manda Ghosh (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Daya Shankar (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Bhagwan Singh (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Bimal Desai (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Charu Parihar (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Artha Parihar (verified owner) –
Saarik Gupta (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Amruta Agarwal (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Raja Mohan (verified owner) –
Lakshmamma (verified owner) –