Threaded Round Spacers
Price range: ₹7.00 through ₹65.00
Makerlink 90 Hidden Tee Nut M5
₹32.00 Incl.GST / ₹27.12 Excl.GST
New
Makerlink Quad Tee Nut
• Makerlink Quad Tee Nut Allows the creation of an end-to-end junction. Can be used with our entire range of 6mm slot profiles. To be used preferably in pairs for a reinforced assembly.
₹33.00 Incl.GST / ₹27.97 Excl.GST
77 in stock
77 in stock
Shipped from Our Delhi Warehouse
Description
Quad connecting T-Nuts make a strong end to end connection for V-Slot while still allowing gantry carts to ride along the V groove.
Quad Tee Nuts Makerlink make a strong end to end connection on any Linear Rail while still allowing Wheels to run along the channel.
Great for connecting V-Slot end to end creating projects needing longer lengths!
Features:
- Shiny Nickel Plating
- Made from Strong Steel
- Two per joint, used in parallel, create a rigid joint system
- Extend to any lengths
- Rounded corners for easy sliding
- Compatible with V-Slot and C-Beam Linear Rails
Package Included:
- Quad Tee Nut Makerlink
- M5 Set Screws
Jayaram Sharma (verified owner) –
This is the coolest thing I’ve found on here! Will keep using your products in the future!
Shriram Sharma (verified owner) –
This is the coolest thing I’ve found on here! Will keep using your products in the future!
Indira Bansal (verified owner) –
The item and the design are very cool. Also the support is amazing, they always help you with any detail that you have.
Kashvi Parihar (verified owner) –
Wished I had found this sooner, it took me a lot of money and time until I found my dream product here!
mechblock –
Thank you for your kind review! It’s a big encouragement to us!
Parbati Hansraj (verified owner) –
Thank you guys for this amazing creation! Absolutely mind-blowing!
mechblock –
Your kind words just made our days! Thank you so much!
Varun Parihar (verified owner) –
The item and the design are very cool. Also the support is amazing, they always help you with any detail that you have.
mechblock –
We’re glad you are satisfied with our item! Will do our best to keep improving it in the future.
Kapil Shaarma (verified owner) –
Quite easy to use, nice design, surely will buy again
Anand Goel (verified owner) –
Been using it for a while, I usually don’t write a review but this time I am truly convinced to write.
Hiresh Dwivedi (verified owner) –
Great item! It provides too many things compared to its price charged.
Balraj Rawat (verified owner) –
Thank you guys for this amazing creation! Absolutely mind-blowing!
Lipika Jaiswal (verified owner) –
The item and the design are very cool. Also the support is amazing, they always help you with any detail that you have.
Santi Jha (verified owner) –
Been using it for a while, I usually don’t write a review but this time I am truly convinced to write.
Banhi Tayal (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
MithunIyer (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Vandana Chawla (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Aagney Garg (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Acchutan Garg (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Sukanti Joshi (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Raghav Goel (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Varoun Agarwal (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Aarti Kashyap (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Veena Anand (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Rima Sinha (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Chintak Rawat (verified owner) –
MantuSingh (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Drisana Banerjee (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Vimala Gulati (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Neha Mehta (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Anshu Rawat (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Nihal Sethi (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Kiaan Pandey (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Campaben Desai (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Rupali Singh (verified owner) –
Perfect machine, well packaged, great engraving and cutting, worth buying!
Citra Jain (verified owner) –
Very fast shipping, arrived quicker than I thought, everything in perfect condition, no damage and complete with accessories. I have tested the machine and everything works fine. This machine is really nice, I love it. I will recommend it to my friends!
Mahit Dwivedi (verified owner) –
I did find that there was some smell while using it and found it would be better to use this engraver in a ventilated area. I think it should be necessary to buy another air assist to direct the airflow to the outside, the effect will be better!
Andal Verma (verified owner) –
Equipped with detailed assembly instructions, making assembly very easy to complete in 30 minutes. This laser machine is also suitable for inexperienced users. I am very satisfied!
Aravind chopra (verified owner) –
I am very satisfied with the engraving machine, I am a beginner and would like to familiarize myself with this equipment. It definitely fits the purpose. Looking forward to the effect!
Archana Jha (verified owner) –
Very nice machine. With Lightburn very easy to work with it.
Dayanita Apte (verified owner) –
I am a beginner and this laser engraver is equipped with everything I need. I USED GBRL SOFTWARE WITH A MAC SYSTEM AND THE CONNECTION WAS EASY. When cutting wooden blocks, I find it as easy as carving planks. And the effect is not bad, it is a good laser machine.
Suresa Dwivedi (verified owner) –
Johar Mishra (verified owner) –
Easy assembly, directions were very easy to follow. Download light burn and easy to setup. Tested it out and did my Sasquatch for my cutting boards.
Adamya Rawat (verified owner) –
This machine is the best I’ve ever seen, great quality, beautiful packaging, top notch engraving and cutting, thanks MechBlock!
Gajendra Srivastav (verified owner) –
The machine came a few days earlier than stated. Very well packaged and the installation also went smoothly. After I executed the commands and calibrated the device, everything went as it should and the machine correctly found the position of the laser head. I hope that it will remain stable in the future and that the values will remain as it is calibrated. Everything works correctly I am really impressed with the performance of the machine and the results of the laser work.
Sunil Jaiswal (verified owner) –
Fast shipping and perfectly packaged. The laser machine is of high quality, operated according to the instructions, even beginners can master it quickly, everything is as described, it is great.
Shaarad Mallhotra (verified owner) –
Sujay Anand (verified owner) –
Harshil Patel (verified owner) –
Deepa Gupta (verified owner) –
Priya Kohli (verified owner) –
KamalaRani (verified owner) –